Oil Production Plant Dealers in Kathwada, Ahmedabad

• Feature: steel plates rigid to provide Accurate bending.., All pivots have hardened of ground pin bushes of five

Main drive standard make motor Electrical control panel with three speed inch,single cycle,Auto mode of operation. Two front sheet supports Manual back gauge with micro-adjusment swing stoppers. pair of lifting chains. fine stroke adjustment rod with limit switches. One suitable 5 way die and blade. (segmented ofr full length,EN-9 not covered under warranty) moveble console with emergency stop. onnage indicating - adjustment device. Manual centralized lubrication system with hand pump. bending chart.

• Capacity: 60-100 ton/day
• Usage/Application: Cassava, Soybean, Peanut, Sunflower, Cotton seed, Palm fruit etc. Oil extractor plant
• Automation Grade: Semi-Automatic
• Features: Oil refining
• Design: As per customer requirement
• Material: SS 304,SS 316 or Mild Steel 

Standard Feature Accessories: • Main drive standard make motor • Electrical control panel with three speed inch,single cycle,Auto mode of operation. • Two front sheet supports • Manual back gauge with micro-adjusment swing stoppers. pair of lifting chains. • fine stroke adjustment rod with limit switches. • One suitable 5 way die and blade. • (segmented ofr full length,EN-9 not covered under warranty) • moveble console with emergency stop. • Tonnage indicating - adjustment device. • Manual centralized lubrication system with hand pump.   • bending chart. Feature: • Mono Block Welded Steel Frame ultra tested-2062 • steel plates rigid to provide Accurate bending. • All pivots have hardened of ground pin bushes of five • piece guide slide lubricated by central hand pump • Repetitive accuracy is within +0.03mm Ram travel parallelism with out using sensitive & complex servo Hydraulics. • Most reliable Hydraulic components & sealing for international reputed design for 350 bar against operating pressire of 160 bar maximum. • Three cycles operation inch,Single cycle&Auto for grater operator convenience. • Three speed operation reduces ideal travel time which improves productivity. • Bending force easily adjustable From front for forgue tool of bending material.

80 ton to 1000 ton single cylinder & double cylinder special purpose ‘c’ type , ‘h’ type , 4 pillar guide & general purpose hydraulic presses..

General Information : • 2 HP HYDRAULIC POWER-PACK FOR 5 T CAPACITY PRESS.• 4-PILLAR GUIDED MOVING TYPE FRAME FOR UNIFORM DISTRIBUTION OF LOAD.• AUTO AND MAINTENANCE MODE SELECTION FROM PANEL. IN MAINTENANCE MODE, PLC OPERATION WILL BE BY-PASSED.• PUSH BUTTONS FOR LOADING TABLE MOVEMENT.• LOAD CELL WILL MEASURE THE AVAILABLE FORCE AND FEED THE INFORMATION TO PLC SYSTEM.• LINEAR SCALE WILL MEASURE THE APPROACH AND PRESSING LENGTH AND GIVE FEEDBACK TO PLC SYSTEM.• RAMP RATE SHALL BE CONTROLLED BY HYDRAULIC SYSTEM TO APPLY THE FORCE IN A LINEAR PATTERN.• RITTAL ENCLOSURE WITH ALL THE ELECTRICAL PROTECTION SYSTEMS AND UTILITIES LIKE TUBELIGHT, COOLING FAN, EXTRA PLLUG SOCKET, GLASS FUSE TERMINALS, BARRIERS ETC.• THE SELECTIVE ASSLY WILL BE SELECTED FROM HMI DROP DOWN MENU AND ALL THE REQUIRED PARAMETERS SHALL BE SET AUTOMATICALLY.• PHOTOELECTRIC SENSORS SHALL HELP DETECT POSITION FOR THE DEPTH OF TRAVEL CONTROL.• HIGH END PLC AND HMI MAKES THE SYSTEM RELIABLE AND ACCURATE• TOWERLIGHT INDICATION FOR IDENTIFYING THE TEST RESULTS: GREEN LIGHT FOR ACCEPTED ASSEMBLY, YELLOW LIGHT FOR RE-WORK ASSEMBLY AND RED LIGHT FOR REJECTED ASSEMBLY.• NO DIMENSIONAL QUALITY CHECKS REQUIRED BEFORE ASSEMBLY FOR MAKING SELECTIVE ASSEMBLY.

• Material: SS Body
• Driven Type: Electric
• Automatic Grade: Fully Automatic
• Type: Mini Oil Mill, Mini Oil Making Machine
• Warranty: 1year
• Country of Origin: India
• Product: MINI OIL MILL MACHINE
• Size: Small
• Usage: Home use

Bhumika mini oil machine is avaible 400 watt to 2000 watt, 400watt oil mill machine capacity 3 to 5 kg per hours 

We are one of the reputed manufacturers and suppliers of Scrap Belling Hydraulic machine, which are ideal for light scrape purposes. These are an environment friendly machines available in varied designs and dimensions to meet the clients' specific requirements. Our experts design our range as per the international standards of quality.  

Owing to our reliable transportation facilities, we are able to deliver the orders at the desired destination and on promised time. Only high-quality raw materials have been used for the production of our entire range. We check the raw materials against varied quality parameters before procurement.

Repetitive accuracy is within +0.03mm Ram travel parallelism with out using sensitive & complex servo Hydraulics. Most reliable Hydraulic components & sealing for international reputed design for 350 bar against operating pressire of 160 bar maximum.

• Capacity: 6 Kg/Hour
• Power: 1 HP
• Warranty: One Year
• Material: Stainless Steel
• Country of Origin: Made in India
• Machine Type: Domestic Expeller
• Brand: Megha
• Operation Type: Automatic
• I Deal In: New Only
• Model Number: MT-OIL
• Packing Dimensions: 460 x 380 x 240 mm

• Specialities: Low power consumption, Easy to install, Require low maintenance.
• Pressure: 2 x 1/4" x 80 = 40 Tons

• Brand Name: Riddhi
• Usage: Peanut Oil
• Minimum Order Quantity: 1 Piece

• Capacity: 2 MT / Day to 50 MT / Day Used (Waste) Oil Re Refining (Recycling) Plants

We are pioneer in Used Oil Re-Refining Plant Manufacturing, Erection and Installation. Lubricating oil after prolonged use in the engine’s crankcase gets degraded due to oxidation, presence of water, carbon particles, oxidation sludge etc. This oil, if not replace, will cause failure of the engine. The disposal of used oil is a major environmental problem unless it is processed safely as the indiscriminate disposal will cause pollution to water bodies and land fillings. The proposal is to manufacture petroleum lubricant oils and other petroleum based products, from waste used oils and manufacture of lubricants to the specification required to satisfy the International specifications.

We are main supplier of this product.

• Country of Origin: Made in India
• Automation Grade: Automatic, Semi-Automatic
• Brand Name: I & J Machinery
• I Deal In: New Only
• Table Height above Floor: 710 mm
• Motor Power: 3 kW
• Dimension of Dropping Hole: 100 mm

Flat Bed CNC Lathe Machine, independent chucks, slotter, Surface Grinder

• Type: Coconut Oil Making Machine
• Weight: 100-500kg, 500-1000kg
• Color: Black, Brown, Grey, Light White
• Voltage: 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Driven Type: Electric, Hydraulic

• Operating Mode: Manual, Semi-Automatic
• Max Force or Load: 0-30 ton, 30-60 ton, 60-90 ton
• Control Type: Non-CNC
• Brand Name: OHAM

• Type: Other
• Phase: Three phase
• Material of Construction: Stainless steel
• Height: 5000 mm
• Power Supply: 440 Volts, 50 Hz, A.C.
• Working Temperature: -10 DegreeC to 40 DegreeC (14 DegreeF to 104 DegreeF )
• Working Humidity: Up to 90 percentage
• IP Protection Class: IP54
• Total Weight: 8000 Kg. (Approx.)
• Features: Best quality, Smooth installation and commissioning, Lifetime support, Most competitive price.

40 BPM, lubrication oil, Vegetable Cooking Oil, Edible Oil Cans

mustard oil machine, Sugar Melting Vessel, Open Width Inspection Machine

palm oil mill, acrylic plastic sheet plant, Stone Crusher, screp grinder

Wire Rolling Machine, goldsmith machinery

floor mill

bale cutting machine, Hot Feed Extruder, Rubber Mixing Mill

mustard oil machine

Business, Sesame oil