Pharmaceutical Processing Equipment Dealers in Parimal Garden, Ahmedabad

Machine is a compact, elegant and matt (Dull). finished encompassed with stainless steel (SS 304). Viscous substance (1 ml to 3 ml). Accurately with the help of change parts. CIP SIP ready system.

• Brand Name: EIE
• Power Supply: AC 1 Phase 220V 60/50Hz
• Power: Electronic
• Application: concrete cube compression testing
• Port: Nhave Seva, Mumbai
• Accuracy: Class 1 (EN) and Class A (ASTM)
• Place of Origin: Gujarat, India
• Display: Touch screen graphical display
• Model Number: TM-042A
• Pace rate control: Fully automatic with servo motor, drive and servo valve
• Safety features: Piston travel limit, emergency stop button

• Working Volume: 7 kg (designed as per 0.5 Bulk Density)
• Gross Volume: 10 kg

SDC-DOUBLE CONE BLENDER – GMP is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as healthcare, food, chemical, cosmetics, detergents, fertilizers and plastics. Examples of materials or substances mixed in this way include pharmaceutical granules, semolina flour, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations to make dehydrated soups and creams, leaf waxes, detergent granules, soap flakes, artificial fertilizers, plastic in powder, ground or pellet form, fiberglass, etc.

The machine embodies an hydraulic system designed to meet the requirements of Indian standards Specification 516-1959 for compression tests on cement mortar cubes up to 7.06 cms. Loading Unit The hydraulic jack of 500 KN capacity is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centring pin. Loading is accomplished by upward movement of lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. Pumping Unit The motorised pumping unit which is housed in an elegant console is of double plunger type and is driven by three phase 440 volts 50 cycles electric motor. The pumping unit is a seperate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm dia, dial hydraulic pressure gauge with 250 division i.e. 0-500 KN X 2 KN. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an Angle for easy readability. The machine is fitted with hand wheel control which enables the rate of application of load to varied. The machine is equipped with the facility of Hand Pumping in case of power failure. The electric pumping unit is fixed with a micro-switch to switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of break down of power supply, the motor will stop and would not re start unless the starting switch is operated. Complete with our own calibration certificate for pressure gauge with National Traceability. Standard Accessories The Machine can be supplied with NCCBM Calibration certificate at an extra cost. The Machine can also be supplied with 2 or 3 pressure Gauges of 100 KN, 250 KN and 500 KN for testing lower strength cubes or smaller size cubes. Optionally, the machine can be supplied with digital load indicator and load cell in place of Pressure Gauge at an extra cost.Price on request only.

Kaiser Compression Moulding Press is Designed to make sheet for different type of testing ie. Tensile,Density etc.

The machine embodies an hydraulic system designed to meet the requirements of Indian standards Specification 516-1959 for compression tests on cement mortar cubes up to 7.06 cms. Loading Unit The hydraulic jack of 500 KN capacity is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centring pin. Loading is accomplished by upward movement of lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. Pumping Unit The motorised pumping unit which is housed in an elegant console is of double plunger type and is driven by three phase 440 volts 50 cycles electric motor. The pumping unit is a seperate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm dia, dial hydraulic pressure gauge with 250 division i.e. 0-500 KN X 2 KN. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an Angle for easy readability. The machine is fitted with hand wheel control which enables the rate of application of load to varied. The machine is equipped with the facility of Hand Pumping in case of power failure. The electric pumping unit is fixed with a micro-switch to switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of break down of power supply, the motor will stop and would not re start unless the starting switch is operated. Complete with our own calibration certificate for pressure gauge with National Traceability. Standard Accessories The Machine can be supplied with NCCBM Calibration certificate at an extra cost. The Machine can also be supplied with 2 or 3 pressure Gauges of 100 KN, 250 KN and 500 KN for testing lower strength cubes or smaller size cubes. Optionally, the machine can be supplied with digital load indicator and load cell in place of Pressure Gauge at an extra cost.

Compression Testing Machines (All Models) Analogue, Digital, Micro Processor Based and Automatic Compression Testing Machines (AIM 302 - AIM 320)   Concrete is a man-made material, essentially mixed at site. The properties of concrete depend on the properties of its ingredients and their proportion and it is likely to  vary from mix to mix. Tests must be conducted, therefore, to ensure that the concrete used is in accordance with design specifications. A frequent test, is the test of compressive strength, in which concrete samples are tested to failure. Compression Testing Machines : Aimil Series Compression Testing Machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible for even non- echnical personnel to operate them with ease and complete dependability. In particular, the portable units, which are small in dimensions, sturdy and light in weight, make quality control testing possible in areas where commercial testing facilities are not available and where the transportation of larger and much heavier machines would be difficult.Aimil Compression Testing Machines conform to IS: 14858(2000) and calibrated with an accuracy of ± 1% as per the requirement of 1828(Class1) . It can also be supplied as per BS : 1881 and other associated International Standards. These machines are available in 50kN, 100kN, 500kN, 1000kN, 2000kN, 3000kN & 5000kN Capacities. Compression Testing Machines Classification : Analogue models. Digital models with pace rate indicators. Micro Controller based models with automatic pace rate controllers. Fully Automatic models. Salient Features of Compression Testing Machines are : High stability. Self-aligning platen assembly. Load Gauges are calibrated in kN against certified Proving Rings, traceable to NPL / NCCBM. Suitable for testing cubes and cylinders of various sizes. Using special platens, bricks can also be tested. Logged data printing facility through a parallel port interface available in digital and micro controller ased versions. Calibration process accreditated by NABL (National ccreditation Board for Laboratories). Machines with CE mark also available, on special equest. Operator’s safety features like metal door with a erspex window and overload tripping device are  provided in all models. Application Compressive Strength Measurement Industry Civil Infrastructure Cement/RMC Construction Chemicals Dams & Tunnels Fly Ash Irrigation Railways Sleepers Real Estate Refractories Roads, Highways & Bridges Education Architecture Building Technology Civil Department Geotechnical Science Colleges Metal & Material Tiles & Ceramics Special Applications Fly Ash Traffic & Transportation Railways Roads, Highways & Bridges

Stainless Steel Pharma Scoops, mini marker, Starch Paste Kettle

We are providing our precious patrons a precision-engineered Double Cone Blender. Known for its anti-corrosive properties, it has fetched high demands in the market. Offered blenders are ideal to be used for the purpose of mixing dry powder and granules homogeneously.

We are offering vibro separator.grain, spices & pulses cleaning machinery.