PINCH VALVE INDIA Shahpur, Ahmedabad, Gujarat

Pneumatic actuator pinch valves are operated by translating an air signal into the valve stem motion by this air pressure acting on a piston connected to the stem. The pneumatic actuator pinch valves are fast acting and that is why offer fast opening and closing of the pinch valve. We have provided quick exhaust valve in the pneumatic actuator pinch valve to shorten the cycle time and enhance the speed of open close operation. Best feature of Pneumatic actuator pinch valve: Pinch valve embedded with vigorous and versatile pneumatic actuators offers robust structure Other Features: Face to face standard Whole body is rust proof: interior and exterior Fusion bonded epoxy coating for protections of steel valve Inline and quick tube change reduce the dropping time patented tube folds offer high durability

Material : NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM

In the open body pinch valve the valve actuator operates the stem and disc to perform an opening and closing of the valve. The open body is made of the carbon steel or stainless steel based upon the customer’s requirement. In open body pinch valve the rubber liner is placed between two halves of the metal flange at the time of the assembly process and the two these two halves are connected with the top and bottom supports. The top support is threaded where the hand-wheel stem is fitted. The open design offers light weight, easy operation and easy inspection of the pinch valve best suited for the non hazardous media only. Operation of the open body pinch valve: The desired operation can be achieved by turning the hand wheel clockwise to close the valve, whereas to the opening of the gate valve can be achieved by turning the hand wheel in the counter clockwise direction. Best feature of the open body pinch valve: Our open body pinch valve sleeve is made of pure gum rubber with reinforced polyester fabric offers high durability and long life. Other Features: Tight shut off on solids prevents leakage positive pull opening tabs executed smoothly clearly visible valve position offers easy watch Full port area offers minimal resistance to the media Full port area prevents pressure drop Available at very low cost required very low maintenance

Material : NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM

Hydraulic actuator pinch valves are operated using fluid pressure to provide automatic and semi automatic positioning of the valve. In the Hydraulic actuator pinch valve Manufacturer the spring is equipped into the Pinch Valve Exporter facilitate to hold the valve in the closed position when there is no fluid pressure applied. When the fluid enters and the hydraulic force of the fluid reaches higher than the spring force, the piston changes the position to upward and the valve opens. For the closing operation of the valve the fluid fed into any side of the piston whereas the other side is drained to accomplish closing. Best feature of Hydraulic actuator pinch valve: Small size offers the best usability at the tight spaces Other Features: Whole body is rust proof: interior and exterior Fusion bonded epoxy coating for protections of steel valve Inline and quick tube change reduce the dropping time patented tube folds offer high durability Face to face standard

Material : NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM

The enclosed body pinch valve design appears similar to the open body pinch valve. In addition, the most flow through and closure mechanism is similar to the open body pinch valve. The difference in the enclosed body pinch valve is the liner with the protective case and the enclosed body for compressor. The core benefit of the enclosed design is, you can use outer side fluid or pressure to keep liner open or closed. In Enclosed body pinch valve conventional wheel and screw pinching device is equipped into the system which facilitates to control the any media flow. The Enclosed body pinch valve is best executed with hydraulic or pneumatic pressure of the fluid or gas within the metallic body which facilitates in forcing the sleeve walls together to perform an open and close operation. Operation of enclosed body pinch valve: The desired operation can be achieved by turning the hand wheel clockwise to close the valve, whereas to opening of the gate valve can be achieved by turning the hand wheel in the counter clockwise direction. Best features of enclosed body pinch valve: Our open body pinch valve sleeve is made of pure gum rubber with reinforced polyester fabric offers high durability and long life. Automatic operation can be achieved using 8” sleeve or larger sleeve with bevel gear. Easy to operate at high pressure Other features: Rough carbon steel body offers rust free valve lubricated stem and bearing pad for smooth operation Port sleeve to throttle the flow Guide rods are made of stainless steel double wall sleeves for severe applications Available at very low cost required very low maintenance

Material : NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM

In electric actuator pinch valve, electric motor is used to permit the manual, semi automatic and automatic operation of the pinch valve. The motor that we have used in the electric actuator pinch valve is reversible, which facilitate opening and closing function in the pinch valve. There are two ways to operate the actuator in the pinch valve, either by the position of the valve or by the torque of the motor. We have provided the limit switch with the electric actuator pinch valve manufacturer to stop the motor at the complete close or complete open status. Best Feature of Electric actuator pinch valve: Easily configure with any type of electric actuator Other Features: Face to face standard Whole body is rust proof: interior and exterior Fusion bonded epoxy coating for protections of steel valve Inline and quick tube change reduce the dropping time Patented tube folds offer high durability

Material : NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM

The automatic pinch valves equipped with the actuators which do not require any manual operation to operate it. The stem and disc automatically opens and closes the pinch valve.There are various options in pinch valve actuators to operate it automatically, such as electric actuator pinch valves, Pneumatic actuator pinch valves as well as hydraulic actuator pinch valves, each actuator has a different operating mechanism which differentiates one to another.