Motor Drives Dealers in Ctm, Ahmedabad

• Product Range: Three Phase 415V - 5.5 to 450kW
• Enclosures: IP20 till 11Kw & IP00 till 450Kw
• Dual rating operations: Designed to be used for heavy and normal duty applications
• Starting Torque: 200% at 0.5Hz for Sensorless Control
• Built-in DC Reactor: From 22kW to 280kW
• Handle loads up to: 450 kW

Features: V/F, Sensorless Vector Control, Slip Compensation Starting Torque: 200% at 0.5Hz for Sensorless Control. Conformal Coating complying to IEC 60721-3-3 class 3C2. Built-in RS485 Modbus. Built-in Booster pump control. Dual PID. Pre-heat Function. Reverse Rotation Prevention. Component Life Monitoring. Built-in DC Reactor from 22kW to 280kW.   Overload capacity : Heavy duty operation: 150% of rated current for 60 sec. Normal duty operation: 110% of rated current for 60 sec   Booster Pump: : It is used when a single drive is used to control multiple motors in pump systems, by default 4 Pumps can be controlled & Max upto 8 pumps can be controlled. Precise Control of pressure. Ideal cost effective solution for constant pressure / constant flow pumping application.   PID & Dual PID : In the centrifugal fan and pump, PID control is provided as a standard function in order to maintain a constant pressure, flow or level. Where external or cascaded PID control is required, the built-in dual PID algorithm of the Ex2000 can be utilised to satisfy various system requirements.   Sleep & Wake Function : It automatically switches OFF Drive during user-programmed low- load conditions and then to start-up again when process demand increases. It helps eliminate unnecessary operation at idle speeds, thus saving wear and tear, as well as energy. PID Control   KEB : During power dips or momentary power outage, the drive’s output can be maintained by utilising the residual mechanical energy in the load as a regenerative source. The duration of the power-dip ride-through depends on the load characteristics.   Pre Heat Function : It allows the drive to maintain residual heat in the motor, which helps eliminate condensation in damp conditions when the motor is not in use. In the drive, an adjustable, low-level DC current is applied to the stator windings either continuously or on a duty cycle basis.   Automatic Energy Saving : Load change may incur energy losses. But the optimised flux control of the Ex2000 results in more outstanding energy-saving.   Removable Terminal Block : In case of AC Drive failure, control card of the existing drive can be replaced to new drive with wiring. Reduces the downtime of AC Drive replacement

• Brand: Fuji
• Output Current: 8.6-  32 A
• Input Phase: Single Phase
• Display Type: Digital
• Motor RPM: 2880 RPM
• Motor Power: 0.4- 132 KW

• Power: 2 HP
• Frequency: 47-63Hz
• Usage: for Pumps
• Voltage: 200v-240 V
• Adjustable Speed Ratio: 0-1500
• Body Material: ABS
• Operating Temperature: 45 Degree celsius
• Storage Temperature: 50 Degree celsius

• Brand Name: Delta
• Condition: New
• Input Phase: One Phase & Three Phase
• Type of Product: AC Drive
• Power Rating: 22 KW
• Series: VFD- C2000
• Motor Power (kW): 74.57 kW
• Motor Rating: 30 HP
• Power Supply Voltage: 415V
• Motor RPM: 1400 RPM

Variable voltage DC Drive uses Thyristors in its power section to vary the armature voltage of a separately excited D.C. Motor to run it at a desired speed. Controls the system in variations of load temperature or supply voltage. The drive operates on 230V Ac, 50 Hz single Phase Supply. Normal Protections like overload current trip. Surge current trip, field current failure trip as well as surge suppressors are provided.

Industrial Ac Drives, PLC Automation Control Panel, HMI Touch Panel

We are offering variable frequency drive. Specifications : rated voltage: 440v/three phase power range: 0.4kw-3.7 kw output frequency: 0-900hz features : automatic setting for acceleration/decelerating time control model v/f overload capacity: 60 with 150% of rated current, 105 with 180% of rated current automatic voltage regulation (avr) all -dimensional protection includes pid circuit control senseless vector control program and vector control of fan and water pump makes it more economical.

• Brand Name: Delta
• Frequency: 50/60 Hz
• Phase: 1/3 Phase
• Output Current: 5.0 A
• Input Current: 6.0 A
• Voltage: 230 V
• Power Consumption: 1.5 kW/2.2 kW
• Air Temperature: -10
• Relative Humidity: Less than 90%, no condensation allowed
• Atmosphere Pressure: 86
• Installation Site Altitude: Less than 1000 m
• Working Temperature: -20 Degree C
• Features: Simple mounting, Shock resistance, Unmatched quality

DANFOSS (DENMARK) was the first company to mass-produce Frequency Converters way back in 1968. It is a more than 3 Billion USD group company covering operations in over 110 countries across 4 continents. In India; DANFOSS products are exclusively sold and supported by DANFOSS INDUSTRIES PVT. LTD. – A wholly subsidiary of DANFOSS (DENMARK).

• Features: Less power consumption, Easy operation, Compact design
• Application: electrical industry

• Brand Name: Emco
• Model Name/Number: Permanent magnet dc drive
• Motor Power: 0.25 hp to 10 hp
• Input Voltage: 230 volt and 415 volt
• Input Phase: 1 - Phase
• Input Frequency: 50 hz
• Output Current: As per mention drive
• Warranty: 1 year
• Country of Origin: Made in India

• Brand Name: Schneider
• Input Phase: Three Phase
• Output Type: Single
• Cooling Method: Fan
• Display: Digital
• IP Rating: IP65
• Automation Grade: Automatic

• Brand Name: Siemens
• Display: Digital
• Output Type: Triple
• Input Phase: Three Phase
• Phase: Three Phase
• Motor Power (kW): 1 HP To 250 HP
• Automation Grade: Automatic
• Output Phase: Three Phase
• Voltage: 440 V
• Warranty: 1 Year
• Condition: New
• Supply Frequency: 50/60 Hz
• Efficiency Factor: 98 %

► Fully digital, vector-controlled drive amplifier ► Auto tuning function ► Digital, analogue, EnDat 2.2 and Resolver encoder interfaces ► Position control, speed control and torque control

• Power: 15 kW
• Country of Origin: Made in India
• Brand: Trisons Drives
• IP Rating: IP40
• Usage/Application: Industrial
• Frequency: 50 Hz
• Input Speed: 1500 RPM
• Material: Cast Iron
• Phase: Single Phase

Product Range Power : 0.5 to 5 hp Frequency : 48…63 Hz Voltage : 1Ø 200 to 240 V ± 10% 3 Ø 380 to 480 V ± 10 Programmable Control Connection: 5 DI / 1 AI / 1 Relay O/P Features 40° C ( Upto 50° with Derating ) Application: Fans Pumps Gate control Material handling Conveyors Ambient Temperature: Flash Drop Integrated interface Integrated potentiometer Inbuilt EMC filter Inbuilt brake chopper Flexible installation Coated boards

AD200 Series High Performance Open Loop Vector Control inverter. Applying the most advanced sensorless vector control which keeps pace with the leading international level and 32-bit DSP system. The product enhances its reliability to meet the requirements of environment adaptability, customized and industrialized design withmore optimized functions, more flexible applications and more stable performance. Modular design of Fans and Capacitor for easy replacement and maintenance. External LED keypad to copy parameters; Optional LCD keypad provided. Emergency Power Supply (EPS) Function with Just a 220VAC Single Phase UPS. Double Safety protection examine, output phase loss at all time and check torque output before releasing the mechanical brake. Auto tune motor parameter without load disconnection. 4 KW, 5.5KW and 7.5KW Power Rating. 440VAC Three Phase Power Supply. 220VAC Single Phase for Emergency Power Supply. Open loop vector inverters for controlling asynchronous AC induction motors and permanent magnet synchronous motors. Up to 0.25Hz/150% starting torque(Asynchronous motor); 2.5Hz/150% starting torque (Synchronous motor)

We have emerged as prominent manufacturer, exporter and supplier of Eddy Current Drive. Owing to their precise design and high efficiency, these products are used for maintaining constant torque application for variable load. Our offered products have robust design and high power capacity due to use of quality raw materials with the use of advanced machines. We design our products as per latest industrial norms for fulfilling varied needs of our clients.Applications: Paper Plant. Cable Plant. Textile Machines. Corrugated Plant.  

• Power: 3 HP
• Application: For Fans
• Phase: Three phase
• Brand Name: Delta
• Power Range: 380V-480V
• Input Phase: 3  Phase