Oil Pump Dealers in Ashram Road, Ahmedabad

• Max. capacity: 8 m3/h (36 GPM)
• Max. pressure: 7 bar (102 psi)
• Max. temp: 85 °C (185 °F)
• Max. viscosity: 6 000 mPas / cP

OptiFlo self-priming multipurpose pump with central flow Materials: PP, aluminium, stainless steel

• Size: 1/4X1/4, 3/8, 1/2, 3/4
• Warranty: 1 year
• Adaptor Sizes available: 1/4 x 1/4, 1/4 x 3/8, 1/4 x 1/2, 1/4 x 3/4

for bearing removal from the shaft. ‘sujay’ oil injector pump kit with oil reservoir , high pressure pipe , connection nipples with or w/o pressure gauge. pressure 3000/3500/4000 bar  

• Temperature Class Maximum Surface Temperature (°C) T1 450 T2 300 T3 200 T4 135 T5 100 T6 85: Temperature Class
• Maximum Surface Temperature (°C): T1
• 450: T2
• 300: T3
• 200: T4
• 135: T5
• 100: T6

Certification & Approval   • Certified by Central Mining Research Institute (CMRI), Dhanbad, Zharkhand for Gas Gr-I, IIA & IIB.• Approved by• Director General of Mines Safety (DGMS), Dhanbad, Zharkhand.• Chief Controllerate of Explosive (CCE), Nagpur.• Directorate General of Factory Advise Services and Labour Institute(DGFAS & LI), Bombay     Flameproof Environment   An Explosive atmosphere is one where mixture with air under atmospheric conditions of flammable substances in the form of gas, vapour or mist exist in such preparation that may explode due to excessive temperature, arc or sparks. Flameproof motors are manufactured with an enclosure constructed in such a manner that any explosion inside is not capable of lighting an explosive atmosphere outside the enclosure.   Zones   Hazardous areas have been classified into three zones as follows : Zone-0 in which an explosive air-gas mixture is continuously present or present for long periods.(N.B. - no. Motors may be used in Zone 0.). Zone 1 in which as explosive air-gas mixture is likely to occur in normal operation. Zone 2 in which as explosive air-gas mixture is not likely to occur in normal operation & if it occurs it will exist only for short time. By implication an area other than zone 0, 1 & 2 is deemed to be a non-hazardous or safe area. Temperature Considerations   Ignition TemperatureThe minimum temperature at which a gas, vapour, mist ignites spontaneously at atmospheric pressure is known as the Ignition Temperature. As the gases and vapour encountered in / industry have a wide spread of Ignition Temperatures, it has been agreed internationally to group together those which lie within certain temperature bond.

Jacketed type, heated with electrical heating tape, over-pressure relief valve.

The “ DEVPUMPS ” “ DEV ” ‘s RGP HGP -series foot mounted design gear pumps are ideal for handling of all types of Oils & Viscous liquids like All Fuel Oils like Light Diesel Oil ( LDO ), Furnace Oil ( FO ), LSHS, High Speed Diesel ( HSD ), Diesel , Mineral Oils, Lubricating Oils, Fish and Animal Oils, Vegetable Oils, Tar, Asphalts, Sugar Syrups, Molasses, Starch, Soaps, Silicate, Wood Pulp, Glycol, Glycerin, Honey, Inks, Colors & Paints, Resins, Kerosene, Varnishes and viscous chemicals etc. in all types of industries for intermittent duty.

• Type: Oil Pump
• Application: Industrial Use
• Weight: 1-5 Kgs
• Condition: New
• Pressure: Medium Pressure
• Warranty: 1year
• Brand Name: Kijeka
• Structure: Oil Pump
• Drive Type: Air Operate
• Pump MOC: Steel, Brass, Aluminium, Hi-Nitrile Rubber, Polyurethane Nylon
• Working Pressure: 2-10 BAR
• Air Consumption: 270 LPM
• Delivers: Up to 40 LPM
• Noise Level: 81 db

• Head: up to 10m (30 ft)
• Temperature: 60 - 70 degree
• Material: SS/MS/PP
• Country of Origin: Made in India
• Model Name/Number: Lube barrel pneumatic pumps
• Motor Horsepower: 0.5 hp
• Power Source: Electric
• Applications: barrel liquide transfer pump
• Maximum Discharge Flow: 100 lpm (max)
• Usage/Application: Industries
• Inlet X Outlet Sizes: outlet 3/4" BSP socket
• Tube Length: 700/1000/1250 mm
• Method Type: Liquid Handling
• Trademark: motorized Barrel pump
• Frequency: 50 HZ
• Voltage: 230 V
• Brand: HACOP
• Fluid Temperature: 60- 70 degree
• Speed: 15000 RPM

• Drive Motor Reqd H.P: 0.25

These are oil-immersed, rotary vane type pumps. The rotor, with two spring loaded vanes, is mounted eccentric in the stator body, As the rotor, rotates the vanes sweep the creascent shapes, air space twice in each revolution. There is in-built non-return valve which prevents back flow parts are precisely machined, ground and assembled with close tolerances. This result in increased efficiency and long trouble free operating life.

• Material: Cast Iron
• Finishing Type: Polished
• Packaging Type: Box
• Product code: BS-B6
• Usage: Refrigeration Compressor Spare parts
• Head Shape: Finish
• Brand: Sabroe

• Type: Diaphragm Vacuum Pumps
• Number Of Stages: Single stage
• Material: Cast Iron
• Brand: rocker
• Usage/Application: Industrial
• Mounting: Floor / Permanent

Centrifugal Type Filter Press Pump, acid pumps, Suction Centrifugal Pump

lubricating pump, Lubrication Pump, Automatic Force Lubrication System

Engine Oil Pumps, earth moving pumps

Oil Pumps, Automotive Oil, automotive pumps, Automotive Components

Oil Flooded Rotary Vane Vacuum Pump

speciality oils, Petroleum Products, Lubricants, Water, industrial wastes