Oil Pump Dealers in Amraiwadi, Ahmedabad

• Max Flow Rate: Up 1000 M3/hr
• Head: 10-30 Bar
• Material: Mild Steel
• Voltage: 220-240 V
• Frequency: 50 Hz
• Power Source: Electric
• Brand: Jiksan
• Warranty: 1 Year
• Packaging Type: Box
• POWER: 50-2000 kw
• Pressure Range: Up to 50 bar
• Temperature Range: -40 Deg C To 200 Deg C
• Features: Long working life, Smooth operations, Excellent functionality

• Country of Origin: India
• Type: Thermic Fluid Pumps
• Certification: ISO 9001:2008
• Application: Industrial Use
• Condition: New
• Automatic Grade: Manual
• Power: 10hp
• Pressure: High Pressure
• Warranty: 1year
• Driven: Electric

• Application: Industrial Use
• Automatic Grade: Manual
• Pressure: Medium Pressure
• Warranty: 1year
• Driven: Electric
• Size: Standard

• Brand Name: Achievers
• Features: Steady performance,Perfect finish,Robust design
• Material: Cast Iron or Stainless Steel
• Power Supply: 0.37 kW / 220 V
• Fuel Type: Diesel
• Head: Up to 35 m
• Horse Power: 0.20 hp to 2 hp

• Application: Industrial
• Power Source: Electric
• Max Flow Rate: 500 LPM

• Applications Used: Hot oil Transfer, Food Industries ,Boiler application, Thermic Fluid application, Hot water application
• Head: 10 Kg/cm2
• Capacity: 250 M3/Hour
• Pump Size: 25 mm to 300mm
• Speed Range: 1440/ 2900 RPM
• Temp: 350 Degree
• Sealing: High Temp Sealing Fitted
• Pump MOC: CS , SS 316

• Power: >10 HP
• Features: Low maintenance , Discharge flange is at top and radial , Heat resistant mechanical seal
• Item Code: 84137095
• Max Flow Capacity: 51-100 m3/hr
• Max Flow Rate: 50 M3/HR
• Head: 15 meter
• Material: Mild Steel

Lubrication Pump, Industrial Products, Rotary Gear Pump, SS Rotary Gear Pump

  General Information/Operating Principle: A balanced cylindrical rotor with hollow hub with series of curved blades running freely in eccentric casing. The sufficient sealing liquid, usually water, forms a solid ring on periphery of casing due to the centrifugal force. Since rotor is rotated in eccentric casing the blade creates working spaces whose volume increases as rotor rotates from lower to upper vertex and decreases as the rotor rotates from upper to lower vertex. The uniform distribution of working spaces on rotor periphery results in continuous suction and exhaust of gases.    Special Features:    » LOW ULTIMATE BLANK - OFF Down to 0.1 micron Hg. and less.  » HIGH EFFICIENCY - Even in the low Micron range.  » UNIFORMLY HIGH PUMPING SPEED - Throughout the broad range of 500 to 10 microns.  » RUGGED CONSTRUCTION - Designed and built for long, dependable service, even in severe applications, no special tools needed for maintenance.  » MINIMUM FLOOR SPACE - Unique modular design features compactness saves up to 50% of floor space required by conventional pumps.  » COMPLETELY PACKAGED - Including Separator Tank, Oil Level Indicator, Oil lubrication solenoide valve, Gas ballast, Common base plate, set of pulley, set of vee belt & motor slide rail etc.  » MINIMUM VIBRATION - Controlled balancing of the entire assembled unit reduces vibration to minimum.  » QUITE OPERATION - New valve design virtually eliminates valve maintenance and greatly reduces the noise usually present in high vacuum pumps.  » AUTOMATIC LUBRICATION SYSTEM - As soon as the pump starts, a solenoide valve takes over control of lubrication, providing proper flow of oil to sealing surfaces, When the pump is stopped, the valve prevents back flow of oil into the system. Operation is automatic with no hand valves to adjust.  » EFFICIENT OIL ENTRAINMENT - Exclusive built in entrainment separator substantially reduces oil carry-over and exhaust fumes minimizes oil losses and maintenance costs. Separator is completely integral with pump required no added space.  » PERFORMANCE ASSURED - Rigid quality control throughout production and complete final inspection including blank-off test and run in period are standard. This guarantees that the Oil Sealed High Vacuum Pumps you receive meets or surpasses all performance specifications.   Material of Construction:    » The Pump can be supplied in several materials to suit various applications, some of the materials of constructions are listed below.  » All graded Cast Iron with EN-8 steel shaft.  » Rotor and Control Plates in Bronze with Stainless Steel Shaft.  » All parts in Bronze with Stainless Steel Shaft.  » Rotor and Control Plates in Stainless Steel with Stainless Steel Shaft.  » All Stainless Steel constructions.  » Rubber lined Pump having casing, rotor, control plate and end cover in cast iron but rubber lined and shaft in Stainless Steel.  » Alloy - 20, Cast Alloys, Cast Steel   Applications:    » Chemical Processing: Vacuum Dehydration, Deaeration, Distillation, Vacuum Evaporation, Drying and Filteration.  » Food Processing: Vacuum sealing of bottles, Film Packing, Deaeration of Beverages, Freeze drying of Fruits, Vegetables.  » Agriculture: Vegetables Colling, Grain Drying, Fumigation.  » Petroleum & Petrochemicals: Vacuum Distillation and Refining Crude.  » Plastic: Vacuum Forming, Moulding and Coating of Plastic Materials.  » Textiles: Vacuum Drying, Dying, Material Handling and Solvent Extraction.  » Metallurgy: Vacuum Degassing, Purification, Melting, Heat Treating and Inpregnation.  » Laboratories: House Vacuum System, Chamber Evacuation, Research and Development.    

oil rotary vacuum pump, Vacuum Pump, oil rotary piston pump

• Models:: C.I and M.S Jacketed Model
• Brand:: Maruti
• Size:: 1 ½ “, 2 “, 3 “

Models : C.I And M.S Jacketed Model. Size : 1 ½ “, 2 “ , 3 “ Speed : 300 RPM To 700 RPM (Recommended) Concept : Single Helical Gear. Brand : Maruti, Place Of Origin : MEW Pump Division, Abad, India Structure : Gear Pump, Pressure : Low Pressure. Construction : Jacketed Non Jacketed. Extra Accessories Needed : Hot Oil Circulation Pump To Keep Pump Warm Inside ( It Helps Bitumen Emulsion In Liquid Form, Otherwise Pump May Get Stuck ) Application : Asphalt Plants, Loading Unloading Of Bitumen, LoadingUnloading Of Crude Oils.   Speed: 300 RPM to 700 RPM (Recommended) Concept: Single Gear (Spur) Construction: Jacketed / Non-Jacketed Cost Effective Extra Accessories Needed: Hot Oil Circulation Pump to Keep Pump Warm Inside (It Helps Bitumen Emulsion in Liquid Form, Otherwise Pump May Get Stuck) SPECIFICATIONS Rust Resistant because of high-quality material use Durable construction Manufactured by following the regulations framed in this domain Structure: Gear Pump (Pressure: Low Pressure) (Two-way & Three-way type) Easily Replaceable pumps APPLICATION Used at Asphalt Plants, Loading / Unloading of Bitumen Loading/Unloading of Crude Oils Specially Made for Bitumen Transfer at Road Plants

We are offering oil coolant pump. Features : available in very wide range. high flexibility of design. availability in any type of material like cast iron,ss-316,ss-304,bronze,alloy – 20 etc. balanced shaft & rotor with excellent grade stamping and wire so highly efficient motor . totally noiseless operation. available in any length and for any viscous clear liquid. extruded powder coated motor body (up to 1 hp ) . no shaft seal( 100 % maintenance free ). gears ( helical or bevel ) inside for smooth flow large stock, earliest delivery.

Oil Pump Assembly, pin cross head, Piston, Retaining Ring, road piston

Thermic Fluid Aircooled Pumps Genral       "SHUKAN PUMPS" series SAPP pumps are " Thermic Fluid Aircooled Process Pumps" is Horizonatal Single Stage Centrifugal Pump.Centerline Mounted and top Centerline Delivery Branch The Complete Pump Rotating Element Can be withdrawn towards the motor end without disturbing the suction or delivery pipelines,due to'BACK PULL OUT DESIGN.' Single stage,Excellent efficiency,maximum interchagability,Heavey Duty Construction. These pumps are designedso thatthere is no need to external cooling.Due to natural convection the pumptemprature decreases toward the bearing.End suction and Top Centerline Discharge Suitable for Thermic Fluid & Hot Oil also. confirming to DIN 24256/ISO 2858 standards and in general confirming to API 610 as well. 'Pump Impiller' closed Or Semi-Open Radial Impiller Specially Designed For Low NPSH Requirments. Hydralically Balanced by Back vanes, or in the case of large impeller diameters by balancing holes and wear ring on both sides.Reliable fixing of impeller on the shaft by impeller nut and positive locking of impeller nut by means of threaded insert.     Thermic Fluid Aircooled Pumps Applications       Oil Industries Petrochemicals Chemical Process Industries Process Industries Organic & Inorganic Liquids Refineries Fertilizer Plants Dyes & Intermediates Bulk Drugs And Pharmaceutical Effluent Treatment Plants Heating And Air Conditioning Plants Cooling Towers Sugar Plant Fire Fighting Water Supply Volatile Liquids Pulp And Paper , Textile Power , Steel Cement, Agriculture Fiber Jet Dyeing Thermic Fluid Hot Water etc... Oil Extraction And Waste Oil Refineries   Thermic Fluid Aircooled Pumps Operating Range         Capacity - Q- Up To 500 M3/Hr. TDH H - Up To 150 Mtr. Pump Sizes - DN 25 mm to 300 mm. Speed - N - 2900rpm /1450rpm Temperature 350° C         Thermic Fluid Aircooled Pumps Material of Construction           Graded Grey Cast Iron Carbon Steel ( WCB) Alloy Steel CF8M & CF8(SS-316,304)   SG IRON AND CAST STEEL CF3 CF3M(SS-316L) Alloy 20.etc.,           Thermic Fluid Aircooled Pumps Optional Accessories       M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

Available Sizes: 1½" & 2" Bitumen Pump.

We are offering oil transfer pump.our product range as follows : gear pump fluid pump oil transfer pump rotary gear pump we are manufacturing supplying the same since last several years.

fuel oil pumps, construction machinery spare parts

Oil Burner Pump, fuel injection internal gear pump, ldo pump, fig pump

Oil Pump, iron casting part

Oil Transfer Pump, AC Diesel Pump, In Line Flow Meter

Oil Seal Rotary Piston Vaccum Pump, Liquid Ring Vacuum Pumps

bitumen pump, Fuel Injection Internal Gear Pump Manufacturers

Hot Oil Circulating Pump, solvent pump, Hot Water Circulating Pump