Molding Machine Dealers in Cg Road, Ahmedabad

The company that leads the world in the development of all electric injection molding machines, NIIGATA's goal is to develop globally through innovative ideas and advanced technology, and to provide even greater satisfaction to its customers, Accuracy and Productivity is the never-ending subject even today in the plastic industries that are producing high-end products now being used in every field. Niigata Plastic Injection Machinery Division responds to the various customer demands by offering world top class full line-ups in vertical and horizontal "All Electric", ranging from 30 to 1,000 tons that ensure enhanced accuracy and reliability, and also contribute to great energy savings and consecutive environmental preservation.

The mould is as per ASTM-C-156-1980. The mould is made of stainless steel and it is water tight. The mould is rigidly constructed to prevent distoration and it is thoroughly clean. The interior faces of the mould is plane surface. The mould is 150mm X 300mm at the top, 143 x 295 mm at bottom, and 50 mm depth measured on the inside. The mould is flat rim at the top on all sides approximately 6mm in width. A wooden float has a dimension of 75 mm X 280 mm X 20 mm thick is also be provided. The packing rod to be supplied with mould is made of non-absorptant, non-abrasive, non-brittle rubber compound material. The packing rod is 150mm long and have cross sectional dimensions of 25mm X 12 mm with tamping face the form of a blunt torpedo. S.S. Mould 300 x 150 x 50 mm.

• Gross Capacity of Bowl: 4 liters.
• Working capacity: 3 liters.
• Net weight: 22 Kgs.

SSP- Suppositories & Lipstick Unit This equipment permits melting, agitation and mixing during operation. Stainless steel kettle and agitator are thermostatically heated with 1000 watt heating element. Thermostat permits adjustment of temperature of kettle 80-90 degree C. The stand, below the filler nozzle, holds any type of mould. It is adjustable in all directions and controlled by a hand wheel. Production varies with material, moulds, etc. Stirring, mixing and melting are achieved in a single operation and are not interrupted during the filling process.

Hydropneumatic Locking System Pressure Reduction Adjustable Valve Controls The Speed Of The Stretching & Die Operations Maximum Mould Opening 150 Mm Cavity Centre Distance 140mm Platen Size 600 Mm X 460 Mm Tie Bar Thickness 50 Mm Bar Distance Horizontally 310 Mm Bar Distance Vertically 450 Mm Maximum Volume Up To 2 Lit Single Cavity

Kaiser Compression Moulding Press is Designed to make sheet for different type of testing ie. Tensile,Density etc.

The mould is as per ASTM-C-156-1980. The mould is made of stainless steel and it is water tight. The mould is rigidly constructed to prevent distoration and it is thoroughly clean. The interior faces of the mould is plane surface. The mould is 150mm X 300mm at the top, 143 x 295 mm at bottom, and 50 mm depth measured on the inside. The mould is flat rim at the top on all sides approximately 6mm in width. A wooden float has a dimension of 75 mm X 280 mm X 20 mm thick is also be provided. The packing rod to be supplied with mould is made of non-absorptant, non-abrasive, non-brittle rubber compound material. The packing rod is 150mm long and have cross sectional dimensions of 25mm X 12 mm with tamping face the form of a blunt torpedo. S.S. Mould 300 x 150 x 50 mm.

• Features: EUROMAP-67,Just 500 Watts,Upto 4000 Tonne,Multiple Gripper,Easy to Install,Programmable,20 GPIO Pins,Fast ROI and High Speed
• Model Number: GB-MH-IMOLD
• Payload: Upto 8 Kg
• Part Size: 50 to 600 mm
• Cycle Time: 30 Seconds
• Motion Resolution: 0.5 mm
• Working Area: 2000 mm Stroke
• Parts Handling: upto 10 in each pick
• Motion Controller: gridMOVE
• Linear Speed: 300 mm/second
• Power Rating: 500 Watts

• Supply Ability: 2 Unit/Units per Month
• High Speed: Multiple Gripper
• Injection Molding Robot: Plastic Indusry
• Packaging Details: Standard Packaging
• After-sales Service Provided: Overseas third-party support available
• Port: Mumbai
• Easy Installation: Programmable

Automatic Pet Blow Molding Machine, auto blow moulding machine

Chequered Tiles, Beams, b.q. plates

blow molds machinery, Confectionery Machinery

Pvc Moulds, rotomoulding machines, Injection Moulding

compressor moulding press, Hydraulic Presses, corn flakes machine

Moulding Machines, Screen Printing Machines

Rotomolding Rotational Moulding Machine, Cast Aluminum Molds, Roto Mould Die

Pharmaceutical Tablet

Blow Moulding Machines, hydraulic machine tools, borewell drilling equipment

inject moulding machinery

Vacuum pumps

injection moulding machinery, Exporters of plastics extrusion machinery

Glass Reinforced Concrete Moulding, GRC Garden Fountain, Designer GRC Planter