Oil Seal Vacuum Pump Dealers in Odhav, Ahmedabad

• Brand Name: Leelam,Leelam Industries
• Phase: Single
• Country of Origin: Made in India
• Usage/Application: Industrial
• Pump Speed: 725 RPM
• Water Consumption: 4 Ltr/Min
• Suction capacity: 25 m3/hr
• Voltage: 220V
• Motor: 1 HP

We manufacture high vacuum pumps that are of oil-immersed, rotary vane type pumps. The rotor, with two spring loaded vanes, is mounted eccentric in the stator body, As the rotor, rotated the vanes sweep the crescent shape valve which prevents back flow of air. Manufactured from graded material, all ...

• Material: Cast Iron
• Power: 0.25 To 10 Hp
• Phase: Single Phase
• Country of Origin: Made in India
• Brand Name: Rudraraj
• Automation Grade: Automatic
• Usage/Application: Industrial

• Power: 0.25 hp to 25 hp.
• Application: Re-refining of oil, lamp industries, forming coating, vaccum drying
• Max Vaccum: single stage 0.05 mm hg double stage 0.005 mm hg
• Capacity: 3 to 1200 m3/hr.
• Pump MOC: As per Requirement

Oil seal vacuum pump.

We manufacture high vacuum pumps that are of oil-immersed, rotary vane type pumps. The rotor, with two spring loaded vanes, is mounted eccentric in the stator body, As the rotor, rotated the vanes sweep the crescent shape valve which prevents back flow of air. Manufactured from graded material, all moving parts are precisely machined, ground and assembled with close tolerances. This results in increased efficiency and long trouble free operating life.Accessories : Air admittance Valve: It is electromagnetic solenoid type which admits air into the system as soon as the power supply fails. This prevents back flow of oil to the the system. Air Ballast: This a vent pipe introducing air before actual compressions which eliminated condensation of the sucked vapor. There by avoiding contamination of oil. Non Return Valve: It is rubber diaphragm type spring loaded valve, which prevents back-flow of oil to the system as soon as pump stops. These can not be used to hold the vacuum in the system for longer period. Extra charge for : Moisture Trap Inlet Dust Filter Vacuum Gauge with Regulator Trolley for small Pumps Use oil: ENCLO-68 (H.P) SAE-30 or equivalent, vacuum Oil. Model LM-500 I and above, are provided with water cooling jacket. Applications: Dehydration and filtration processes. Distillation Exhausting Electronic Tubes, GLS Lamps, Mercury vapor Lamps and Tubes Vacuum Metallurgy Vacuum sublimation Vacuum impregnation Thin film coating Refrigerator and air conditioner servicing Freeze drying of foods.

  General Information/Operating Principle: A balanced cylindrical rotor with hollow hub with series of curved blades running freely in eccentric casing. The sufficient sealing liquid, usually water, forms a solid ring on periphery of casing due to the centrifugal force. Since rotor is rotated in eccentric casing the blade creates working spaces whose volume increases as rotor rotates from lower to upper vertex and decreases as the rotor rotates from upper to lower vertex. The uniform distribution of working spaces on rotor periphery results in continuous suction and exhaust of gases.    Special Features:    » LOW ULTIMATE BLANK - OFF Down to 0.1 micron Hg. and less.  » HIGH EFFICIENCY - Even in the low Micron range.  » UNIFORMLY HIGH PUMPING SPEED - Throughout the broad range of 500 to 10 microns.  » RUGGED CONSTRUCTION - Designed and built for long, dependable service, even in severe applications, no special tools needed for maintenance.  » MINIMUM FLOOR SPACE - Unique modular design features compactness saves up to 50% of floor space required by conventional pumps.  » COMPLETELY PACKAGED - Including Separator Tank, Oil Level Indicator, Oil lubrication solenoide valve, Gas ballast, Common base plate, set of pulley, set of vee belt & motor slide rail etc.  » MINIMUM VIBRATION - Controlled balancing of the entire assembled unit reduces vibration to minimum.  » QUITE OPERATION - New valve design virtually eliminates valve maintenance and greatly reduces the noise usually present in high vacuum pumps.  » AUTOMATIC LUBRICATION SYSTEM - As soon as the pump starts, a solenoide valve takes over control of lubrication, providing proper flow of oil to sealing surfaces, When the pump is stopped, the valve prevents back flow of oil into the system. Operation is automatic with no hand valves to adjust.  » EFFICIENT OIL ENTRAINMENT - Exclusive built in entrainment separator substantially reduces oil carry-over and exhaust fumes minimizes oil losses and maintenance costs. Separator is completely integral with pump required no added space.  » PERFORMANCE ASSURED - Rigid quality control throughout production and complete final inspection including blank-off test and run in period are standard. This guarantees that the Oil Sealed High Vacuum Pumps you receive meets or surpasses all performance specifications.   Material of Construction:    » The Pump can be supplied in several materials to suit various applications, some of the materials of constructions are listed below.  » All graded Cast Iron with EN-8 steel shaft.  » Rotor and Control Plates in Bronze with Stainless Steel Shaft.  » All parts in Bronze with Stainless Steel Shaft.  » Rotor and Control Plates in Stainless Steel with Stainless Steel Shaft.  » All Stainless Steel constructions.  » Rubber lined Pump having casing, rotor, control plate and end cover in cast iron but rubber lined and shaft in Stainless Steel.  » Alloy - 20, Cast Alloys, Cast Steel   Applications:    » Chemical Processing: Vacuum Dehydration, Deaeration, Distillation, Vacuum Evaporation, Drying and Filteration.  » Food Processing: Vacuum sealing of bottles, Film Packing, Deaeration of Beverages, Freeze drying of Fruits, Vegetables.  » Agriculture: Vegetables Colling, Grain Drying, Fumigation.  » Petroleum & Petrochemicals: Vacuum Distillation and Refining Crude.  » Plastic: Vacuum Forming, Moulding and Coating of Plastic Materials.  » Textiles: Vacuum Drying, Dying, Material Handling and Solvent Extraction.  » Metallurgy: Vacuum Degassing, Purification, Melting, Heat Treating and Inpregnation.  » Laboratories: House Vacuum System, Chamber Evacuation, Research and Development.    

Oil Seal Vacuum Pump We manufacture high vacuum pumps that are of oil-immersed, rotary vane type pumps. The rotor, with two spring loaded vanes, is mounted eccentric in the stator body, As the rotor, rotated the vanes sweep the crescent shape valve which prevents back flow of air. Manufactured from graded material, all moving parts are precisely machined, ground and assembled with close tolerances. This results in increased efficiency and long trouble free operating life. Capacity:-50 liters to 35000 liters Air admittance Valve: It is electromagnetic solenoid type which admits air into the system as soon as the power supply fails. This prevents back flow of oil to the the system. Air Ballast: This a vent pipe introducing air before actual compressions which eliminated condensation of the sucked vapor. There by avoiding contamination of oil. Non Return Valve: It is rubber diaphragm type spring loaded valve, which prevents back-flow of oil to the system as soon as pump stops. These can not be used to hold the vacuum in the system for longer period. Extra charge for : Moisture Trap Inlet Dust Filter Vacuum Gauge with Regulator Trolley for small Pumps Use oil: ENCLO-68 (H.P) SAE-30 or equivalent, vacuum Oil. Model LM-500 I and above, are provided with water cooling jacket. Applications: Dehydration and filtration processes.,Distillation,Exhausting Electronic Tubes, GLS Lamps, Mercury vapor,Lamps and Tubes,Vacuum Metallurgy,Vacuum sublimation,Vacuum impregnation,Thin film coating,Refrigerator and air conditioner servicing,reeze drying of foods.

Oil-sealed rotary vane vacuum pumps, Bag Filter System, Line Erection Service

Oil Sealed Rotary High Vacuum Pumps, Monoblock Vacuum Pumps

Oil Sealed High Vacuum Pumps, Centrifugal Air Blower