Mud Pump Dealers in Rakhial, Ahmedabad

• Head: 35 Mtr
• Pressure: 3.5 kg/cm2
• Capacity: 75 m3/hour
• Pump MOC: CI, SS304, SS316, SS316-L.M.S
• Sealing: Gland Fitted/Sealing Fitted
• Discharge Size: 32 MM TO 80 MM

Salient Features Quick automatic self-priming action, designed for automatic air release duringpriming. Non clogging impeller to handle suspended solids. Repairs possible without disturbing the pipe connections due to back pull out design. No need for foot valve.

  Application KMD pumps are used when one or more of the following are required: Self priming Solid / Polluted handling Resistance to abrasion. KMD pumps can handle liquids up to a Viscosity of about 50 mm2/s (cst)They can be used for waste treatment, transfer of clean or dirty liquids, Pumping out settled sludge, dosing neutralizing liquids, filtration, pumping out settled sludge, pumping polluted corrosive waste water containing sand, mud or solids in suspension, effluent treatment plant, acid of alkali liquids, clean or dirty low viscosity petroleum products, solvents, milk or lime suspicion soda, washing, cooling, smoke scrubbing, de-watering construction sites, food waste, water filtration, loading or unloading sanitary duty, cleaning bilges, liquid manure oxygenation, etc. Features Simple construction having back-pullout design. Easy inspection of impeller. Quick self priming action without foot valve up to 7.5m. Pumping large size diameter solid in suspension. Available in mono block & bare shaft design for v-belt / couple set version. Various options for material of construction. Option for separate volute design and replaceable ware plate gland plate for quick, low cost & easy maintenance. Standard model having SS 410 sleeve, wear plate screw, impeller nut, C40 shaft, rest in FG200 C.I.

Special Features Excellent quick automatic action without foot valve up to 8 mtrs. Auto suction lift upto 18 feet. Automatic air release during priming. Back pull out design, so easy maintainance without disturbing pipe lines. Dynamically balanced rotating parts ensure less vibrations. Better efficiency because of good hydraulic design. Minimum parts, fast repairing at low cost, Also pump is available at economical rate. Available in Bare, Coupled, Monobloc, Belt driven version. Also offered pump with trolley / trailer to move it from one place to another. Less expensive & easily available spares. Available in gland & mechanical seal as per customer's requirements. simple construction, only two moving parts. Easy inspection of impeller. Large diameter of solids handled . up to 50 mm. High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available in s.s. Alloy 20, Polypropeline etc Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance. Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance. Application Public utilities :- For pumping muddy water, sewage, polluted liquids, solid and in swimming pool. Dewatering Basements, Trenches, Construction sites. Onboard shift, as bildge, for desk wash & engine cooling. Tiles & Marble factories, effluent plants. Mobile Machinery : Cooling water for marine engines and shovels. Any application where priming is to be avoided. Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty. Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids. Naval duty :- Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation. Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge. Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings. Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing. Typical Application Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation Water circulation in paint spray booths; stripping fuel tanks circulation Recovery of dirty solvents Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline) Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board Marine duty; brine, sea intake and circulation of sea water in swimming pools Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash At Drilling Rigs Note : Special Pumps for Higher Capacity and Head available on request. Material Of Construction CASING : CAST IRON / SS-304 (CF-8) SS-316 (CF-8M) IMPELLER : CAST IRON / CF-8 / CF-8M / BRONZE DIFFUSER : CAST IRON / CF-8 CF-8M /BRONZE S SHAFT : EN-8 / SS-304 / SS -316 SLEEVE : SS-410 / SS-304 / SS-316 / BRONZE BEARING HOUSING : CAST IRON SEALING : TIWA /CARBON - CERAMIC SEAL / TC-TC SEAL

• Type: Self Priming Mud Pump (with Mech. Seal fitted)
• Capacity: up to 75 m/hr
• Head: up to 35 mtr
• Pressure: up to 5 kg/cm2
• Speed: up to 2900 rpm
• Temperature: up to 100° C
• Suction Head: up to 7.5 mtr
• Size: 32 mm to 75 mm
• Solid Hand Size: up to 25 mm
• Viscisiy: up to 100mm/Sec.
• M.O.C.: CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C,CD4MCU, etc

We are offering monoblock mud pump. 1 h.p,single phase ,three phase,40 x 40 mm size ,2880 r.p.m,self priming monoblock pump.

Backed by the team of professionals we are able to offer you a quality centrifugal mud pump. These centrifugal mud pump are manufactured by considering IS: 8034 standards and BIS standards. Centrifugal mud pump are also known as sand pumps or mud pumps. Having the great design these pumps are convenient for purpose of engine driving pump. Our centrifugal mud pump are mainly known for its sturdy construction. More over for its error free and noise less working they are highly demanded in the market both domestic and international.     Features: Long life service Noiseless operation Less maintenance needed No foot valve required No priming of suction pipeline Suitable for motor Non-clogging impeller Applications: Dewatering mud Industrial pumping of petroleum products Industries Municipalities Public health department

• Material: CI
• Model: JSMP SERIES
• Motor: 2 HP
• Head: UPTO 10 METER
• Brand: JIKSAN
• Max Flow Rate: UPTO 1200 LPM
• Phase: 3 Phase

• Material: CI
• Country of Origin: Made in India
• Head: 32 m
• Max Flow Rate: 19 m3/h
• Brand: Lubi
• Rating: 1.5 kW & 3.7 kW
• Rated Speed: 2900 RPM

• Material: Mild Steel
• Color: Blue
• Power: AC
• Automation Grade: Manual
• Pump Type: Centrifugal Pump
• Motor: 5HP
• Phase: 1/3
• Power Source: Electric
• Voltage: 230/415
• Speed: 2800
• Warranty: 1YEAR
• Frequency: 50HZ
• I Deal In: New Only

• Material: USHA
• Brand: USHA
• Usage/Application: DIRTY WATER LIFTING
• Head: 7-15 m
• Size: 1",2"
• Phase Type: "SINGLE OR THREE PHASE
• Motor Type: SUBMERSIBLE

Open well Submersible Pump, Domestic Water Pumps, Monoblock centrifugal pump

Mud Pumps, Boiler Tube, Hydraulic & Boiler Tubes, Heat Exchanger Tubes

Mud Pumps