Multipack - MMC Vatva, Ahmedabad, Gujarat

The vial sticker labeling machine is completely automatic and can be operated at extremely high speeds. Moreover this SBSL–300 model is very user friendly, and also has several other outstanding features. In fact, it is built using the most modern micro processor controlled label dispensing system. The vial labeling machine also includes the latest sensing system for labels, and many other products. It is therefore regarded as the ideal machine for labeling round vials, small sized bottles, and several other round objects; which are made from glass, plastic, PET, HDPE, PP, etc. This swift and sturdy equipment has the ability to label at the most 300 units in a single minute; based on the diameter of the product and size of the label. Further

The Vial Filling and Stoppering Machine has been manufactured specifically to be used for filling injectable glass vials. The basic components of the vials liquid filling machine includes a turntable, conveyor belts made of stainless steel, unique eccentric pre-gassing, filling and other post-gassing aspects. The syringes are made of excellent quality 316L stainless steel. Apart from this, it consists of non-toxic tubing made of synthetic rubber of reliable and durable quality. Furthermore, the compact panel is easy to access, reach and use. Since the area between the machine that is responsible for filling the vials and the one responsible for stoppering the vials is less, hence, the risk of the contamination reduces considerably. It is very important to understand that the machine has been made to work specifically in a sterile environment to ensure that there is no contamination. These are designed for use under the laminar flow protection itself. The redesigning of the un-scrambler has been done to reduce the dead ends and increase efficiency of the spots that are difficult to clean. This is of compact cGMP model This is ideal for filling vials of 2ml to 250ml These are for piston pump/peristaltic pumps filling It provide high accuracy rate There is a system of No Vial-No filling and No Vial-Machine Stop to reduce wastage Systematic auto filling of the objects is designed through in-feed turn tables Reduction in any sort of cross contamination Easy validation processes A/C frequency setup to easily adjust the velocity Validation systems for cross check of bulk production Online mechanism Documentation through IQ/OQ Optional system of PLC with Graphical user interface

The Vial Filling and Plugging Machine was made to help in the filling of injectable glass vials with liquid. The machine majorly consists of a conveyor belt, turntable, pre-gassing, filling and post-gassing aspects. This Plugging and Capping Machine is made of stainless steel material of 316L quality which passes the GMP standards and assures the best return on investment in the longer run as well. Synthetic rubber tubes have been made and compact panel allows easy reachability. Since the distance between filling and stoppering is pretty less, the risk in getting any contaminations reduces considerably. The Automatic Filling Plugging Machine clearly needs a sterile environment to work in. It also offers a laminar flow protection. Redesigning of the un-scramble has been done to remove the dead ends and clean the machine properly. It is ideal for vials that are of 2ml to 250 ml Compact cGMP model has been adopted Peristaltic or Piston pump has been used for filling the vials appropriately Accuracy of the machine is the highest as compared to its competitors The turntable that takes the in-feed has been attached to the machine for automated feeding of the objects Contact parts are made of AISI Stainless steel 316L material and the non contact parts of the machine are compiled of AISI Stainless Steel 304 Contamination possibility is minimal Validation has been made easier for small or large batches both Speed adjustment through variable AC frequency drive is also feasible Counting can be done easily through the digital counter On-line systematization Validation documents of IQ/OQ

Accuracy : + 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh)

The Vial Filling and Cap Sealing Machine is a single multi functional machine that can be used for filling injectable glass vials, stoppering them with the usage of rubber and for sealing them as well with high quality aluminum material. Although this Vial Cap Sealing Machine can do many functions; however, it is a very compact Vial Filling Machine. If you have been looking for something similar along these lines, please feel free to contact our experts for advice or assistance for the most suitable Filling and Cap Sealing Machine for your business. This machine has been termed as the ideal solution for companies looking for small but tunnel based filling line operations. Ideal for 2ml to 100 ml volume vials Contamination is not possible The size of the turntable is 18 inches for automated feeding of the vials Counter for counting the number of vials Machine is made of 304 Stainless Steel and the contact parts are made of 316L SS Matt finish has been given to the stainless steel Liquid filling syringe is used Control panel for controlling and managing everything No Vial-No filling system No Vial-No Bunging system No Vial-No Cap system Motor and gearbox are imported Vibratory bowl for feeding rubber bungs and caps Needle height can be adjusted Delril material used to make star wheel and guides Acrylic guard structure can be opted for Castor wheels are put to increase the portability of the machines Height adjustments and volume control functions are also there

The Vial Aluminum Cap Sealing Machine is used for sealing glass vials. These machines have been specifically used in pharmaceutical companies. The machine puts an aluminum cap on the vials for sealing them after they have been properly filled and stoppered. The vials are injectable glass vials essentially. In accordance with the required amount of output, you can easily alter the number of sealing heads. The steel frames and doors in this Aluminum Cap Sealing Machine is used for servicing the machine in the best possible manner. The turntable of the filling machine continuously feeds conveyor belt. The Aluminum Vial Cap Sealing Machine ensures placement at equal intervals. During the infeed star wheel, the vials pick up their seals before the delivery chute is approached. The free spinning sealing rollers then complete the sealing process of the Aluminum Cap Sealing Machine. cGMP model used 'No seal in chute - Machine Stop' system has been integrated 'No Stopper on vial before sealing - machine stop' system enables the machine to stop in case no stopper on a particular vial is found before the sealing can be completed A single motor is used to put all the parts into loop i.e. conveyor, platform and star wheels. Speed can be easily controlled Parts of teh machine that come into direct contact with the aluminum cap are made of Stainless Steel which fits the GMP standards also Rollers ensure that no damage is done to the caps allowing flexibility in case the neck of the vial is larger or smaller. Sealing pressure can be controlled Speed can be adjusted through drivers Counter for counting the number of vials Photo sensing device to stop the machine if the aluminum caps finish in the delivery chute If the vial is overturned or more than the allowed dimensions, the machine will stop automatically Acrylic cabinet

Multipack is leading player providing complete packaging solutions for Printed Labels – Shrink Sleeves & Wrap Around; Laminates – Rolls & Pouches; Speciality Flexibles – Shrink Packaging Films and Printed Multilayer Extruded Films & Pouches; General Flexibles – Blown Films; Industrial & Retail Bags and Garment Bags; from designing to manufacturing through best in class Prepress & Cylinder Engraving and end-to-end Conversion Capabilities including Roto-Gravure and CI-Flexo Printing Multipack is is one of India’s largest manufacturers of Shrink Sleeves. We provide PVC and PET Shrink Sleeves in 30–80 micron range, in both Roll-form and Cut-form options. Our solutions include Matte, Metallic, and Twin Sleeves for Promotions and Profile Sleeves for Full Body decoration. We offer Wrap-Arounds in Pearlised Opaque, Transparent and Metallic finishes for Carbonated Beverages, Packaged Drinking Water and other suitable applications for high speed bottling lines.

Manufacture and export all type of Shrink Sleeve Labels and Shrink Sleeve printed label rolls for Pharmaceuticals, Dairy, pesticides, Distilleries, Breweries, Cosmetics, Toiletries, Lube, Edible Oil, Food, Ancillaries Industries , Whether your requirements call for PVC, PETG, OPS, Tamper Evident Seals, Printed Shrink Sleeves, 360° Shrink Labels, Pre-Forms, Multi-pak Promotional Shrink Bands or Specialty Bands, These products have shrinking capacity and excellent print ability and high insulation property

Two pieces Induction Heat Seal covers a wide range of containers, providing a hermetic seal against leaks, contamination and oxidation. Two-piece liners form a fused seal to containers, which must be cut or pierced for removal, leaving an aluminum seal on the container land area. b.) Two pieces Induction liner is used to seal the opening of a plastic or glass bottle with heat seal coating. c.) Basically, Liner consists of Backing and Aluminum Seal layer, and those two layers are attached with wax. After capping a container which Induction Liner is inserted, we seal it by using Induction sealer.

Multipack is leading manufacturers and suppliers of an excellent quality range of Pharmaceutical Rubber Stopper such as Rubber Stopper For Small Volume Injection, Chemical Rubber Stopper, Lock Rubber Stopper, Vial Rubber Stopper, Rubber Bottle Stopper with sizes rubber stoppers, 13mm rubber stopper, 20 mm rubber stoppers, 30 mm rubber stoppers and 32 mm rubber stoppers etc. These products are manufactured using high quality natural rubber and are appreciated for their features like heat resistance, high tensile strength, seamless finish and flexibility. We offer these products in various specifications as per the specific requirements of clients. Our wide gamut of quality assured products encompasses Aluminium Seals, Injectable Rubber Stoppers, Serum Rubber Stoppers, Infusion Rubber Stoppers, Lyo Rubber Stoppers, Blood Collection Tube Rubber Stoppers and Dental Plungers And Seals which are detailed as follow

Multipack is leading player providing complete packaging solutions for Printed Labels – Shrink Sleeves & Wrap Around; Laminates – Rolls & Pouches; Speciality Flexibles – Shrink Packaging Films and Printed Multilayer Extruded Films & Pouches; General Flexibles – Blown Films; Industrial & Retail Bags and Garment Bags; from designing to manufacturing through best in class Prepress & Cylinder Engraving and end-to-end Conversion Capabilities including Roto-Gravure and CI-Flexo Printing

We are manufacturing and exporting a wide range of Automatic High Speed Flat Bottle Double Side Self Adhesive(Sticker) Labelling Machine. These Automatic High Speed Flat Bottle Double Side Self Adhesive(Sticker) Labelling Machine is highly acclaimed for its features of smooth operations, optimum performance, low maintenance and long service life.

The Injectable Powder Filling Machine is ideal for adding injectable powder into vials. The exterior of the machine is essentially made up of stainless steel i.e. the parts of the machine that come into direct contact with air - such as container and rubber stopper etc. Furthermore, to service the machinery in the best possible manner and to ensure the best quality comes from this powder filling machine, the welded steel frame is also made using stainless steel which has access doors to it as well to increase the longevity of this automatic powder filling machinery. During the operations of the machine, you will certainly realize the number of varied precautions and safety measures have been adopted keeping in mind the overall performance and high quality output of the machine. For example, there is a piston in each port and there are about 8 ports in each powder wheel. So, if you are also looking forward to buy one, you should certainly have a closer look at the technical specifications and the salient features given in the following few paragraphs. Sleek model of cGMP "No Vial, No Filling" feature makes the product economical Numerous Dosing Systems Digitalized counting system for production output Removable parts for compulsory sterilization process Irregular frequency of drive in order to control speed rate Safety precautions against overload and jams through contractors and relays Customized and independent drivers to run the filling and sealing processes separately Built-in rubber stoppering unit for high performance of this vacuum type powder filling machine High volumetric filling accuracy maintenance techniques

Accuracy : + 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh)

The Injectable Liquid Filling Machine is promoted for usage for customers who require machinery for filling injectable glass vials. Some of the major parts of the machinery include a conveyor belt, unique eccentric pre-gassing, fill ups and post-gassing of the vials. The machine consists of efficient and accurate syringes, synthetic rubber tubing with a non-toxic speciality and compact panels. All these parts have been manufactured using the best quality stainless steel for your machine. The short distance between the filling feature and the stoppering unit minimizes the risks relative to contamination of the liquid from external air contact. This injectable liquid filling machine is designed in such a manner that it should be used in a sterile environment only and for usage in the laminar flow protection only. The part of un-scrambler has been especially designed to ensure that the dead ends are removed and it becomes easier to clean the spots. Compact GMP modelling Contact parts are all made of stainless steel of 316L and the other parts which will not come in direct contact with air or the liquid are made of 304 Stainless steel quality The feature of No Ampoule and No Filling system has been adopted The minimum change over parts are of 1 ml to 20 ml ampoule size only Centering around the ampoule neck while the process of flushing and filling are in progress is also done Nitrogen gas flushing is a high possibility before, during or after the filling process The machine is easy to clean and maintain since it is available with full accessibility Pre warming station is present Minimum over time change is required

Two pieces Induction Heat Seal covers a wide range of containers, providing a hermetic seal against leaks, contamination and oxidation. Two-piece liners form a fused seal to containers, which must be cut or pierced for removal, leaving an aluminum seal on the container land area. b.) Two pieces Induction liner is used to seal the opening of a plastic or glass bottle with heat seal coating. c.) Basically, Liner consists of Backing and Aluminum Seal layer, and those two layers are attached with wax. After capping a container which Induction Liner is inserted, we seal it by using Induction sealer.

The High Speed Dry Syrup Powder Filling Machine was manufactured primarily to help in the filling up of bottles with the right type of powder. The machine is used to minimize the effort of filling bottles manually and reducing the number of mistakes that might be caused otherwise. The bottles are filled with the usage of in-feed turn table. Guide supply bottles are used to put bottles on the conveyor belts at the specific speed rate so that the filling of the bottles is accurately completed. The filling head is also present on the top of the machine plate in the same line. Bottle sensors are used to identify the bottle and fill it in with the right quantity of powder as mentioned. The bottle then goes to the sealing shaft on the conveyor belt. The product has a No Filling - No Container policy which allows itself to become the most cost effective machinery in the industry The machine can be operated from single stroke to four strokes at a time The machine provides an output of 50 fill ups per minute with high amount of accuracy which also essentially depends on the type of powder and the size given at the first place Every part of the machine which comes in direct contact with the product has been specifically made of S.S 316 material. This has been done keeping in mind the mandatory sterilization of the machine at a later date The architecture of the machine has been made of heavy steel. This was done to avoid any type of vibrations during the transit In order to control the speed of the conveyor, A/C frequency has been integrated as well The feature of Endless conveyor belt prevents any type of jams because of spilling of powder due to one reason or the other AC frequency machine has been used to ensure that the speed is easily controlled of the conveyor Provision of an endless conveyor belt is there to prevent any jam or wastage of powder through spills It is extremely easy to use, clean and assemble

The Glass Ampoule Filling Sealing Machine has been assembled based on the most tried and tested module and principle of slant travelling of ampoules during the filling and sealing of ampoules through the Ampoule Filling Machine. This is done to ensure that the maximum amount of optimization of resources is done for filling and sealing of all types of ampoules that vary from each other in terms of dimensions, thickness and or any other variation. Matt Finish is given to the filling units that is built on the Stainless steel material square pipes and these are completely made of SS coverings. In order to ensure that the users do not face any issues with the cleaning and maintenance of the machine, a considerable sized opening is given at the bottom. An electrical control panel has also been made in a pendant form which can be easily removed from the machine in order to further ease the process of operations and to ensure that the operations are safe. This machine has been considered as the best glass ampoule filling and sealing machine for industries like cosmetic, pharmaceutical, agriculture and chemical. No Ampoule and No filling system means a process applied to ensure that any type of wastage is avoided Ampoule size of 1ml to 20ml is the minimum change over part required Best Quality Stainless Steel is used for the construction of all types of parts of the machine Neck centering during flushing and filling of ampoules Pre warming station installed beforehand For easy maintenance of the machine, complete accessibility is given Sleek GMO model Nitrogen gas flushing allowed

The Flip Off Cap Sealing Machine has been designed to increase the rate at which sealing of glass vials was done till now. This is a compact model to help you increase the efficiency and the output of the production. If you have been searching for the best Flip Off Cap Machine then Multi Pack Machinery offers the most cost effective machine for your business. This machine is used for flip off cap sealing through aluminum of the glass vials that are already filled and stoppered. This Automatic Cap Sealing Machine is majorly used in the pharmaceutical industries. Furthermore, on the basis of the output required, one can easily change the sealing heads and alter the processes. Integration of complete cGMP modelling This is ideal for PP/Flip off caps It has a No Seal in Chute - Machine Stop system for better functioning Also, it consists of the No Stopper on Vial Before Sealing - Machine Stop system A single motor is used to operate all the major systems i.e. conveyor, star wheels and platform turret. The speed is also controlled by this motor. However, the speed can be controlled in accordance with the requirements through the operating panel. Parts exposed to the air are made of high quality stainless steel The free spinning sealing rollers are made with the usage of springs in them. These are used to reduce any damage that can be caused to the caps. Sealing pressure can also be regulated in accordance with the different gauges and caps Drivers have been installed to control the speed i.e. variable A/C frequency Digitalized vial counter to count the number of sealed vials

We are offering our clients Printed Foil Induction Wads which are laminated with aluminium foil to provide security and authenticity to the seal in addition to the normal sealing capability. These wads are designed and manufactured using high quality raw materials and advanced technology under the guidance of skilled professionals.

The Eight Head Ampoule Filling Sealing Machine has been manufactured on the basis of a popular principle in machines i.e. slant travelling of ampoules during the filling and sealing process. This is done to take care of a diverse variety of ampoule dimensions of neck and thickness of the present standard ampoules. The filling unit was built on stainless steel square pipe framing and is totally made of stainless steel coverings. The stainless steel is made of matt finish. Furthermore, the huge opening is made and available at the bottom side of the Automatic Eight Head Ampoule Filling and Sealing Machine to ensure that the cleaning is much more easier as compared to other machines. The pendant type electrical control panel is removed from the machine to ease the cleaning process even more. These processes allow a better way of operation of the machine as well. Sleek or compact GMP modelling of the machine Every contact part of the machine is constructed using SS 316L and the non contact parts are all made of SS 304 material of the most superior quality The change over parts are minimum i.e. from 1ml to 10ml size of ampoules The system of no ampoule and no filling has been integrated to increase the optimization of the materials Centering of the ampoule necks is done while flushing and filling is done Complete accessibility enables high maintenance allowance Pre warming station has been integrated as well Easy cleaning and low change over time

The Dry Syrup Powder Filling Machine is used largely for the purpose of filling large volume of powder into appropriate containers. These type of machines are majorly used in industries such as pharmaceutical, veterinary, herbal products, cosmetic and food. The machine has been especially designed in such a manner that the operational effectiveness and efficiency of the whole process is not hampered in any manner. Certain important aspects include the presence of the magnetic clutch, dry syrup powder filling lines and the bottle sensors that further strengthen the working of the entire process in a factory. The product has a No Filling - No Container policy which allows itself to become the most cost effective machinery in the industry The machine can be operated from single stroke to four strokes at a time The machine provides an output of 50 fill ups per minute with high amount of accuracy which also essentially depends on the type of powder and the size given at the first place Every part of the machine which comes in direct contact with the product has been specifically made of S.S 316 material. This has been done keeping in mind the mandatory sterilization of the machine at a later date The architecture of the machine has been made of heavy steel. This was done to avoid any type of vibrations during the transit In order to control the speed of the conveyor, A/C frequency has been integrated as well The feature of Endless conveyor belt prevents any type of jams because of spilling of powder due to one reason or the other

Automatic, User Friendly, Front and Back Labeling Machine are suitable for applying Front and Back Labels on FlatOvalSquareRound shape containers with output Up to 240 Labels per minute depending on products and label size. Automatic Product Alignment system synchronized with top holding belt system. our labeler machine can run with different application and products with different industries Single side flat bottle labeling machine , Front side labeling machine , Back side labeling machine , Side Labels applicator for on FlatOvalSquareRound shape containers , Wrap Around labeler machine, Flag Label applicator , Top Label applicator machine, Single Side labeler machine , Double Side labeler is uses for the labeling of filled & sealed BottlesJarsCans etc Labeling machine is used to apply labels to various products such as Ampoules, Vials, Bottles, Jars, Container, Canisters, Cartons, Boxes, Caps packages etc. The labeling machines are also known as labeling systems, labeling equipment, labeling machines, labeler, labeling machinery, labelling machinery, labelling machine, labellers, labelling equipment. Many Labelling machines are not only used to dispense or apply labels, but also to print labels. There is a wide range of Labelling machines available in the market, ranging from high–production units that allow for complete automation of the print and apply process to manual devices that provide for simple label dispensing.

The Automatic Vial Powder Filling Machine has been especially designed to provide assistance in filling injectable powder into vials. The steel frame has been manufactured with the usage of stainless steel sheets which ensure easy accessibility to the doors while cleaning the same. Exceptional amount of accuracy has been kept in accord to ensure that the highest quality machinery is delivered to the customers. This Automatic Vial Filling Machine has been supplied with stainless steel to increase the lifespan of the machine as a whole. Parts that are directly exposed to air are specifically made of stainless steel for this very reason. cGMP model that is compact in nature The absence of vial and filling system increases the cost effectiveness of the whole Automatic Double Head Auger Powder Filling Machine Multiplicable dosing system Ability to set up the depth of the piston giving accuracy on the amount of powder that has been injected To increase the production output, a digitalized counter has been integrated For controlling speed, variable frequency drive has been restored Safety precautions have been undertaken with the installation of the clutch systematization Removable parts for easing the utmost important process of sterilization of the machinery time and again To avoid any overload or jamming of the system, motors have been upgraded with contractors To reduce the length of the laminar flow, in built rubber stoppering unit has been used. This also helps in saving a lot of unnecessary occupation of space Individual drivers have been used to compare the speed of filling and sealing

Accuracy : + 1% depending upon consistency and uniformity of bulk density of Injectable Powder under controlled level of humidity (Below 28% Rh)

The Automatic Vial Filling Machine has been introduced for the sole purpose of providing assistance in the filling of injectable glass vials. The Conveyor belt has been manufactured using Stainless Steel Stat. Furthermore, the basic parts of this fully automatic aseptic liquid filling machines consist of conveyor belts, filling, pre gassing and post gassing aspects. Apart from this, it also has 316L syringes made of Stainless Steel. The machine also has non toxic rubber tubing that is synthetic in nature. The easily reachable compact panel is another major advantage of the machine. It has a compact cGMP modelling It is ideal for filling vials that range from 2ml to 250 ml The filling accuracy of this machine is the highest as compared to other machines and its predecessors The integration of the No vial and no filling system has also been done like all others to increase efficiency of the product It also has the no vial machine stop systematization Automatic feeding of objects is feasible through the machine Every part of the machine is made of stainless steel There is no cross contamination and safety of the powder has been taken into consideration Validation process has been simplified whether the batch is small or large A digital counter has also been placed for counting the production output in the best possible manner IQ/OQ validation documentation can also be done The only optional feature is that of the PLC System along with the Graphical User Interface

The Auger Powder Filling Machine has proven to be the best solution if you are looking for a machine that helps in filling a large number of bottles, jars or similar type of containers. This high speed auger powder filling machine has the capability to provide an output relative to 40 containers per minute. These machines are ideal for industries such as food, biotech, veterinary and pharmaceutical etc where bottles have to be filled in on a regular basis. It is also used by companies supplying beverages. The Powder Filling Machine has been built majorly on stainless steel legs with sturdy welded frame. The unit of the machine that is responsible for filling bottles is kept on pillars which are majorly supported by top plates. These also have height adjustment features that help in controlling the height at which we are comfortable in working. The All Fill feature handles all the applications very easily High accuracy of filling bottles is maintained which is close to 2%. Direct drive methods can be customized based on the requirements of a particular customer The innovative design of the auger filler makes it extremely easy to use, durable and portable Weight reading features have been integrated in every Auger Filler Machine to help in maintaining the accuracy while the same is being read Customization is possible in order to manufacture a machine in accordance with the requirements of a customer Stainless Steel material is used to avoid any contamination, ensure that the machine is easy to clean and to ensure that the machine lasts longer especially when every part of the auger fillers that comes in contact with air is made of stainless steel only