Molds Dealers in Ambawadi, Ahmedabad

• Country of Origin: Made in India
• Size: 22x16 inch
• Shape: Rectangular
• Material: Stainless Steel
• Moulding Material: Plastic And PET

• Country of Origin: India
• Type: Soft
• Application: Soap Making
• Color: Available in Many Colors
• Size: Standard
• Material: Silicone

Moulds-Cube Moulds, Beam Moulds, Cylindrical Moulds, Prism Mould (AIM 343, AIM 344, AIM 346, AIM 347, AIM 349 - AIM 354), AIM 376   AIMIL Moulds are made of high quality metal, strong enough to resist distortion & retain their shape and size even under rugged conditions.We offer moulds of different sizes for cube, beam & cylindrical moulding required for compressive strength testing.   Application Moulding Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

Cubes of fresh concrete are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube mould and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, square ness and surface finish requirements. General Description & Specifications Complete with base plate. The faces of the mould are machined flat to +/- 0.02mm accuracy and finished to within +/- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.The base plate is attached to the mould by cleats .The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.SIZES AVAILABLE : 50MM/ 100MM/ 150MM OPTIONAL ACCESSORIES SPANNER FOR DEMOULDING AND MOULDING,TAMPING ROD WITH SAUQRE FACE. CUBE MOULD 7.06 CMS(FOR CEMENT MORTAR) As per IS : 10086-1982, The cube mould is so constructed so as to facilitate separation into two parts. The mass of the mould together with the base plate will be 2.8 +/- 0.2 kg. Material for construction of these moulds is mild steel. BEAM MOULDS For casting concrete specimens for flexural tests. The mould is made of 4 plates assembled together. Each mould with base plate, made of Mild Steel. Faced are machined flat to +/-0.2mm and finished in size to 0.2mm. AS PER IS: 516

Size 1-14″, 1, Colour MAROON, designing wonderful frame mouldings .Designers and manufacturing units work hand-to-hand to bring you enduring frame designs to match today’s popular interior design styles.

The main purpose of the soundness test is to assess the possible risk of late expansion due to hydration of uncombined calcium oxide and/or magnesium oxide. The test uses apparatus known as Le Chatlier apparatus, which magnifies any expansion during heating to a value that can be measured. General Description And Specification The apparatus consist of a small split cylinder of spring brass or other non-corrodible metal of 0.5 mm thickness forming a mould 30 mm internal diameter and 30 mm high. On either side of the split, two indicators are brazed suitably with pointed ends made of 2 mm diameter brass wire in such a way that the distance of these ends to the centre of the cylinder is 165 mm. The split cylinder will be kept between two glass plates. Water Bath For Le-Chatelier Test Water bath capable of containing immersed Le-Chatlier moulds with specimens and of raising their temperature from 27' deg _+ 2'deg C to boiling in 27 +/- 3 minutes.Made of double walled, Outer made of CRC Sheet – powder coated or stainless steel and inside made of stainless steel. Gap between the wall filled by glass wool to avoid heat losses. Temperature is controlled by sensitive thermostat and temp. read on Glass Thermometer or DIGITAL Temp. Indicator cum controller with timer programmed to achieve boiling temp. in prescribed time. The bath is suitable to accommodate six moulds at a time. Complete with stand to hold Le-Chatlier moulds in prescribed method. Complete with three core wire and 15 Amp. Three pin top, At Extra Post Weighing balance accurate up to 0.1gm Measuring cylinder Stop watch Trowel Tray

• Shape: Roud, Square Rectangle

• Shaping Mode: Other
• Brand Name: EIE
• Port: Gujarat, ahmedabad.
• Product: Other
• Product Material: Metal
• Place of Origin: Gujarat, India

The company that leads the world in the development of all electric injection molding machines, NIIGATA's goal is to develop globally through innovative ideas and advanced technology, and to provide even greater satisfaction to its customers, Accuracy and Productivity is the never-ending subject even today in the plastic industries that are producing high-end products now being used in every field. Niigata Plastic Injection Machinery Division responds to the various customer demands by offering world top class full line-ups in vertical and horizontal "All Electric", ranging from 30 to 1,000 tons that ensure enhanced accuracy and reliability, and also contribute to great energy savings and consecutive environmental preservation.

We are offering mould ptfe also famous as ptfe stock shapes. We can provide ptfe mouldsmoulding raning from 10mm id to 1000mm od. We can provide ptfe mouldsmoulding ranging from upto 300mm height.

Rubber Part Moulded, Rubber Fender, pneumatic

Injection Moulds, Dies

cornice moulding, Polyurethane Foam, Wooden picture frames, Marble Pillars

Silicone Rubber Mold, Oil Seeds, Peanut, musturd seed, Indian spices

Blow Molds, blow molds machinery, plastic injection molds machinery

Plastic Mould

glass mould, Die Mould, machine lamp

Attractive GRC Moulding, GRC Garden Fountain, Designer GRC Planter

Pvc Moulds, rotomoulding machines, Injection Moulding

Frame Moulds, Decorative Plastic Mirror Frames