Mixing Valves Dealers in Ahmedabad

• Type: 3 Way
• Size: 40MM To 50MM
• Valve Body: IC CFB
• Working Parts: IC CFB
• Seat: PTFE
• Working Pressure: Upto 42 Bar
• Pneumatic Pressure: Upto 3.5 to 7 Bar
• Temperature: Upto 180®C Maximum
• Media: Air / Steam / Water/Gas /Oil /Chemical
• Ends Connection: Welded Flange End 150# To ANSI B 16.5

• Installation orientation: As required
• Hot water inlet temperature: Maximum 90 °C
• Connection sizes: G 3/4"
• Setting range: 30 °C to 60 °C
• Flow rate at 1.0 bar pressure differential across valve: 25 litres / min
• Control accuracy: < ± 4 K

TM 50 thermostatic mixing valves provide control of the water temperature and are used: For centralised control on hot water supply units or for localised control adjacent to point-use outlets. Or for use with solar-heated hot water units with dual energy source. In heating systems with underfloor heating or for limiting boiler return temperatures. Where a system includes a hot water circulation circuit, a KB 191 return flow retarder unit (see accessories) must be fitted to prevent cold water backfeeding and cooling the mixed water at the outlets. Special Features! Highly sensitive thermal element with good all-round water temperature sensing, even at low flow rates! Simple setting of the required water temperature! Scald protection - the hot water inlet is automatically cut off if the cold supply fails provided that the hot water inlet temperature is at least 10 K higher than that of mixedwater setting! The cold water inlet is automatically cut off if the hot supply fails! Inner components are of scale-resistant materials! Complies with KTW requirements Range of ApplicationFlow medium: WaterOperating pressure Maximum: 10 barMaximum pressure difference between hot and cold inlet supplies: 2.5 bar

• Size: 3/4 to 2 Inch
• Material: Brass
• Features: Durability, Finely finished,Rust proof
• Temperature: -10 to +260 deg C

• Media: Air, Water, Oil, Gas, Steam & Chemical
• Size: 1/2″ to 3″ Screwed / Flange
• Body: ASTM A351 Gr. CF8 / CF8M / CF3M
• Steam Packing: PTFE upto 180°C, Self-compensating (Spring Loaded)
• Trim / Spindle: Stainless Steel 304/316/316L
• Seat: Soft Seat (PTFE)
• Gland Packing: Teflon ‘V’ seals, backed by graphite wiper seal (Self Compensating)
• Body Test Pressure: 42 Bar Maximum
• End Connections: Female Screwed to BSP or NPT / Flange / Triclover
• Working Fluid Press: Drop tight / bubble tight, class IV ANSI B 16, 104, 1976
• Leakage: On steam – Continues 155°C, Intermittent 180°C Maximum
• Operating Temp.: (High Temp. above 180°C – On Request)

mixing type ball valve, Ball Valve, Swing Type Check Valve

thermostatic mixing valves, Ball Valves, fire fighting valve

mixing valve, Stainless Steel Y Type Pneumatic Control Valve