Nova Valves Dealers in Memco, Ahmedabad

• Material: Stainless Steel
• Application: Water Fitting
• Feature: Good Quality, Durable, Corrosion Proof

Salient Feature Meet design requirement standard of ASME B 16.34 / BS 5351 /API 6D / ISO -14314 and testing requirement standard BS 6755 / API 598 / ISO 5280 /API 6D. Fire safe testing comforts to API 607 /API 6FA and BS 6755. Fire safe design: - valves' fire safe is designed in accordance with API 607. when non-metal sealing material are decomposed by plant fire the ball comes into contact with the edge of the metal seat ofthe body or connecter by the line pressure in the upstream to shut off the line fluid to minimize internal leakage through the valve bore (port). Soft seating recommended for service temperature up to 220'c. Metal to metal seating offered for higher temperature. PTFE seats are located in grooves well protected against damage and cold flow of seal under pressure. The metal lip acts as a secondary metallic seat in fine safe design. Anti static devices ensures electrical continuity between ball, stem & body. Flexible lip-seats compensate for wear and changes of pressure. Anti blow out stem construction. Long operation life with low torque design. Zero leakage from gland side due to PTFE"V"- shape gland packing. A bottom back seals enabling repacking when the valves are under pressure. Trunnion mounted ball provide for more then 4" size in higher class. Specially designed die-formed graphite packing controlled clearances between stem and gland for guaranteed low emission meets 100 PPM maximum Fugitive emission levels. Ball is heart of ball valves. Low operating due to mirror finish surface of ball controlled Sphericty up to 0.02 mm. Bearing pads fix the ball and absorb total thrust of the medium relieving the down stream sealing of the load. A valve with trunnion supported ball having two floating & spring loaded seats, In closed position they provide blockage of flow from both end when the cavity Pressure is drained. Flange end dimensions conforms to ASME B 16.5/ API 605/ BS 3293 /DIN. Face to face end dimensions conforms to ASME B 16.10 / API 6D.Face to face end dimensions conforms to ASME B 16.10 / API 6D. Butt welding end dimensions conforms to ASME B 16.25. Option Electro less Nickel coated ball are also available on request. Locking arrangement design in request. Gear, electric actuator or pneumatic actuator available. Extended gland designed provided for low temperature and cryogenic services (cold box and non cold box applications) to conform to requirement of BS- 6364. Sealant injection design available on customer request.Ring joint facing available in higher class. New Developed Metal to Metal High Pressure Ball Valve on request. Ball Valve 1500# 2500# Class Design on request.

We are the leading exporter and supplier of this products.

Single piece ball valve, These Ball Valves come in Single Piece (12 to 4) Two Piece (1 to 8) as well as in Three Piece Design (12 to 12) to suit various critical, non-critical applications and pressure rating up to 1500 class in both full bore & regular (reduce) bore design.

JD Wafer Ball Valves :-JD Wafer type ball valve has short distance between the valve seat and the end flange, low remains, superior in sealing, long service life etc. have 2-way and 3-way body version, J D Wafer Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size. J D also offering Wafer Ball Valves with either Pneumatic or Electrical actuator operated for automation.The Wafer Ball Valve is typically Lower Cost, Lower Weight and takes up Less Space than an equivalent Split Body Flange Ball Valve. It can also be used for Higher Pressure Application

• Size: 1 to 20 Inch, 1 to 12 Inch, 1 to 8 Inch
• Material: Metal
• Application: Water Fitting
• Color: Silver
• Feature: Durable
• Pattern: Plain
• Pressure Class: 150#, 300#, 600#, 900#, 1500#

• Brand Name: Zebco
• Material: Stainless Steel,Cast Steel,Stainless Steel, SS304, SS316,Brass
• Connector Type: Flanged End
• Material Grade: ASTM
• Color: Silver
• Design: 1pc / 2pc / 3pc
• Condition: New
• Automation Grade: Manual, Automatic
• Application: Water Fitting, Oil Fitting, Gas Fitting
• Size: 1 inch to 48 inch
• Certification: ISO 9001:2008
• Feature: Investment Casting, Casting Approved
• Packaging Type: Wooden Box
• Flange Size: As per Standard
• Type: Water Ball Valves, Oil Ball Valves, Gas Ball Valves, Ball Valves
• Country of Origin: India
• Media: Water
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature
• Bore Type: Full Bore
• Number Of Way: 4way, 3way, 2way
• Wog Rating: 150, 300, 600
• Lever Type: Handle / Actuator
• Type Of Stem: SS

• used in pipe lines: Flow control,etc

Manufacturing 3pc ball valve, 1pc ball valve.

• Size: 1.1/2inch, 1.1/4inch, 1/2, 1/2inch, 1/4, 1/8, 1inch, 2inch, 3/4inch, 3/8
• Type: Ball Valves, Gas Ball Valves, Oil Ball Valves, Water Ball Valves
• Material: Carbon Steeel, Metal, Stainless Steel
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Number Of Way: 2way, 3way, 4way

We are offering ball valve.

• Application: Gas Fitting

• Size: 1.1/2inch
• Type: Flanged Ball Valve
• Material: Carbon Steeel
• Application: Gas Fitting
• Color: Blue
• Feature: Blow-Out-Proof
• Technics: Gear Operated
• Power: Hydraulic
• Pressure: Triple Offset Butterfly Valve
• Structure: Double Half Shaft
• Port Size: 0.1mm-5cm
• Number Of Way: 2way
• Country of Origin: India

Being a distinguished Manufacturer and Supplier of High Pressure Ball Valves, we endeavor to achieve 100% customer satisfaction. Their optimum performance, efficient design and longer service life are available for economical prices. Our wide range is manufactured using first-rate raw material. We meet the highest standards and parameters of quality set by the industry. Designs are made keeping different specifications in mind.    Additional Description:  High Pressure Ball Valve with a superior Shutoff Simple to Maintain High Pressure Ball Valve is easy to turn on All Seats are Preloaded Self-adjusting stem seals automatically High Pressure Ball Valve with a High surface Finish High Pressure Ball Valve Features: 2way & 3way 3PC High pressure Ball Valves, Full Port  End Connection: Thread End / Socket Weld / Butt Weld / Flanged End Materials: SS304 /SS316/CS.  Seat: Delrin, Peek, PTFE  Working Pressure (CWP):3000 /6000 PSI

• Country of Origin: India
• Type: Water Ball Valves
• Application: Water Fitting
• Color: Mulicolor
• Feature: Investment Casting, Easy Maintenance., Durable, Casting Approved
• Pattern: Plain
• Condition: New

• Country of Origin: India
• Material: Stainless Steel
• Type: High Pressure Ball Valves

  Size Range : 1/4 to 3″ Thread End / Socket Weld / Butt Weld / Flanged End Material Of Construction : Carbon Steel / Stainless Steel (SS 304/ SS 316) End Connection : Screwed End (BSP, BSPT, NPT)

With our customized packaging solutions, buyers can get packages made according to their specific requirements. Furthermore, they can rest assured the packaging is industrial grade. Our clients can rest assured for the safety of their financial details, along with quickness in payment processing.

We Proudly Present Ourself as the Leading Manufacturer and Exporter of ball Valves with Strict Quality Control Measures to Ensure that Only the Best Ball Valves Reaches the Market. with Our Main Mission of Customer Satisfaction with Superior Quality Products, We Always Deliver Items On Time with Very Competitive Prices. Ball Valves Provide Tight Shut-off and Character Control. They have High Range Ability Due to the Design of the Regulating Element, Without the Complications of Side Loads Typical of Butterfly or Globe Valve. We Manufacture and Export a Wide Range of Ball Valve. applications : Water, Gas, Steam, Oil & Chemicals Etc.types : 2 Way, 3 Way, 4 Way,1 Pc, 2 Pc & 3 Pc Designsize : 1/8” to 16”