Oil Fired Heaters Dealers in Ahmedabad

• Approx Price: Rs 3.25 Lakh / Unit

Our Gas Fired Thermic Fluid Heaters are built to last long. We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. Customers are free to place small as well as bulk orders, timely deliveries of the same are our topmost priority.

Thermic Fluid Heater - Solid Fuel Fired   Salient Features of This Model Furnace is designed for multi fuel options, with major thrust on proper selection of combustion grate, furnace height, combustion volume, fuel feeding systems. To ensure efficient combustion & lesser heat loss. Coils are designed with optimum flow consideration to gain maximum heat from flue gases. Coils are tested at 3 stages before final dispatch as a part of Thermotech’s stringent quality control. ID Fan, FD Fan & booster fan (in any) are selected as per fuel’s perfect air-fuel ratio requirement, which ensures optimum air quantity for combustion & thus saves power consumption. Expansion Tank capacity is specifically selected after consulting total holdup of Thermic Oil. Deaeration Tank is specially designed considering flow & temperature requirement. Thermotech offers complete solution of Thermic Fluid heating system along with Pipeline, Pollution control equipments, fuel handling, etc on Turnkey basis. Auto Controls & Safety Thermic Fluid Temperature controlDigital temperature indicator-cum-controller cut of ID/FD fan of preset temperature and restart of preset temperature and restart of preset differential temperature to maintain system temperature. Stack Temperature ControlA blind temperature controller cut of ID/FD fan and sound alarm if stack temperature exceeds to preset temperature. Low/NO Flow of Thermic FluidDifferential pressure switch connected across intel and outlet headers signals low flow alarm in case of low fluid pressure of Thermic fluid in coils. Low Level of Thermic FluidThe visual level indicator and float actuated lever switch fitted in expansion tank signals alarm in case of low level thermic fluid in the system. Thermic Fluid Pump Motor TripIn case of thermic fluid pump motor trip, electrical interlocks, cut off ID/FD fan. Power FailureDiesel engine drive keeps thermic fluid moving in the system to prevent its degradation and overflow. Excess Furnace Bed TemperatureDigital temperature indicator-cum-controller senses furnace bed temperature and cut off ID/FD fan above set value(for FBC unit). Benefites Multi-Fuel Option Low Power Consumption Energy Optimization Low Maintenance

 LDO Gross Calorific Value : 10700Kcal/Kg.   LDO Net Calorific Value : 10200Kcal/Kg.   FO Gross Calorific Value : 10200Kcal/Kg.   FO Net Calorific Value : 9650Kcal/Kg.

With sincerity and hard work of our professionals, Wood fire water heater capacity is 300 ltr to 3000 ltr. we have carved a niche for ourselves in this domain by offering Wood Fire Water Heater that is demanded in various industries like pharmaceutical, chemical, food and others. Available in several specifications, offered products are manufactured using optimum quality raw material and advanced technology. In addition to this, our offered products undergo various tests under the supervision of quality controllers, in order to ensure their flawlessness. We are one of the renowned names in this industry for manufacturing and supplying high quality range of Wood Fired Water Heater. Manufactured using quality tested components and innovative technology, this heater is made in other specifications to cater the requirement of our valuable clients. Our provided heater is tested by our experienced quality controllers against diverse quality parameters using latest tools and techniques to ensure its flawlessness.

• Voltage: customized
• Condition: New
• Warranty: 3 Years
• Type: Air Heater
• Power Source: Diesel
• After-sales Service Provided: Overseas third-party support available
• Power(W): customized
• Packaging Details: International Standard Packing
• Port: Any port in India
• Place of Origin: Gujarat, India

• Capacity: 50,000 Kcal/Hr. to 15 Lacs Kcal/Hr.
• Fuels: Coal,Wood,Lignite,Pet-Coke, Agro Waste Fired

3-Pass Horizontal Design Thermic Fluid Heater has excellent fuel efficient Unit. Salient Features: . High Efficiency : 87+2% on LCV of Fuel. . High unit dependability reducing down time and thereby maintenance costs. . Maximum reliability of operation leading to high productivity. . Prompt service & spares back up. Capacity:1,00,000 kcalhr. to 30,00,000 kcalhr. Temperature:upto 400°C Fuel:Oil Gas Burner:Two Stage Three Stage Modulating Pressure Jet Fully Automatic High Fuel Efficient IMPORTED Burner

• Temperature: Up to 300-350°C

We expertise in manufacture and supply of Wood or Coal Fired Horizontal Thermic Fluid Heater that are known for high performance and durability. These heaters have an external furnace where fuel is burned and the heater assembly consists of a nest of concentric helical tube coils placed within a sturdy MS shell. Due to their excellent features and fuel efficiency these are highly demanded among our clients.External firing arrangement eliminates the possible damage to the thermic fluid heater coil.

Our oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil fired heaters, thermal oil heater are optimized thermodynamically and have high efficiency along with brilliant heat transfer to the thermic fluid. Their combustion chambers are dimensioned properly and have sufficiently long length. Thus, the flame can burn fullOur oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil fired heaters, thermal oil heater are optimized thermodynamically and have high efficiency along with brilliant heat transfer to the thermic fluid. Their combustion chambers are dimensioned properly and have sufficiently long length. Thus, the flame can burn fully, by keeping the emission values very low, for all fuel types. , by keeping the emission values very low, for all fuel types.

We are offering oil/ gas fired thermic fluid heaters. Contact us for more information about oil gas fired thermic fluid heaters and how we can deliver you exceptional services by our highly experienced engineers. Sparx boiler is premium manufacture and exporter company of oilgas fired thermic fluid heaters. Get the perfect reliable, efficient, and environment-friendly solutions for your simple to complex requirement for oilgas fired thermic fluid heaters.

• Temperature: Up to 300-350 Degree C
• Fuel Type: Bio mass
• Firing Mode: Automatic

• Material: SS, MS
• Application: Industrial
• Brand: Thermotech
• Surface: Galvanized
• Efficiency: 92%

• Application: Textiles,Salt,Chemical,Printing,Colour,Agro,Pharm,Enviro,Etc...
• Material: Stainless Steel
• Fuel: Oil/Gas/Solid/Elect
• Voltage V: 415
• Maximum Temperature: Up to 380 deg C
• Heat output: 10M

Indirect Air Heaters are an advanced Shell and Tube design heat Exchangers. The flue gases pass through the main combustion chamber Connected through flue tubes, arranged to give three pass; while the air is forced over the combustion chamber and flue tubes thus delivering clear uncontaminated hot air.

industries requiring high temp heating, where agro-waste or other conventional solid fuels are available, and our thermal oil heaters form a low operating cost option to the customer. Range of 1, 00,000 Kcal/hr. to 10, 00,000 Kcal/hr. 3-pass compact, vertical design, in which the heat exchanger coil is installed above an integral furnace fitted with grate bars for manual firing of agro-waste fuels. FEATURES  Low operating cost,  Reliable operation, Safety against low thermic fluid flow Precise thermic fluid temperature control

• Maximum Temp:: 300° C

Automatic Mechanised screw fuel feeding makes fuel feeding OFF & ON when set temperature is achieved & reduced, respectively.Micro Processor Based VF fuel feed drive is used to adjust the rate of fuel feeding as per Plant load requirement. Most of the Solid Fuels, including Crushed Coal Lignite Agro waste DOC Saw Dust can be used in this system.Large size Air Pre-Heater Water ,Pre-Heater, reduces dry flue gas losses and improves the Waste Heat Recovery and increases combustion Air Temperature.

husk fired thermal fluid heater, Coal Fired Thermic Fluid Heater

Solid Fuel Fired Thermic Fluid Heater, industrial thermic fluid heater

Oil Fired Thermic Fluid Heater, Hot Air Generator, Air Preheaters

Coal Fired Thermic Fluid Heater, Steam Boiler Fabrication Services

Wood Fired Water Heater, Hand Operated Potters Wheel, Gas Geyser

Coal Fired Thermic Fluid Heater, Heat Recovery Unit, Electric Water Generator

Bio Mass Fired Oil Heater, Fluidized Bed Hybrid Boiler

Wood Fired Water Heaters, solar air heating systems

Solid Fuel Fired Thermic Fluid Heater, steam piping, Boiler Economizer