Motor Drives Dealers in Ahmedabad Cantonment, Ahmedabad

• Phase: Three Phase
• Frequency: 50Hz
• Brand: Schneider
• Model Name/Number: ATV310H037N4E
• Power: 0.37kW
• Communication port protocol: Modbus
• Connector type: RJ45 (on front face) for Modbus
• Physical interface: 2-wire RS 485 for Modbus
• Transmission rate: 4800 bit/s 9600 bit/s 19200 bit/s 38400 bit/s
• Number of addresses: 1…247 for Modbus
• Communication service: Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43)
• Line current: 1.8 A
• Apparent power: 1.4 kVA
• Prospective line Isc: 5 kA
• Continuous output current: 1.5 A at 4 kHz
• Maximum transient current: 2.3 A for 60 s
• Power dissipation in W: 19.63 W at In
• Speed drive output frequency: 0.5…400 Hz
• Nominal switching frequency: 4 kHz
• Switching frequency: 2...12 kHz adjustable
• Speed range: 1…20
• Transient overtorque: 170…200 % of nominal motor torque depending on drive rating and type of motor
• Braking torque: Up to 150 % of nominal motor torque with braking resistor at high inertia Up to 70 % of nominal motor torque without braking resistor
• Asynchronous motor control profile: Sensorless flux vector control Sensorless flux vector control Quadratic voltage/frequency ratio
• Motor slip compensation: Preset in factory Preset in factory
• Output voltage: 380...460 V three phase
• Electrical connection: Terminal, clamping capacity: 1.5...2

Variable speed AC drive (Inverter drive) cutter heater + digital temperature control. Individual ink circulation system with each colour Auto start/stop of corona with line.

• Input Voltage: 220V
• Brand: Fuji Electric
• Input Phase: Three Phase
• Input Frequency: 50HZ
• Overload Capacity: 200%-0.5s,150%-1min
• Enclosure Rating: IP 30
• Braking Chopper: Built In
• Standards: CE,UL
• Braking transistor: Yes
• Ambient temperature: 50 degree Celsius

1. 15 to 36VDC Supply Voltage  2. H-Bridge, 2 Phase Bi-polar Micro-step motor driver  3. Suitable for 2-phase, 4, 6 and 8 leads step motors, with Nema size 16 to 23  4. Output current selectable from 0.21 ~ 1.5A peak  5. Compact credit card size package  6. Optically isolated single ended TTL inputs for Pulse, Direction and Enable signal inputs  7. Selectable resolutions up to 12800 steps  8. Over Voltage, Coil to Coil and Coil to Ground short circuit protection.

• Brand Name: ABB
• Model Number: ABB Drive
• Input Phase: 3 - Phase
• Warranty: 1 year
• Input Frequency: 50/60 Hz
• Ambient Temp.: -10 to +50 DegreeC (14 to 122 DegreeF), with derating up to 60 DegreeC
• Degree of Protection: IP20 As standard

Specifications 220V Class: 0.5~3HP, suitable for motor capacity: 0.4~2.2kW440V Class: 1~215HP, suitable for motor capacity: 0.75~160kW Feature Wide Power range from 0.4 to 160kW Built-in Advanced Flux Vector Control, Speed Control Range: 1:100 (0.5-50Hz) Output Frequency from 0.01 to 400Hz Option Card Function is available for Customized Models Ultra Low Noise Operation with Built-in SOFT-PWM Higher Reliability and Environment Immunity with PCB Protection Coating Built-in RS485 Communication Global Field Network Options such as: -ProfiBus DP, DeviceNetTM 5 digit 7 Segment Removable keypad with standard RJ45 interface Copy Unit option, is available for Parameter Copy PID Control Function is Built-in

thyristor drive, electronics panel board, Control Panel Boards

Ac Drives, Control System, instrumentation product

Ac Drives, Gearboxes

Ac Motor Drives, lightning protectors, Electric Leaf Blower, Signal towers

Ac Drives, DC Drives, Electric Panel, Programmable Logic Control Panel

Ac Drives, Power Transmission Equipments, Gear Boxes, amd geared motors