Mud Pump Dealers in Ahmedabad

• Brand Name: EXCEL
• Material: Cast Iron
• Driven Type: Electric
• Condition: New
• Power: 1 HP To 60 HP
• Pressure: Maximum : 4.5 Kg/Cm2
• Structure: Horizontal
• Fuel: N.A.
• Country of Origin: India
• Usage: Water,Muddy Water Handling, Effluent Pumping,Transfer or High Head Delivery
• Type Of End Use: Industrial
• Motor Phase: Three Phase
• Differential Head:: 26 Mtr
• Maximum Flow:: 147 M3/Hr
• Maximum Solid Allowed:: 22 mm
• Suction Lift Capacity:: 8 Mtr

sewage and effluent treatment plants. Low npsh process circulation duty. Aboard ships as bilge, deck wash pump & engine cooling pump. Loading , unloading and transfer of tricky liquids viz. Oils , solvents , gas oils , minerals , oils , grease, petrol, seawater etc.   range • capacity :- up to 350 m3/hr, • head :- up to 60m • suction head: – up to 8 meters. • material :- cast iron & bronze, • solids: – up to 41 mm dia. • viscocity: – up to 100mm²/sec.   features • perfect sealing assured by high quality mechanical seal which cannot run dry because of internal oil reservoir. • graded casting & ss shaft, increase service life. • bearings greased for life, save external lubrication. Minimum need for inspection and maintenance. • drive options,of lectric motor, coupled or monoblock and belt drive versions or by petrol/diesel engine.   design • perfect selfpriming action with maximum suction head of 8 meters. • impellers with wider flow passage avoid clogging and can handle solids up to 41 mm dia. • back pullout design , simplifies inspection and maintenance. • compact , light weight & yet rugged construction.

We are one of the leading Manufacturers, Exporters and Suppliers of Self Priming Mud Pump from Gujarat (India). We have a dedicated team, which ensures the Self Priming Mud Pumps are fabricated using cutting-edge technology and the best quality parts. Owing to remarkable performance, fuel efficiency and longer service life, our Self Priming Mud Pumps are widely used in construction sites, swimming pools, sewage plants, etc. Look for us, to get the Self Priming Mud Pumps at cost-effective prices.Specifications : Series : SSPP Series Type : Self Priming Mud Pump (with Mech. Seal fitted) Operating Range : Capacity : up to 75 m3/hr Head : up to 45 mtr Pressure : up to 5 kg/cm2 Size : 32 mm to 75 mm Solid Hand Size : up to 25 mm Speed : up to 2900 rpm Temp : up to 100 C M.O.C. : CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C,CD4MCU, etc. Applications :  Effluent treatment, Sewage Plants, Dyes and Intermediate Industries De-watering Docks, Ports, Vessels, Swamps, Basements, Trenches, Construction Sites, Swimming Pools etc. Pumping petroleum Products like L.D.O., Diesel, Petrol, Kerosene, etc. Transfer of Chemicals, Solvents, Effluent, Hot Water, Chilled Water, Condensate etc.

• Material: Steel
• Color: Blue
• Brand: SMS
• Motor Horsepower: 3-26 Hp
• Pump Type: Centrifugal Pump

• Brand Name: HIGH HEAD MUD PUMPS

We are offering high head mud pumps owing to our in-depth knowledge and vast experience in this domain, we have been able to offer premium quality self priming mud pumps. These pumps are manufactured using excellent quality components and latest technology by our skilled professionals. In order to ensure quality, these pumps are stringently tested on various parameters by our experts. Moreover, optimum performance and functionality are some of the factors that increase the demand of our offered range in the market. Reliable engineers are expertise in manufacturing of mud pumps, design of pump is sturdy and parts are with long life, manufacturers & exporters self priming mud pumps. Special features: maintenance is easy because of back pull out design excellent quick automatic priming action without foot valve up to 8 mtrs. impeller and rotor are dynamically balanced for less vibrations best efficiency because of good hydraulic design easy to install, very simple construction , solid handling up to 60 mm long life of pump because wearing parts can easily changed pumps are available in bare , coupled , mono block, engine driven, belt driven version self priming- centrifugal pumps: material of construction: pumps are also available with trolley to move from one place to another. Self priming- centrifugal pumps:- material of construction. Specifications: - standard options casing cast iron fg 260 ss -304316gunmetal impeller cast iron fg 26 ss -304316gunmetal shaft en-8 ss -410304316 sleeve ss -410 ss -304316 gland tiwa mechanical seal, - - teflon gland, gland. application: for pumping muddy water, sewage, polluted liquids, solids and in swimming pools industry for clean dirty water, acid or alkali liquids containing sand, mud or solids in suspensions, clean or dirty low viscosity petroleum products, milk , lime caustic soda etc. waste treatment - pumping polluted, hot or corrosive wast

• Material: CI
• Model: JSMP SERIES
• Motor: 2 HP
• Head: UPTO 10 METER
• Brand: JIKSAN
• Max Flow Rate: UPTO 1200 LPM
• Phase: 3 Phase

• Type: Mud Pump
• Material: Degchun Metal, Stainless Steel
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Color: Brown, Grey, LIght White, White
• Condition: New, Used
• Power: 10-12kw, 2-4kw, 4-6kw, 6-8kw, 8-10kw
• Driven Type: Electric, Hydraulic, Manual
• Pressure: 100-500Bar, 1000-1500Bar, 500-1000Bar
• Structure: Industrial Pump, Piston Pump
• Pressure Type: High Pressure, Low Pressure, Medium Pressure
• Automation Grade: Fully Automatic, Manual, Semi Automatic

Backed by the team of professionals we are able to offer you a quality centrifugal mud pump. These centrifugal mud pump are manufactured by considering IS: 8034 standards and BIS standards. Centrifugal mud pump are also known as sand pumps or mud pumps. Having the great design these pumps are convenient for purpose of engine driving pump. Our centrifugal mud pump are mainly known for its sturdy construction. More over for its error free and noise less working they are highly demanded in the market both domestic and international.     Features: Long life service Noiseless operation Less maintenance needed No foot valve required No priming of suction pipeline Suitable for motor Non-clogging impeller Applications: Dewatering mud Industrial pumping of petroleum products Industries Municipalities Public health department

• Type of Installation: Stationary
• Maximum Flow Rate: 266 m³/h
• Minimum Flow Rate: 17 m³/h
• Maximum Head: 34 m
• Minimum Head: 6 m
• Speed of Rotation: 3500/ 2900 / 1400 / 950 Revolutions/min
• Maximum Discharge-side Pressure: 3 Bar
• Type of Bearing: Ball Bearings
• Drive Frequency: 50 Hz / 60 Hz
• Type of Drive: Electric Motor
• Type of Lubrication: Grease Lubrication
• Max. Permissible Fluid Temperature: 140 °C
• Nozzle Position: End Suction
• Suction Characteristics: Self Priming
• Impeller Material: SS 316 / High chrome / SS 304 / SS 410/ Graded CI / Ni Hard
• Type of Impeller: Semi Open
• Shaft Material: EN-9 / SS 304 / SS 410 / SS 316

• Weight: 20-40kg, 40-80kg, 260
• Finishing: Polished
• Packaging Type: Wooden Box
• Usage: Water, Industrial, Dirty Water Pumping
• Specialities: Ruggedly Constructed, Durable, Easy To Use
• Engine Horse Power: 32
• Pump Size: 150x150
• Brand Name: EXCEL
• Material: Cast Iron
• Condition: New
• Driven Type: Electric
• Warranty: 1 Year
• Country of Origin: India
• Motor Phase: Three Phase
• Type Of End Use: Industrial
• Capacity: 640 M3/Hr.(Max.): Head: 46 Mtrs (Max.)

• Brand Name: Omicron
• Material: Mild Steel
• Color: Blue
• Voltage (V): 220V
• Frequency: 50-60Hz
• Warranty: 1 Year

We source the raw material from the leading vendors and manufacturers in the market; thus, we are capable of fulfilling the exact requirements of the clients with our offered products. With the great support of our in-house storage facility, we are capable to undertake bulk and urgent requirements of the customers. This facility helps us in keeping the stock away from dust, moisture, rain and others damaging factors.

The "VIRAJ" make "VSPM" series is designed in Non-clog Horizontal Self Priming Mud Pumps of mono block and only pump construction. Self Priming Mud Pumps are also provided with semi-open type impeller to cater to the special requirements of the customers. Our Self Priming Mud Pumps have longer life because of the replaceable wearing parts. The Self Priming Mud Pumps offer quick self-priming actions and also no foot valve is required for priming. Furthermore, our Self Priming Mud Pumps need lesser maintenance and their spare parts are also easily available. Design Features : Quick automatic self priming action. Automatic air release during primingNon-clogging impeller to handle suspended solidsSuitable for motor & engineDynamically balance rotation parts ensure avoid minimum vibrationsNo need to foot valvePortable when fitted with trolleyHigher Efficiency Advantages of "MS/MV" : Available in both 2900 RPM & 1440 rpm ( 3.0 hp & 5.0 hp)Available with fully S.S. constructionZero Routine maintenanceEnables maintenance at siteTolerates wide electrical supply fluctuationsCompact and light weightRobust constructionShaft supported on two ball bearings Application Area : Construction Site Textiles , Ceramic and Chemical IndustriesPetroleum Industries Dewatering application for any industriesHotel / Airport/ Railways ETP Plant , Waste water applicationMarine IndustriesMunicipal Corporation/Nagar Palica sewage pumpingSteel IndustryPower PlantCoal /PortTunnelsTrenches and Pits Accessories : CouplingBase FrameFlangeMotorVirbating PadTrolly

• Pressure: 3.5 Kg/cm2
• Brand Name: Chemshire
• Driven Type: Electric
• Condition: New
• Capacity: 75 M3/hour
• Head: 35 Mtr
• Pump MOC: CI, SS304, SS316, SS316, Alloy 20, etc.
• Sealing: Gland Fitted/Sealing Fitted
• Discharge Size: 32 MM TO 80 MM

Salient Features Quick automatic self-priming action, designed for automatic air release duringpriming. Non clogging impeller to handle suspended solids. Repairs possible without disturbing the pipe connections due to back pull out design. No need for foot valve.

• Pressure: High Pressure
• Application: muddy water
• Application: Sewage
• Structure: Single-stage Pump
• Fuel: Other
• Theory: Centrifugal Pump
• Standard or Nonstandard: Standard
• Port: FOB NHAVA SHEVA
• Supply Ability: 100 Piece/Pieces per Month
• Model Number: AMTM Series
• Lead Time: 30 DAYS

• Brand Name: Operating Range Capacity : Up to 640 M3/hr Head : Up to 55 mtr Discharge Size : 40 mm to 200 mm Temp,Radial Pumps
• Driven Type: Electric
• Pressure: Up to 5 Kg/cm2
• Usage: Industrial
• Type Of End Use: Industrial
• Certification: ISO 9001:2008 Certified, CE Certified
• Packaging Type: Wooden Box
• Warranty: 1 Year
• Country of Origin: India
• Head: Up To 55 Mtr
• Max Flow Rate: Up to 640 M3/hr
• Motor Speed: Up to 3500 rpm
• Motor Phase: Three Phase
• Head: Up to 55 mtr
• Pressure: Up to 5 Kg/cm2
• Model: RMP Series
• Capacity: Up to 640 M3/hr
• Discharge Size: 40 mm to 200 mm
• Temperature: Up to 110°C
• Speed: Up to 3500 rpm

• Material: CI
• Country of Origin: Made in India
• Head: 32 m
• Max Flow Rate: 19 m3/h
• Brand: Lubi
• Rating: 1.5 kW & 3.7 kW
• Rated Speed: 2900 RPM

SELF PRIMING, HIGH SUCTION LIFT., CUSTOM MADE DIRECTION OF ROTATION.SUCTION AND DELIVERY HAVING BSP THEADED CONNETION,& FLANGE CONNECTION CAN BE GIVEN REQUIRED. HIGH PRESSUREHIGH CAPACITYHIGH TEMPERETURE PUMP CAN BE MANUFACTURED AS PER REQUIREMENT. PUMP CAN BE PROVIDED WITH MOTOR, GEAR BOX. BASE PLATE, COUPLING GUARD FLANGS ETS. AS REQUIRED. LOW COST IN MAINTENANICE ROBUST CONSTRUCTION DESIGNED FOR LONG OPERATIONAL PERIOD BITWEEN

• Material: Cast Iron
• Power: 3 HP
• Automation Grade: Automatic
• Phase: Single Pahse
• Voltage: 240V
• Brand: Lubi
• Head Range: Up to 24 m/2.4 kg/cm 2
• Flow Range: Up to 870 LPM / 52.2 m 3 /h

Applications Effluent and Sewage Treatment Plant Petroleum Product Handling Incinerator Agriculture Purpose De-watering Purpose Swimming Pools Loading and Transfer Of Oil Re-rolling Mills Pits Rain and Storm Water

• Material: USHA
• Brand: USHA
• Usage/Application: DIRTY WATER LIFTING
• Head: 7-15 m
• Size: 1",2"
• Phase Type: "SINGLE OR THREE PHASE
• Motor Type: SUBMERSIBLE

We are offering monoblock mud pump. 1 h.p,single phase ,three phase,40 x 40 mm size ,2880 r.p.m,self priming monoblock pump.

• Type: Mud Pump
• Material: Stainless Steel
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Color: Brown, Grey, LIght White, White
• Condition: New, Used
• Power: 10-12kw, 2-4kw, 4-6kw, 6-8kw, 8-10kw
• Driven Type: Electric, Hydraulic, Manual
• Pressure: 100-500Bar, 1000-1500Bar, 500-1000Bar
• Pressure Type: High Pressure, Low Pressure, Medium Pressure
• Automation Grade: Fully Automatic, Manual, Semi Automatic

Special Features Excellent quick automatic action without foot valve up to 8 mtrs. Auto suction lift upto 18 feet. Automatic air release during priming. Back pull out design, so easy maintainance without disturbing pipe lines. Dynamically balanced rotating parts ensure less vibrations. Better efficiency because of good hydraulic design. Minimum parts, fast repairing at low cost, Also pump is available at economical rate. Available in Bare, Coupled, Monobloc, Belt driven version. Also offered pump with trolley / trailer to move it from one place to another. Less expensive & easily available spares. Available in gland & mechanical seal as per customer's requirements. simple construction, only two moving parts. Easy inspection of impeller. Large diameter of solids handled . up to 50 mm. High resistance. to abrasive liquids the wear plate is easily replaced and impeller are also available in s.s. Alloy 20, Polypropeline etc Easy to install :- only the suction hose is immersed in the liquid, The pump can be set up high and dry in the most convenient position for inspection and maintenance. Long Life :- The parts subject to wear can be easily replaced one or more times to restore the original performance. Application Public utilities :- For pumping muddy water, sewage, polluted liquids, solid and in swimming pool. Dewatering Basements, Trenches, Construction sites. Onboard shift, as bildge, for desk wash & engine cooling. Tiles & Marble factories, effluent plants. Mobile Machinery : Cooling water for marine engines and shovels. Any application where priming is to be avoided. Industry : Transfer of clean or dirty neutral, acid or alkali liquids containing sand, mud or solids in suspension; clean or dirty low viscosity petroleum product or solvents; milk of lime, caustic soda; washing, cooling, circulation; smoke scrubbing; emergency duty. Civil engineering : Flood drainage; sewage pumping; fire fighting; recovery of dangerous liquids. Naval duty :- Loading and unloading; bilge pumping; washing, fire fighting, stripping, sanitary duty and circulation. Waste treatment : Pumping polluted, hot or corrosive waster water containing sand, mud or solids in suspension; dosing neutralising liquids; pumping out settled sludge. Construction industry : Dewatering excavation, canals or ponds; ground water dewatering with wellpoint system or drains; water supply from wells or canals; hosing down concrete castings. Agriculture : Surface irrigation; liquid manure oxygenation; transfer and spraying liquid manure or fertilisers, distribution of liquid animal feed; transfer of must; washing. Typical Application Liquid containing sand mud or solids in suspension with pH from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralising liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circilation Water circulation in paint spray booths; stripping fuel tanks circulation Recovery of dirty solvents Transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline) Liquid fertiliser transfer, circulation and spraying, brackish or sea water containing sand Brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board Marine duty; brine, sea intake and circulation of sea water in swimming pools Pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products Recovery of spills from chemical plant; transfer or circulation of caustic soda or potash At Drilling Rigs Note : Special Pumps for Higher Capacity and Head available on request. Material Of Construction CASING : CAST IRON / SS-304 (CF-8) SS-316 (CF-8M) IMPELLER : CAST IRON / CF-8 / CF-8M / BRONZE DIFFUSER : CAST IRON / CF-8 CF-8M /BRONZE S SHAFT : EN-8 / SS-304 / SS -316 SLEEVE : SS-410 / SS-304 / SS-316 / BRONZE BEARING HOUSING : CAST IRON SEALING : TIWA /CARBON - CERAMIC SEAL / TC-TC SEAL