Molding Machine Dealers in Ellisbridge, Ahmedabad

• Features: EUROMAP-67,Just 500 Watts,Upto 4000 Tonne,Multiple Gripper,Easy to Install,Programmable,20 GPIO Pins,Fast ROI and High Speed
• Model Number: GB-MH-IMOLD
• Payload: Upto 8 Kg
• Part Size: 50 to 600 mm
• Cycle Time: 30 Seconds
• Motion Resolution: 0.5 mm
• Working Area: 2000 mm Stroke
• Parts Handling: upto 10 in each pick
• Motion Controller: gridMOVE
• Linear Speed: 300 mm/second
• Power Rating: 500 Watts

• Supply Ability: 2 Unit/Units per Month
• High Speed: Multiple Gripper
• Injection Molding Robot: Plastic Indusry
• Packaging Details: Standard Packaging
• After-sales Service Provided: Overseas third-party support available
• Port: Mumbai
• Easy Installation: Programmable

The mould is as per ASTM-C-156-1980. The mould is made of stainless steel and it is water tight. The mould is rigidly constructed to prevent distoration and it is thoroughly clean. The interior faces of the mould is plane surface. The mould is 150mm X 300mm at the top, 143 x 295 mm at bottom, and 50 mm depth measured on the inside. The mould is flat rim at the top on all sides approximately 6mm in width. A wooden float has a dimension of 75 mm X 280 mm X 20 mm thick is also be provided. The packing rod to be supplied with mould is made of non-absorptant, non-abrasive, non-brittle rubber compound material. The packing rod is 150mm long and have cross sectional dimensions of 25mm X 12 mm with tamping face the form of a blunt torpedo. S.S. Mould 300 x 150 x 50 mm.

The company that leads the world in the development of all electric injection molding machines, NIIGATA's goal is to develop globally through innovative ideas and advanced technology, and to provide even greater satisfaction to its customers, Accuracy and Productivity is the never-ending subject even today in the plastic industries that are producing high-end products now being used in every field. Niigata Plastic Injection Machinery Division responds to the various customer demands by offering world top class full line-ups in vertical and horizontal "All Electric", ranging from 30 to 1,000 tons that ensure enhanced accuracy and reliability, and also contribute to great energy savings and consecutive environmental preservation.

• Gross Capacity of Bowl: 4 liters.
• Working capacity: 3 liters.
• Net weight: 22 Kgs.

SSP- Suppositories & Lipstick Unit This equipment permits melting, agitation and mixing during operation. Stainless steel kettle and agitator are thermostatically heated with 1000 watt heating element. Thermostat permits adjustment of temperature of kettle 80-90 degree C. The stand, below the filler nozzle, holds any type of mould. It is adjustable in all directions and controlled by a hand wheel. Production varies with material, moulds, etc. Stirring, mixing and melting are achieved in a single operation and are not interrupted during the filling process.

Kaiser Compression Moulding Press is Designed to make sheet for different type of testing ie. Tensile,Density etc.

We are offering Jar Blow Moulding Machine to our clients. Our Company is involved in the Manufacturer, Exporter, Trader, and Importer of an extensive range of Blow Moulding Machines. Our range of machines is recognized for features such as quality, durability, efficiency, and functionality. Our machines are known for the easy operability and requirement of minimal maintenance. The machines require minimal power and are extremely safe to use. Blow Moulding Machine in Assam, Kerala, Andhra Pradesh, Tamil Nadu, Karnataka, Manipur, Meghalaya, Mizoram, Nagaland, Sikkim and Tripura, Telangana, Puducherry, Maharastra, Madhya Pradesh and Chhattisgarh. Low Electricity Consumption Easy To Operate 20 Liters Jar Blowing Machine Price 20 Liter Water Jar Making Machine Price 20 Liter Water Bottle Manufacturing Machine Price Pet Bottle Blowing Machine Price In India Bottle Making Machine Price

The mould is as per ASTM-C-156-1980. The mould is made of stainless steel and it is water tight. The mould is rigidly constructed to prevent distoration and it is thoroughly clean. The interior faces of the mould is plane surface. The mould is 150mm X 300mm at the top, 143 x 295 mm at bottom, and 50 mm depth measured on the inside. The mould is flat rim at the top on all sides approximately 6mm in width. A wooden float has a dimension of 75 mm X 280 mm X 20 mm thick is also be provided. The packing rod to be supplied with mould is made of non-absorptant, non-abrasive, non-brittle rubber compound material. The packing rod is 150mm long and have cross sectional dimensions of 25mm X 12 mm with tamping face the form of a blunt torpedo. S.S. Mould 300 x 150 x 50 mm.

Blow Molds, blow molds machinery, plastic injection molds machinery

Automatic Pet Blow Molding Machine, auto blow moulding machine

Pvc Moulds, rotomoulding machines, Injection Moulding

Injection Moulding Machines, rubber moulding machinery

Screen Printing Machines

Blow Moulding Machine, Vacuum pumps

Injection Moulding Machines, Pharmaceutical Formulation

Glass Reinforced Concrete Moulding, GRC Garden Fountain, Designer GRC Planter

Rotomolding Rotational Moulding Machine, Cast Aluminum Molds, Roto Mould Die

Injection Molding Machine

compressor moulding press, Hydraulic Presses, corn flakes machine