Oil Pump Dealers in Kathwada, Ahmedabad

• Brand Name: Self Priming Oil Pumps

We offer self priming oil pumps. Our organization has gained recognition as the affluent manufacturer, exporter and supplier of a high quality range of ss self priming pumps. The offered pumps are manufactured using high grade raw material and contemporary technology. We assure our clients that our offered products are quality-tested on predefined parameters, in order to ensure their conformity with the international standards of quality. special features: all witted parts are made up of investment casting so smooth finishing surface with smooth flow pass and with castings defects like blow holes and cracks self priming pumps are with regenerative centripetal type impeller for good suction capacity. low nsph is required quick suction and no foot valves are required suction capacity is 8 meters. also available in bare and mono block pump: flame proof mono block are also available economic, efficient & easy in maintenance moc: ss-304ss316ss316l seal :different types of seal are available as per liquids ,normally pumps are fitted with silcon carbidesilicon carbide with teflon parts. trolley mouted is available: able to handle temperature up to 80 c. Pump as customer requirement are also available. application: all liquids without solid suspensions like clear and non abrasives liquids, solvents,diesel, dm water, light chemicals, petroleum products etc. water treatment plants washing equipments boosting pressure system as barrel pump

• Head Range: Up to 22 Meter
• Capacity Range: Up to 2000 Ipm
• Rating: 0.75 KW/1.5KW/2.2KW/3.2KW/5.5 KW (2 Pole)
• Supply Sysytem: 3 Ø - 415 Volts - 50 HZ-AC
• Insulation: Class B / F
• Protection: IP 55
• Enclosure: Totally Enclosed Oil Cooled (TEFC)
• Rotor Type: Squirrel Cage Rotor (SCR)
• Operational Duty: S1
• MOC: Grey Cast Iron, Bronze
• Custom Built Design: Motors with different supply voltage and supply frequency can be offered on request.

Features Single stage, end suction centrifugal pumps Main pump dimensions are compatible with DIN 24256 (ISO 2858) Single Entry, Closed Type impeller is used Radial vanes are used behind the impellers to lower the pressure and to balance the thrust (axial force.) The pump and the motor are connected by means of a flexible coupling on a common base plate. Maintenance of the pump is very easy. The shaft and other rotating parts can be removed without dismantling the suction and the discharge system. Since the pump uses many standard parts, spare parts are readily available. These pump are designed so that there is no need for external cooling. Due to natural convection the pump temperature decreases towards the roller bearing.

• Motor Speed: 2000 RPM
• Discharge: 150-200 LPH
• Maximum Pressure: 50-100 bar
• Frequency: 50Hz
• Voltage: 220V

The pump has a close solid metal body, cover and huge hole milling cut spur gears and my shaft. The pump two apparatuses having huge depression and its tooth profiles cut by exceptional sort cutter. Little which can use to draw a wide range of high gooey fluid with no inconvenience. These apparatus pumps are also accessible with jacketed for taking care of assortment of fluids.

• up to 180 m3/hr: up to 80 mtr.
• 32 mm to 80 mm: up to 350° c
• up to 3500 rpm: up to 8 kg/cm2
• With Air: Grey cast iron, CS, Alloy cast steel

In a Centrifugal pump‚ the procedure fluid enters through the suction spout and after that the focal point of direct known as the impeller. As the impeller rotates‚ it turns the fluid sitting in the pits between the vanes outward. Application Petrochemical industries Oil industries Synthetic-fiber industries Textile, dying, printing industries Plastic & rubber industries Paper making industries Timber making industries Sugar industries Food industries Construction industries Features Horizontal, single stage, single suction volute type, air-cooled centrifugal pumps with closed impeller pump shaft is supported by two heavy duty ball bearings, heat resistant mechanical seal, suction flange is on the front and axial, discharge flange is at top & radial. the below fields the pump are also proper in machinery manufacturing food processing medicine making and the circulation system for oil supplying of the hot oil boiler, the circulation system for the heating installation.

• Pumps Body -: Cast Iron (M.S. For Jacketed)
• Gears -: Cast Iron
• Bushes -: Gun Metal / Cast Iron.

bitumen pump are design for HIGH Viscous non-corrosive liquids. The pump has close cast iron body, cover & large cavity miling cut spurgears and ms shaft. The pump two gears having large cavity and its tooth profiles cut by special type cutter. Small which can use to pump all types of high viscous liquid without any trouble. These gear pumps are alse available with jacketed for handling tar,bitumen,asphalts,wax,soaps,etc.liquids The three port Tanker Gear pump or Fighter Gear pump are also available with us, which small is easily mounted on Tanker,Truck,Tractor or any mobile vehicles and work with their drive engine.The pumps are available with different size from 1.12" & 2" having capacity range up 400 LPM with different mounting arrangement. To obtain the longer life of pump, it is advisable to run pump at speed less than 290 ±10rpm.

Oil Seal Vacuum Pump We manufacture high vacuum pumps that are of oil-immersed, rotary vane type pumps. The rotor, with two spring loaded vanes, is mounted eccentric in the stator body, As the rotor, rotated the vanes sweep the crescent shape valve which prevents back flow of air. Manufactured from graded material, all moving parts are precisely machined, ground and assembled with close tolerances. This results in increased efficiency and long trouble free operating life. Capacity:-50 liters to 35000 liters Air admittance Valve: It is electromagnetic solenoid type which admits air into the system as soon as the power supply fails. This prevents back flow of oil to the the system. Air Ballast: This a vent pipe introducing air before actual compressions which eliminated condensation of the sucked vapor. There by avoiding contamination of oil. Non Return Valve: It is rubber diaphragm type spring loaded valve, which prevents back-flow of oil to the system as soon as pump stops. These can not be used to hold the vacuum in the system for longer period. Extra charge for : Moisture Trap Inlet Dust Filter Vacuum Gauge with Regulator Trolley for small Pumps Use oil: ENCLO-68 (H.P) SAE-30 or equivalent, vacuum Oil. Model LM-500 I and above, are provided with water cooling jacket. Applications: Dehydration and filtration processes.,Distillation,Exhausting Electronic Tubes, GLS Lamps, Mercury vapor,Lamps and Tubes,Vacuum Metallurgy,Vacuum sublimation,Vacuum impregnation,Thin film coating,Refrigerator and air conditioner servicing,reeze drying of foods.

THEORY : ROTARY HAND OPERATED POLYPROPYLENE PUMP,USAGE : ACID, ALKALI, GASOLINE, DIESEL, OIL, WATER, ALCOHOL, CHEMICALS,CAPACITY : 280 ML PER ROTATION

This design is used for industrial applications at coarse and fine vacuum. The increased ability of these smooth running pumps offers high efficiencies and silent running.Some specific Applications: Dehydration and filtration processes. Distillation Exhausting electronics tubes, GLS lamps, Mercury Vapour Lamps and tube Vacuum sublimation Vacuum impregnation Thin film coating Refrigerator and air-conditioner servicing. Freeze drying of foods.

• Brand Name: Reliable
• Application: Lubricating oils, fuels and all liquids which has lubrication properties
• Motor Horsepower: 1 HP
• Voltage: 220 V
• Electric Power V: 220 v
• Frequency Hertz: 50 Hz
• Features: Unidirectional flow designs, Very high suction lifts & low noise level, Pulsation free continuous flow, Compact & light weight, High volumetric & overall efficiency
• Material: Body-Cl, Lobe-Sintered Iron, Shaft-En-8, Bush-Sintered Bronze

• Pressure: 16 kg/cm2
• Capacity: 10 to 400 m3/hr
• Head: 5 to 100 mtr
• Discharge Size: Dn 32 to 100 mm
• Suction Flange: NB 40 to NB 125
• Temperature: 100 to 350oC
• Speed: 1500 to 3000 rpm

• Type: Oil Pump
• Application: Industrial Use
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Driven: Electric

• Brand Name: COMELY
• Condition: New
• Pressure: 0-10 KG
• Application: OIL TRANSFER
• Certification: ISO 9001:2008
• Type: Oil Transfer Pumps
• Warranty: 1 Year
• Country of Origin: India
• Size: 0.5" TO 3" INCH
• LPM: 1 T0 500 LPM

• Application: Industrial
• Power Source: Electric
• Max Flow Rate: 500 LPM

• Capacity: 10 to 400 m³/hr
• Temperature: 100 to 350°

Our thermal hot oil pumps are most suitable for food processing plants and industrial process applications where hot oil transfer required. Sujal Engineering serves his thermal hot oil pump to chemical and petrochemical industries also. Also provide 24-hour customer services including pump selection, installation, maintenance, repair and parts development.

World-class Industrial Oil Dispensing pumps with guaranteed performance & hassle free operation Pumps are designed to work in tough conditions & are ideal for use in Industry, workshop, farm , construction or as part of the Mobile Oil system All metal construction, fully CNC machined with hardened wear resistant moving parts Reciprocating piston operated 63 mm dia. Air Motor Pumps have a built in Strainer at inlet to keep contaminants away   Code No.DetailsBox Qty OP/T3/51B/BSP Pump Only for 210 Litre Drums Delivers: Upto 18 LPM 1 OPK/T3/51B/BSP Pump for 210 Litre Drums complete with 1.5 m Hydraulic Hose & Oil Control Gun (OGY) Delivers: Upto 18 LPM 1

We are engaged in manufacturing and supplying to our clients a wide range of Bitumen Pump. Application: Finds its application in the fields of bitumen, food, pharmaceutical; construction etc. Features: Sturdiness Easy to install Resistant against corrosion 

If you need to move Biogas slurry at a constant rate, the answer could be to use a positive displacement pump. This type of equipment is able to handle viscous Biogas fluids more efficiently than some other types of pump. The Progressing Cavity Pump can also deal with high dry matter content media (up to 10-12 %). With conventional rotary piston pumps this would not be possible (max. 9 % dry matter content). Despite the strong performance, the pump runs very quietly. We are very satisfied.”

• Brand Name: Leelam,Leelam Industries
• Phase: Single
• Country of Origin: Made in India
• Usage/Application: Industrial
• Pump Speed: 725 RPM
• Water Consumption: 4 Ltr/Min
• Suction capacity: 25 m3/hr
• Voltage: 220V
• Motor: 1 HP

• Power (H.P.): 0.5 HP - 10.0 HP
• Stage: 4 - 50
• Discharge Range (LPM): 15 LPM -520 LPM
• Head Range (Meters): 6 - 300 Mtrs

Product features    Available in radial Flow & Mixed Flow Impeller Design.  Light weight and easy to install.  Enhanced hydraulic design with improved efficiency and reduced power consumption  Noise free operation.  Modular construction and easily interchangeable parts.  Impellers and diffusers of high quality engineering polymer with 20% glass reinforced.  Stainless steel pump shell for corrosion resistance.  Incorporated with NRV with minimum friction.  Easily rewindable.  High quality water-resistant polymer insulated wires for longer life.     Applications   Industries Domestic Gardening Dairies Fountains Fire Fighting Systems Cooling water circulating system   Technical Data    

Asphalt Sprayer Pump We specialize in manufacturing and supplying a wide range of Asphalt Sprayer Pumps. These pumps are very popular amongst our clients for durability, longer serviceability, high efficiency, precision functioning and high strength. We offer these pumps at industry leading prices.

• Brand Name: APOLLO, ATLAS, SHITLA, ASHIRWAD, HIMALAYA, KESAR, KAUSHIK, KRISHNA
• Country of Origin: Made in India
• Max Flow Rate: 200 Ltrs.
• Model Name/Number: MDM25, DM35, DM45, DM50, DM60, DM65
• Material: Cast Iron
• Finishing: Colour Polished
• Power Source: Electric Motor
• Surface Treatment: Paint
• Fuel Used: Diesel
• Payment Terms: T/T (Bank Transfer)

• Brand Name: KSB
• Color: Silver
• Temperature Compensated: Upto 350 Degree C
• Features: Air cooled
• Capacity: 300 m3/hr
• Power Rating Single Phase: 3 Phase
• I Deal In: New Only

• Brand Name: Maruti
• Place of Origin: Gujarat, India
• Model Number: MEW MI LP

• Capacity: Up to 180 M3/hr
• Speed: Up to 3500 rpm

Horizontal, single stage, suction volute type, air-cooled centrifugal pumps with closed impeller, pump shaft is supported by two heavy duty ballbearings, heat resistant mechanical seal, suction flange is on the font and axial, discharge flange is at top and radial.The below fields the pump are also proper in machinery manufacturing, food processing medicine making and the circulatution system for oil suppliyng of the hot oil boiler, the circulation system for the heating installation.Petro-chemical industries, Oil industries, Textile, dyeing, printing industries.Plastic and rubber industries.Construction Industries.

GTFP Petrol-Chemical Industries Oil Industries Textile,dyeing,printing industrie Synthetic - fiber Industries Plastic and rubber Industries Paper marking Industries Timber preocessing Industries Suger Industries Food Industries. Construction Industries. Technical Data:- Capacity :up to 180 m3 /hr Head :up to 80 Mtr Discharge Size :32 mm to 80 mm Temperature :up to 350° C Speed :up to 3500 rpm Cooling Method :With Air M.O.C. :Grey Cast Iron, Cast Steel,Alloy Cast Steel .  

Application: To support core markets which are Oil and Gas, Textile, Ghemical, Paper and Sugar, Plastic, Pharmaceutical & Food, Plywood, Rubber, Water, and Industrial Applications. The JEC HTP Series Pump is a horizontal volute casing, single stage centrifugal pump. is manufactured in accordance with Din 24256 (ISO 2858) standard. Designed for thermic fluids and hot water process conditions, Sturdy discharge cover designed for high stiffness, Optimised heat barrier & low wear. Design variant with bearing for high resistance, Reinforced deep-groove ball bearing with special grease fill for long service life,optimised shaft contour ensures reliable removal of leakage, Highly effective venting contour ensures optimum venting, Confined gaskets, Design variant with mechanical seal in tandem arrangement, Anti-seize plain bearing lubricated by the fluid handled, Optimised hydraulic system yields high efficiency, Impeller trimmed to match the specified duty point, Suitable for variable-speed operation and equipped with motor standard, Easy to maintenance for it's back-pull-out design which allows the without needing any type of external air conditioning!