Mineral Water Filling Machine Dealers in Ahmedabad

RFC series machine is a fully automatic multi functional combined machine integrating washing, filling and capping into single body. This machine is equipped with advanced man-machine interfacial control technology with all necessary automations. It works on hanging neck holding method. Hence, very convenient bottle changeover. Versatile machine to pack mineral water as well as other beverages like fruit juice, square etc. which are filled at higher temperature by changing some parts. OPERATION : BOTTLE IN-FEED & RINSER SECTION : The in-feed star wheel has spring loaded neck gripper fingers, which compensates for minor variation in bottle-neck diameter. The bottles fed by air conveyor are picked by fixed size neck star neck and transferred between grip fingers. This eliminates the need of feed worm and change parts for different sizes of bottle body diameter. The neck spider transfers the bottles on to rinsing turret, which has neck gripping fingers to carry the bottle around rinsing. The spray nozzles have No Bottle – No Rinsing spray mechanism, which saves water. The rinsing takes place during 90 degree rotation of turret. Thereafter for next 90 degrees bottles are tilted back by small angle to give adequate draining time. BOTTLE TRANSFER & FILLING SECTION : Duly rinsed and drained bottles are again picked by star wheel and transferred to filling lifter gripper platform. The filling lifters operate on positive cam lift-off principle and do not use compressed air or spring load. Lift cylinder cam is made of stainless steel and machined to fine finish and have simple harmonic motion profile to life bottles smoothly and to fill valve. The filling valve works on gravity filling system but has AIR EXHAUST mechanism, which removes stagnant air from the bottle to outside atmosphere. The top of the filling bowl/tank is fitted pneumatically operated filling valve to single line pipe, which can be piped to outside of the filling room. The filling bowl is fitted with electronic level controller to regulate liquid level in the bowl through pneumatic ON-OFF valve. PLASTIC SCREW CAPPER : There is No Bottle No Cap interlock provided on cap delivery star wheel. The bottles are detected by non-contact infrared sensor to stop the cap delivery. The capping chucks are finest quality precision component fitted with magnetic torque controlling mechanism. This eliminates heat generation which normally occurs in friction type coupling in the chucks. Flexible segmented cap holder picks up the caps. This compensates minor variation in cap diameter occurring due to long storage of caps in the boxes. The capping torque can be set accordingly in minimum of time and set torque in maintained. The capping turret has Pick N Place type cap pick up mechanism, which delivers the cap in the cap holders of capping chucks. CAP ELEVATOR CUM HOPPER : A very specially designed elevator cum selector hopper, which can be provided on selection. The hopper is placed at floor level and can hold up to 5000 caps. Bucket type fingers elevate the caps and right direction caps are allowed to go in to the deliver chute while wrong direction caps are dropped back in the main hopper. The cap delivery chute can be fitted with ozonised water rinse and clean air jet blow to remove water (optional). After that Ultraviolet type of inline cleaning can also be provided on request. The chute has high level and low level infrared sensors. On low-level signal – elevator motor starts and high-level motor stops. The cap rinse water line and clean blow airline has solenoid valves interlocked with main motor. If machine stops – both solenoid valves closes the supply. LUBRICATION SYSTEM : There is central lubrication system, which supplies oil to all vital running components. Manual grease points are placed in convenient locations and grouped together for easy access. APPLICATION : Mainly used for PET bottles mineral water, hot filling of Juice into PET or still water bottling line. For other bottles, contact with our sales representatives.   SALIENT FEATURES Rotary neck holding. Air Blow Conveyor on the in feed. Slat Belt Conveyor on the out feed with the AC Drive and Inspection Table with lighting system & White-black background. No Bottle - No Rinse - No Fill - No Cap. Unique Pick & Place type Capping. Drive is on chain of gears (Not Indexing Cam) hence low on maintenance. Speed Control by AC Drive. Cap Elevator for feeding cap to the chute with automatic operation. Speed indicator on main panel. Can handle all bottle size ranging from 200 up to 2000 ml. Capping done by “Torque Adjustable” magnetic capping heads using two stage Pick & Place system. Stainless Steel enclosure provided for complete hygienic bottling. Easy operable nozzles for easy cleaning. Can handle bottles blown from low gram mage Performs without distortion. Can be linked directly to Automatic Blow Melding Machine for online Blow- Rinse-Fill-Seal. Compatible with Online Shrink Tunnel, Labelling Machine or Ink Jet Printer. OPTIONAL FEATURES : Motorized Height Adjustments. Automatic chain washing system for conveyor belt. In-built pre-inspection. Nitrogen Flushing. Cap Elevator to feed caps to the cap feeding bowl.

Manufacturer & exporter of Automatic Liquid Filling Machine & Automatic Electronic Filling Machine. Our product range also comprises of Semi Automatic Liquid Filling Machine and Volumetric Liquid Filling Machine. Gained prominence in the industry as a reliable organization, we are engaged in providing Automatic Liquid Filling Machine. Widely demanded in food processing, beverages and dairy industries, our offered filling machines are provided in various specifications. These machines are delivered timely to gain maximum client-satisfaction.

• Driven Type: Mechanical
• Material: Stainless Steel
• Packaging Type: Wooden Box
• Brand Name: Multipack Machines
• Capacity: As per Client Requirement
• Filling System: Fully Automatic
• Usage/Application: As per requirement
• Machine Type: Automatic, Semi-Automatic
• Minimum Order Quantity: 1 Piece

Bottle filling cannot be done manually in modern industries where bulk filling is a regular requirement. The manual filling processes can affect consistency, and will consume a considerable amount of time. Also there will be sheer wastage in the form of spilling etc. GIECL offers bottle filling machines that are useful in industrial packaging processes. Our Filling Machines are equipped with salient productive features and automated technology. The durable and compact machinery is suitable for filling all kinds of carbonated drinks,water,beverages,soft drinks, water etc. The Bottle filling and Capping Machine comes with infeed and outfeed conveyor with S.S. PVC Shrink Tunnel and along with an inspection Table. The machine is operator friendly, demands low maintenance and consumes less power.It is adept at filling bottles at a high speed and with impeccable accuracy.

We are renowned as the foremost manufacturer and supplier of the high quality Mineral Water Bottle Filling Machine. Our offered filling machine finds application in various places due to its flawless performance. Mineral Water Bottle Filling Machine is manufactured using top grade material and advanced technology at our end in compliance with the international standards. Also, our provided filling machine is given in varied other related specifications. Features :  Automatic Grade Automatic  Condition New  Machine Capacity 60-240 bottles/min  Driven Type MECHANICAL  Power Consumption 6-12HP  Dimension(L*W*H) 6*6*6  Capacity 24-120BPM Features :  High effectiveness  Smooth performance  Low maintenance cost

• Finishing: Polished
• Packaging Type: Carton Box, Wooden Box, Metal Sheet Box
• Power: 10 KW, 10-50 KW, 50-100 KW
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Dimension (LxWxH): 275x90x285mm, 480x190x285mm, 580x260x465mm
• Range: 24 BPM to 120 BPM

• Voltage: Up To 380 V
• Brand Name: UV Fill Pack Engineers
• Capacity: 500-1000 Cup/Min
• Driven Type: Electric
• Material: SS
• Frequency (Hz): 50
• Machine Power: 1-2 HP

Our company is one of the most experienced companies engaged in the prominent manufacturers and suppliers of Bottled Water Filling Machines. These Water Bottle Filling Machines can be used for filling water into various packing’s such as Pet Bottles (with all volumes and shapes for still water, pure water, RO water, mineral water, sparkling water, etc.), Plastic Jars, and Plastic Cups. The filling section is equipped with spring loaded nozzles. Once the bottles are picked they spring loaded nozzles are activated by a Drum Cam Mechanism. Since the machine is equipped with gravity filling the accuracy of filling is maintain as there is no foaming. The filling nozzles are made of SS316 and the Filler tank is completely electro polished and this reduced possibilities of microbial growth.     These machines are fabricated in compliance with industry standards, these Water Bottle Filling Machinesare highly appreciated for their capacity and economical functioning. Our Bottled Water Filling Machines has a host of advantageous Features adding up to its excellent performance and longer service life. These machines are designed and tested by the engineers of our company to give flawless performance. Our manufacturedWater Bottle Filling Machines have long shelf life and are highly in demand among the clients.     The offered ranges of Bottled Water Filling Machines are made utilizing high grade raw material and innovative techniques in strict observance that meets the international quality standards. Along with this, the offered assortment of these Bottle Filling Machines is applicable in different areas such as pharmaceutical, beverages, cosmetics and allied. We have the capacity of manufacturing the machines giving the following output for bottles: 24, 40, 60, and 90 Bottles per minute.   Salient Features of Bottled Water Filling Machine Fully Neck Holding, hence bottle with very low perform weight can also run without suffering any distortion or scratch marks. Machine is infinitely adaptable for all sizes ranging from 200 to 2000 ml. Changeover time from one bottle size to another is the bare minimum. Rotary, monoblock construction having SS304 fully cladded platform and housings. No Change Parts involved for running different bottle sizes. Vent Pipe filling, without spillage for consistent level filling. Pick and Place principle followed by two stage progressive capping. Automatic cap elevator / orientator with SS304 ground level hopper provided. No Bottle - No Rinse / No Fill / No Cap, absolutely no wastage of precious inputs. Air conveyor on in feed side for operation without vertical height adjustment. SS304 housing pumps with internal SS piping provided with the machine. Electrical control panel with all necessary safety Features.

The healthiest kind of bottled water is packaged water and drinking this water each day can help you enhance your overall health and well-being. Packaged water is able to do so much good because it contains essential minerals such as iron, calcium and magnesium. Even better, mineral water, unlike tap water, will be free of added chemicals as well as preservative-free and completely natural.

• Port: Mundra,Gujarat , India or Mumbai Port India
• Packaging Details: Air worthy / Sea worthy packaging for Export and Crate packaging / base mount packaging for domestic consumption
• Supply Ability: As per Customer order , number of machines can be provided.

• Brand Name: LABH
• Weight: Approx. 1000 Kg
• Automatic Grade: Automatic
• Certification: ISO, CE
• Power: 2 KW
• Application: Beverage
• Place of Origin: Gujarat, India
• Dimension(L*W*H): Approx. 3 Sq. Mtr.
• Packaging Details: Sea-worthy export wooden box packing or Air-worthy ply-wood box packing as per requirement. Suitable for shipment to any destination across the Globe.
• Packaging Material: Plastic
• Working Capacity: 24 hours x 7 days
• Packaging Type: Bottles
• Working Temperature: 20 to 40 degree centigrade
• After-sales Service Provided: Engineers available to service machinery overseas
• Port: Mumbai, India
• Type of Cap: Plastic Screw Cap
• Speed: up to 12000 packs / hour
• Type of Bottles: PET
• Contact Parts: Stainless Steel or Equivalent
• Operation: Rinsing, Filling, Capping

• Brand Name: Siddhivinayak engineering
• Model No: SVVLF - 100,SVVLF - 150,SVVLF - 200
• Output Per Hour: 2400 to 6000,3600 to 9000,5000 to 12000
• Direction of Movement: Left to Right
• Number of Head Syringe: 4 Nos,6 Nos,8 Nos
• Fill Size: 5 ml to 1000 ml
• Electrical Specs Of Main Machine: 1 HP /415 Volts / 50 Hz,1.5 HP /415 Volts / 50 Hz.
• Electrical Specs Of Conveyor: 0.5 HP / 415 Volts / 50 Hz.
• Height of Conveyor: 860 mm to 910 mm Adjustable
• Changes Parts Required: (A) Syringes (B) Nozzle (C) Inlet & Outlet Hose Pipe

We are offering mineral water filling machine. we offer sustainable solutions to our clients and to the society at large in enhancing the quality of life of the people concerned. To make consistent initiative in widening our range of products, services, operations and to offer customized solutions to our clients in all sphere of activities

Description this is high standard advance touch screen plc base rotary pet bottles rinsing filling capping machine. This machine mainly used for washing, filling and capping of non-aerated drink such as mineral water, pure water, non-gas wine drink, synthetic flavoured juice and so on. The machine design is shorten the time for the packaging of pet bottle, outside contamination and increased the sanitation condition throughout the machine and economical too. It adopts neck holding type conveying-bottle structure to make changing bottle model more convenient, faster and easier. The main machine adopts advanced plc control technology with gravity filling systems and valves. Main parameters type 12-04-01 08-08-03 12-12-06 14-12-05 18-18-06 24-24-08 32-32-10 wash no. 12 08 12 14 18 24 32 filling heads 04 08 12 12 18 24 32 capping heads 01 03 0 6 05 06 08 10 productivity 1200bph 3000bph 6000bph 5000bph 8000bph 10000bph

• Brand Name: Associated
• Driven Type: Electric
• Voltage: 230 V
• Machine Capacity: 60-240 bottles/min
• Bottle Type: Pet
• Frequency: 50 - 60 Hz
• Phase: 3 Phase
• Packaging Type: Bottle

RFC series machine is a fully automatic multi functional combined machine integrating washing, filling and capping into single body. This machine is equipped with advanced man-machine interfacial control technology with all necessary automations. It works on hanging neck holding method. Hence, very convenient bottle changeover. Versatile machine to pack mineral water as well as other beverages like fruit juice, square etc. which are filled at higher temperature by changing some parts. OPERATION : 1. BOTTLE IN-FEED & RINSER SECTION : The in-feed star wheel has spring loaded neck gripper fingers, which compensates for minor variation in bottle-neck diameter. The bottles fed by air conveyor are picked by fixed size neck star neck and transferred between grip fingers. This eliminates the need of feed worm and change parts for different sizes of bottle body diameter. The neck spider transfers the bottles on to rinsing turret, which has neck gripping fingers to carry the bottle around rinsing. The spray nozzles have No Bottle – No Rinsing spray mechanism, which saves water. The rinsing takes place during 90 degree rotation of turret. Thereafter for next 90 degrees bottles are tilted back by small angle to give adequate draining time. 2. BOTTLE TRANSFER & FILLING SECTION : Duly rinsed and drained bottles are again picked by star wheel and transferred to filling lifter gripper platform. The filling lifters operate on positive cam lift-off principle and do not use compressed air or spring load. Lift cylinder cam is made of stainless steel and machined to fine finish and have simple harmonic motion profile to life bottles smoothly and to fill valve. The filling valve works on gravity filling system but has AIR EXHAUST mechanism, which removes stagnant air from the bottle to outside atmosphere. The top of the filling bowl/tank is fitted pneumatically operated filling valve to single line pipe, which can be piped to outside of the filling room. The filling bowl is fitted with electronic level controller to regulate liquid level in the bowl through pneumatic ON-OFF valve. 3. PLASTIC SCREW CAPPER : There is No Bottle No Cap interlock provided on cap delivery star wheel. The bottles are detected by non-contact infrared sensor to stop the cap delivery. The capping chucks are finest quality precision component fitted with magnetic torque controlling mechanism. This eliminates heat generation which normally occurs in friction type coupling in the chucks. Flexible segmented cap holder picks up the caps. This compensates minor variation in cap diameter occurring due to long storage of caps in the boxes. The capping torque can be set accordingly in minimum of time and set torque in maintained. The capping turret has Pick N Place type cap pick up mechanism, which delivers the cap in the cap holders of capping chucks. 4. CAP ELEVATOR CUM HOPPER : A very specially designed elevator cum selector hopper, which can be provided on selection. The hopper is placed at floor level and can hold up to 5000 caps. Bucket type fingers elevate the caps and right direction caps are allowed to go in to the deliver chute while wrong direction caps are dropped back in the main hopper. The cap delivery chute can be fitted with ozonised water rinse and clean air jet blow to remove water (optional). After that Ultraviolet type of inline cleaning can also be provided on request. The chute has high level and low level infrared sensors. On low-level signal – elevator motor starts and high-level motor stops. The cap rinse water line and clean blow airline has solenoid valves interlocked with main motor. If machine stops – both solenoid valves closes the supply. 5. LUBRICATION SYSTEM : There is central lubrication system, which supplies oil to all vital running components. Manual grease points are placed in convenient locations and grouped together for easy access. APPLICATION : Mainly used for PET bottles mineral water, hot filling of Juice into PET or still water bottling line. For other bottles, contact with our sales representatives. TECHNICAL SPECIFICATION BRAND BHAGWATI Model SBFILL SBRFC-100 Product to be Filled Water Fill Volume 200 to 2000 ml. Output/Min  30-150 depending on fill volume Water Pressure 1500 BPH Rinsing Water Consumption 0.2 ~ 0.25 Mpa Power Consumption 5.03 KW Weight 3500 Kgs

We are offering mineral water filling machine, rfc series 3-in-1 triblock machine is composed of rinser, filler and capper, which adopts and absorbs advanced technology and is manufactured according to drinking water juicetea beverage production technical requirement. It uses outer-circulation pressure filling method with sound cip cleaning function for juice and pressure gravity for water.

• Driven Type: Electric
• Type: Filling Machine
• Automatic Grade: Automatic
• Certification: ISO 9001 2015
• Condition: New
• Application: Beverage, Chemical, Food, Medical
• Packaging Type: Bottle
• Packaging Details: Product & transport worthy wooden packing
• Model Number: ALFCM
• Place of Origin: Gujarat, India
• Packaging Material: Glass, Plastic
• Port: Ahmedabad / Nhava Sheva
• After-sales Service Provided: Engineers available to service machinery overseas

• Automatic Grade: Automatic
• Material: SS

Automatic rinser:

Water Filling Machine, Mineral Water Pet Bottling Machine