Mortar Dealers in Prahlad Nagar, Ahmedabad

• Color: GREY

Refractory Cement Mortars Refractory brick setting mortars fall into two different groups; air setting and heat setting. As the name suggests the air setting types are supplied in wet form and they set on exposure to the air. Heat setting mortars are supplied in dry form and need to be mixed with water. We manufacture a range of air setting cement mortars to cover the various requirements for the different properties required for high alumina bricks, dense fireclay bricks and lightweight insulation bricks. The Vitcas Range of mortars are alumina based materials and the Silcas Range are silica based materials. Wet mortars are designed for thin joints of 3 � 5mm and it is important to match the strength of the mortar joint with the strength of the bricks. If the joint is weaker than the bricks then cracking will tend to occur at the joints. If the joints are stronger than the bricks then cracking will tend to occur through the bricks themselves.

• Type: Boiler Bed Material
• Material: Alumina
• Color: Yellow
• Structure: Solid
• Resistance Durability: Fire Resistance, Heat Resistance
• Country of Origin: India

refractory bed material of low ferric high temperature super quality is made out of high quality and super heat duty refractory aggregates of high alumina contents & dense texture. this very special bed material has many special characteristics that made it a perfect material for obtaining smooth and perfect fluidization use in fluidized bed combustion boilers (fbc) and circulating fluidized bed combustion boilers (cfbc). crushed refractory bed material for afbc ,cfbc and pfbc boilers

• Packaging Size: 25kg-50kg
• Application: It is used for joining the refractory bricks and bedding work.
• Color: GREY
• Brand Name: Horizon Refractories
• Item Code: REFRACTORY-MORTAR
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,Other
• Mortar Grade: HE-80
• PACKING TYPE: LAMINATED PAPER BAGS PACKED IN WOODEN PALLETS
•  :  

We supply two types of refractory mortars: 1. Ready to use liquid slurry type refractory mortars. No need to add anything; just open it and use it. 2. Refractory mortar in powder form. This can be used by adding water. We offer refractory mortars with various alumina percentages as per clients' requirements.

• Material: Sand, Silica
• Application: Bind Bulding, Making Blocks
• Type: HDPE Bags, LDPE Bags, PP Bags
• Grade: 10/20
• Color: Grey
• Form: Dust
• Hardness: 0-3mohs
• Packaging Size: 0-25kg, 25-50kg

Fire Bricks is one of the acknowledged companies that are engaged in offering high quality and cost-efficient refractory mortars at the most competitive prices. We are backed by a highly efficiently infrastructural unit with the most advanced technology and machinery that aids us in manufacturing the products in stipulated timeframe. Our refractory mortars are renowned for their durability, exceptional performance, and cost maintenance. Our insulating refractory mortars are demanded in the market worldwide for its extensive usage in diverse industries. We are well reckoned as one of the blooming insulating refractory mortars manufacturers and suppliers based in India. Contact us anytime.

Super purity high alumina mortars are being produced at our plant. These mortars possess our brand name DI-90-K and DI-95-H and are manufactured using high purity calcined, reactive alumina powder and green chrome oxide. Salient Features Highest Purity Superior Resistance to Temperature Resist Fluctuations of Temperature Suitable for use in reducing atmospheres

Product Description: "MYMIX - PPR (Plaster)" is a strong durable pre-mixed powder/render with high quality polymer additives suitable for plastering over all types of concrete surfaces (old or new), clay bricks, fly ash bricks and ACC blocks. It is normally applied to masonry interiors and exteriors to achieve a smooth and even surface. "MYMIX - PPR (Plaster)" contains processed and fine graded sand which gives better quality of plaster.   Advantages: Under coating and plastering over existing concrete and brick/block walls Use as a leveling plaster for correction of surface undulation in bare concrete block and other cementitious substrates Basic leveling of concrete, light weight blocks and bricks Filling holes and irregularities, leveling walls and ceilings Create a leveled surface from uneven masonry or concrete wall Least rebound loss in comparison to traditional plastering Minimizes cracking & shrinkage free Saves both manpower & time with better work yield per day Suitable Substrates: Masonry Wall AAC Block wall RCC wall surfaces Enquiry How to Apply: Surface should be cleaned by removing Dirt, soil and roof runoff stains Start at the top and wash the dirt (pre‐wetting of surface) down the wall before applying plaster Proper hacking is to be done prior to application in concrete surface Take 5 to 5.5 litre of water on a bucket and gradually add MYMIX‐ PPR (25 kg) in it. Approx. ration 20 – 22% by weight Mixing can be done manually or by electrical stirrer (for better result) till homogenous mix is obtained. After proper mixing leave the paste for 5 to 10 minutes for polymeric dispersion before application Use mixture within 1 hour of preparation of mix. Hard & set plaster should not be mixed again Correct ratio of water and PPR is essential for better results

Super purity high alumina mortars are being produced at our plant. These mortars possess our brand name DI-90-K and DI-95-H and are manufactured using high purity calcined, reactive alumina powder and green chrome oxide. Salient Features Highest Purity Superior Resistance to Temperature Resist Fluctuations of Temperature Suitable for use in reducing atmospheres

We are one among the trusted Suppliers and Exporters of highly efficient Refractory Mortars that are manufactured using superior quality raw materials. Using advanced machinery in the production assures high performance of these Refractory Mortars, which we offer. The Insulating Refractory Mortars, which we provide, are highly acknowledged for providing protection for a long time wherever they are used for lining. Widely used in various industries, this Insulating Refractory Mortar is in huge demand in the domestic and international market. SpecificationsTypeAI2O3 %Fe2O3 %PCEGrain Size mmSetting Service Temp oCOCoCJR30CM302.503016500 ~ 1.0Heat1350JR40CM402.503016500 ~ 1.0Heat1400JR60CM604.003317450 ~ 0.5Heat1550JR70CM704.003417600 ~ 0.5Heat1600 Note Provided aboce are average test data, subject to reasonable variationsLow Ferric mortars also availableGrading : 95% passing through the maximum indicated grian size Product Data Mortars : JR Set 50 (N) MortarsProduct JR Set 50 (N)*Type 50% Alumina Mortar (Coarse)Nature of BondChemical/Ceramic General Properties Raw Material BaseCalcined Bauxite Max. Service Temperature1550 oCSintering Tempertaure1100 oCMax. Grain Size1.5 mm Chemical Analysis Formula Typical ValueSpecificationAI2O3 %51.9050 Min.SiO2 %32.60 - Fe2O3 %3.604.0 MaxTiO2 %5.80 - CaO0.80 - LOI%5.00 - Physical Properties DetailsTypical ValueSpecificationWater for Trowelling Consistency %24 ~ 28 - Water Required for ramming consistency %10 ~ 20 - Transcerse strength After drying at 110 oC for 24 hours (kg/cm2)17 - % Retained above maximum size25.0 max Thermal Properties DetailTypical ValueSpecificationPyrometric cone equlvalent (Orton/oC)32/171731.5/1699