Pinch Valve Dealers in Ahmedabad

• Country of Origin: India
• Material: Cast Iron
• Application: Gas Fitting
• Color: Sky Blue
• Feature: Corrosion Proof
• End Connection: Screwed
• Type: Pneumatic Pinch Valves
• Pressure: High

We offer best quality Pneumatic Pinch Valves that are considered to be the best option for various industrial applications. These Pneumatic Operated Pinch Valves allow smooth flow of liquid without harming its surface that makes them resistive to corrosion. Our company has gained accolades as one of the eminent Pneumatic Positioner Pinch Valves Suppliers.

• Body: Cast Iron & Aluminium
• Sleeve: NBR/VITON/FOOD GRADE
• Hanle STD Ends: Flanged to ANSI B 16.5/16.47 150#
• Hyd Body Test: 450 psig (32 kg /cm2)
• Hyd Seart Test: 315 Psig (22 kg/cm2
• Size: 80mm to 400mm

Pinch valve is suitable for corrosively liquors & slurries. The valves efficiently handles clear liquids or gases. when the valve is open, flow resistant is negligible. there is absolutely no possibility of chocking of pinch valves.

We are offering pinch valve, jupiter controls pinch valves are seat less and gland less valves. They have field replaceable elastomer sleeve, highly abrasive resistant due to elastomer sleeve and are 100 % leak tight. We make sure that our pinch valve maintained, easy to service and economical. The sleeve provide the valve lining, flange gaskets, and seating surface all in one. Pinch valves are best suited to handle highly corrosive slurry. When abrasive particles strike elastomer surfaces, the impact is absorbed and then deflected back into the particle; this resiliency allows elastomer surfaces to wear at a much slower rate than metals or even ceramic surfaces. We provide pinch valve with cam actuator, electric actuator, gear operated, manual pinch valve, pneumatic cylinder operated etc., pneumatic pinch valve, industrial pinch valve, manual pinch valve, corrosion resistant pinch valves, gear operated pinch valve, industrial open body pinch valve, jupiter pinch valve are reliable, maintenance free, cost-effective valves design for slurry, abrasive and corrosive –chemical application. There are no seats to grind and no stuffing box to repack and no packing gland to adjust, the heart of this unique pinch valve is the durable, flexible rubber sleeve which is reinforced with high-strength fabric. The sleeve, which is the only part of the valve exposed to the line process, eliminate maintenance and the need for expensive materials. Additionally, valve operation will not freeze, and operating torques remain constant. The design principle is very simple-two mechanical pinch bars open and close the elastomer sleeve. Because of its excellent control characteristics, the manual pinch valve can be used as a variable orifice. Few manual valves have this throttling advantage. Plus, zero leakage is maintained bi-directionally. A number of options are available, such as the pneumatic operated, gear operated, electrical actuated.

• Packaging Type: Sea worthy
• Valve Size: more than 30 inch
• Material: Cast iron / Ductile iron
• Color: blue
• Maximum Pressure: PN16
• Usage/Application: slurry substances
• Operation: Pneumatic cylinder operated
• Pressure: High Pressure
• Brand: 4Matic
• Model Name/Number: 4M-PNC

• Country of Origin: India
• Type: Pinch Valves
• Material: Stainless Steel
• Application: Water Fitting
• Temperature Pressure: High Temperature Pressure
• Finishing: Polished
• Specialities: Investment Casting, Heat Resistance

A pinch valve is a type of valve that controls the flow of a fluid or gas through a tube or pipe by using a flexible tube or sleeve that is pinched or compressed by a mechanism, such as a handwheel, lever, or pneumatic actuator. The tube or sleeve is made of a durable, elastic material, such as rubber or silicone, and is designed to withstand repeated pinching and releasing without wearing out.

Our complete range of product is wrapped in strong, nontoxic, and superior-grade packs that protect the contents inside from damage, moisture, logistic movement, etc. Furthermore, the packaging has product details printed on it. In order to settle the financial transaction with our clients through the transfer of monetary value, we offer diverse options including online and offline payment procedures.   Electrical Actuator Details: Manufactuator  - Cair Euromatic Automation Pvt.ltd. Brand / Model - Cair / Atm-in Characteristic - On-off Type With Integral Starter Unit Controller  Power Supply- 415v Ac, 50 Hz Housing & Cover- Cast Iron Enclosure     - Water Tight Ip 67 Ambient Temperature = -10°c ~ 50°c Torque Switches - 2 X Spdt Limit Switches - 2 X Spdt Stall Protection- Current Trip Provided With Starter Unit Indicator     - Continuous Position Indicator Manual Override - Provided   Integral Starter Unit Details: Selector Switch - Open / Stop / Close. Selector Switch - Auto / Manual Or Local/remote. Indicating Lamps - Open / Close / Error. Enclosure     - Ip 67 Weather Proof & Dust Proof. Blinking Led Lamp Indication During Open/close Operation. | Red - Fully Open | Green - Fully Closed. Automatic Phase Rotation Correction And Phase Loss Protection. 24v Dc Voltage Level Is Applied For Remote Control. Easy And Flexible User Connection Way. Non-penetrate Local Control Switch With Hall Effect Device To Improve Water Proof Feature. Five Passive Contacts To Indicate The Working Status Of The Electric Actuator And Facilitating The Monitoring Of The Electric Actuator By Dcs System. Operating Mode Select Switch Can Be Locked With Ordinary Lock To Prevent Improper Operation.   Details Size - 2” to 12” MOC - CI/ WCB / CF8 / CF8M Sleeve - NBR / EPDM Pressure - Upto 10kg / Cm² Temp. - Upto 80°C / 220°C Ends - Flanged Type

Our products are the best in the industry, as they are specially manufactured as per international and national quality managements standards. Our organization is a famed one that is located in Ahmedabad(India) and has a well-developed network for reaching different Ahmedabad(India)s.

• Material: NR, PGR, EPDM, NBR, IIR, CR, FPM, CSM,Ductile iron (CRN available) or aluminum
• Body Type: Open
• Available size: 1″ (25mm) to 60″ (1500mm)
• Standard Face-to-Face: ASME B-16.10, DIN 3202, ISO 5732
• Temperature: -50deg F to 250deg F
• Actuator options: Manual self-lubricating hand wheel embedded with gear reducer (optional)
• In-Line Tube Change: Yes
• Wear Sensor: Yes, option available
• Max. Working: Pressure Up to 300psi (20bar) (consult for higher pressures)

In the open body pinch valve the valve actuator operates the stem and disc to perform an opening and closing of the valve. The open body is made of the carbon steel or stainless steel based upon the customer’s requirement. In open body pinch valve the rubber liner is placed between two halves of the metal flange at the time of the assembly process and the two these two halves are connected with the top and bottom supports. The top support is threaded where the hand-wheel stem is fitted. The open design offers light weight, easy operation and easy inspection of the pinch valve best suited for the non hazardous media only. Operation of the open body pinch valve: The desired operation can be achieved by turning the hand wheel clockwise to close the valve, whereas to the opening of the gate valve can be achieved by turning the hand wheel in the counter clockwise direction. Best feature of the open body pinch valve: Our open body pinch valve sleeve is made of pure gum rubber with reinforced polyester fabric offers high durability and long life. Other Features: Tight shut off on solids prevents leakage positive pull opening tabs executed smoothly clearly visible valve position offers easy watch Full port area offers minimal resistance to the media Full port area prevents pressure drop Available at very low cost required very low maintenance

AMTECH offers -Alluminium Body / Cast Iron/ Cast Steel/ Stainless steel Pinch valves With Rubber Sleeves are extra double heavy with full covering flanges preventing corrosion on body and four reinforced pulling lugs for positive operation. The sleeve is internally completely reinforced located. The sleeve is internally completely reinforced, Which with stand against continuous operation. The sleeve is such designed that it will retain complete roundness in full open position giving full flow of pipe line.Valves are fullway-seatless & glandless, Heavy duty replacable Elastomer sleeve. Four reinforced pulling lugs prevents sleeves from collapse even in vacuum full covered flanges protects from corrosion effects. Can be drilled to DIN, BS 10, IS or any.The Valves are of complete sturdy construction to handle various abrasive & Corrosive Liquide. Pinch valves are used in applications liked Chemicals,Alkaline Mixtures,Acids, Slurries & intermediates, Liquid Foods, Viscous fluids, Sludges, Gramles,Dry Suspension,Powder Collectors,Gases,Pulps,Vacuum,Sewage Plants,Thermal Power Stations Water Containing Ash,Pharmaceuticals – Picklings,Textiles Industry,Mining & Cement Industry,Acid & Chemical Tankers,Refineries,Fertilizers,glass industries and many more process lines. Salient Features : Straight Full Flow. No Liquid hammering,it Can withstand 8 Kg/ cm working pressure,Utility in vacuum upto moderate pressures, Perfect Sealing even on Untrapped solids, Can handle most corrosive and abrasive materials,Built in Flange Gaskets,Only replacable part- rubber sleeve,Split casting ensure quick maintenance of the valve Heavy duty Graded Cast Iron / Alluminium Alloy. Amtech pinch valve design has three main components: the sleeve, the body and the actuator (manual, pneumatic, hydraulic and electric). The construction and materials of these components can be tailored to suit your process conditions.Size range: standard range from 25 mm to 1.000 mm,Temperatures: -50°C to +160°C,Operating pressures: vacuum to 10 barIn the open position, valves are at full bore with no flow restrictions. During closing, two pinch bars squeeze the sleeve shut on the centerline.   Specification  

Beena Engineering Works has become the leading manufacturer of the close body pinch valve of various dimensions and specification. The size of the valve varies as per the requirement. We offer a wide range of close body valve that can be selected by the client depending on the location and application where the pinch valve is to be used. Our great workforce enables us to offer this huge range. Each of the employee is highly skilled and trained so that makes us able to provide the best pinch valve that have closed body. These valves are glandless so it allows them to be used in various industries and locations. With help from highly knowledgeable experts, we are engaged in offering huge range of Close Body and chain operated Pinch Valves manufacturer to our respected customers at their budgeted prices. Beena Engineering series of pinch valves are uniquely manufactured and appropriate to control slurries and other difficult fluids. These are seatless and glandless valves which find their usage in various industries. The close body pinch valve is a simple mean that allows manually controlling the flow of various kinds of fluids. The pinch valve is made from high quality material that enables corrosive and chemicals to easily flow through it without damaging the valve. The sleeve is made from reinforced polyester fabric that gives it high strength and long life span. We provide them in different size and they can perform efficiently up to the range of 250°C temperature. Depending on the use of the closed body pinch valve the material of rubber is selected like silicon, butyle, viton, natura, etc. The pinch valves having closed body are available in the most competitive price range and are even customizable.   Features: Durable Non corrosive Simple operating Smooth working Leak proof Stability High temperature bearing capacity Handle high pressure Light weight

We are the leading Pinch Valve manufacturer in India. Our open body pinch valves are highly preferred in the market due to their significant features like excellent abrasion and corrosion resistance, high durability, Light weightiness, robust structure, easy installation and maintenance etc. We input only best quality raw-material for making the product. Our products are made with the aid of latest technology, in conformity to the international standards of quality. Hence they perform excellently and have a good working life. We offer them at market leading prices. We have been the principal Pinch Valves Exporter for almost two decades. Salient Features : Excellently resistant to abrasion and corrosion High durability Light weight Robust construction Easy installation Low maintenance High performance

We bring forth Open Body Pinch Valves that are high on demand for several industrial applications. They are designed and developed as per the requirement of the clients. Our open body pinch valves are endurable and long lasting in nature. Materials of Construction :- Cast iron or aluminum body Fabricated steel, open-frame designSleeves available in Pure Gum Rubber, Neoprene, Hypalon, Chlorobutyl, Buna-N, EPDM and VitonANSI class 125/150. Applications :- Lime ControlPolymer Feed SystemsGrit SystemspH AdditionLime Mud De-inkingAsh HandlingCoal HandlingBottom AshTitanium Dioxide Catalyst Feed Systems

An Air pinch valve is a pinch valve. Air or liquid pressure is inserted in the cavity of AIR PINCH VALVE - at the control inlet collapses the internal rubber sleeve to provide immediate and positive shut-off. The rubber sleeve closes completely, even on large particulate matter, abrasive and corrosive materials. When open, the sleeve allows full, unobstructed flow with little turbulence. Air pinch valve sleeves can be easily and economically replaced when they wear out. SIZES AVAILABLE SCREWED END 15, 25,40 & 50 MM FLANGE END 15, 25, 40, 50, 75 & 100MM SLEEVE AVAILABLE - NEOPRENE, NATURAL, HYPALONE, EPDM, VITON, SPECIAL ABRASSION RESISTANT PRESSURE UPTO 6 BAR POSITIVE OPERATION Air pinch valves give fast & positive shut-off of most industrial materials, liquids, and dry flowable materials. Air pinch™ pinch valves will close tightly on suspended particulate materials in liquids. Even highly viscous materials are no problem. Air pinch valves are versatile because of their unique flow-through design. It provides fast & smooth rapid operation, 100% full way, unobstructed flow, and complete close design. It can be mounted in any position or direction, & also works perfect even in fully submerged condition. ECONOMICAL DESIGN Air pinch valve housings are light weight and well suitable to use where heavy valves not required or won’t work. investment casting in wcb/cast steel, or investment casting cast stainless steel. No moving parts hence a sturdy long lasting valve at an economical fair price. PINCH VALVE OPERATION / OPERATION PRESSURES Operating pressures for controlled material vary depending on sleeve elastomer and valve size, and can range from a moderate vacuum (up to 26" Hg) to a maximum of 90 psi when controlling with air. Required control pressure is normally 20 to 40 psi greater than the material pressure. Use of excessive actuation pressure (air or liquid) than that which results in complete valve closure will impact sleeve life. Use of actuation pressure above 90 psi is not recommended.

We are dealing best Pinch Valves supplying company.

Owing to our enriched industrial experiences, we are devoted towards offering a wide variety of excellent quality Pinch Valve. The provided valve is exclusively manufactured using high grade raw material and the latest technology by our skillful professionals. The offered valve is highly appreciated by our clients owing to its sturdiness and easy-installation. Furthermore, this valve is duly checked against set quality parameters to offer a flawless range. Features: High strength Precise deign Perfect finish Other Details: Pinch valve having Neoprene Reinforced Sleeves are extra heavy with full covering flanges and four pulling Lugs For positive Operation Pinch valve are having outside pillar design Pinch valve are having special lock nut device on wheel for standard tightening in close position

Pinch Valve is a modified version of laboratory pinchcock. A rubber sleeve is protected under a cast iron casting. The fluid passing through does not come in contact with either body covering or any other metal parts of the valve except the sleeve. Hence, the body and other metal parts are almost permanently not subjected to the corrosive action of the fluid. The flow through the valve is straight and full as that of a pipeline, when the valve is fully open. Further, the collar of the sleeve eliminates gasket. The valve is simple hand wheel operated of rising wheel type. Therefore, the operation of the valve is just simple as other wheel operated valve. The in-between stoppage will allow the desired throttling. Thus, the valve offers positive control over flowing media.

• Size: 15MM TO 400MM

Pinch valves Seat Less & Glandless Easily Replacable Elastomeric Sleeve Elastomeric Sleeve Have Four Reinforced Pulling Lugs . Flanged Ends & Drilled To Din, Ansi, BS, IS, OR As Required COnstruction To Handle Abrasive Corrosive Media. Pinch Valve Is A Seat Less & Glandless Valve. The Fluid Passing Through Do Not Come In Contact With Either Body Covering Or Any Other Metal Parts Of The Valve Except The Sleeve.

Pinch valve is a Seatless and Glandless valve. Pinch valve is a modified version of laboratory pinch cock. A rubber sleeve/ rubber muff is protected under a cast iron casting. The fluid passing through do not come in contact with either body covering or any other metal parts of the valve except the rubber sleeve / rubber muff. Hence the body and other metal parts are almost permanently not subjected to the corrosive action of the fluid. The flow through the valve is straight and full as that of a pipeline, when the valve is fully open. Further, the collar of the sleeve eliminates gasket. The valve is simple hand wheel operated of rising wheel type. Therefore the operation of the valve is just simple as other wheel operated valve. The in-between stoppage will allow the desired throttling. Thus the valve offers positive control over flowing media and gives 100% shut off. Pneumatically operated Pinch valves are also available.  HEART OF THE VALVE : Rubber sleeves are available in Natural, Neoprene, Butyl, Hypolon, EPDM, SBR or blends to suit service. APPLICATION : Pinch valve finds its best application in handling effluent, sludge, corrosive slurry, abrasive media, liquid with solid suspensions and many others which are difficult to handle with seat valve. RANGE : The flange of the pinch valve can be supplied in accordance to BS, DIN, ASA & IS dimensions. The range for the valve is from 15 mm TO 300 mm, above 300mm can be manufactured on request. ACTUATION : The valve can be supplied with Electrical and pneumatic actuation also. 

Pinch valve is a Seat-less & Glandless valvePinch valve is a modified version of Iaboratory pinchcock. A rubber sleeve is protected under a body made from cast iron, aluminum casting. The sen/ice material / fluid passing through does not come in contact with either body covering or any other metal parts of the valve except the rubber sleeve / muff and hence the body and other metal parts are almost permanently not subjected to the corrosive action of the fluid. The flow through the valve is straight and full as that of a pipeline, when the valve is fully open. Further, the collar of the sleeve eliminates use of any gasket. The valve having simple rising spindle type operation makes the valve just simple as other wheel operated valve. The in-between stoppage will allow the desired throttling and Pinch valve thus offers positive control over flowing media.   Features :     Seat - less & glandless valves Field replaceable elastomer sleeve / muff Rubber sleeve / muff has four reinforced lugs Flanged ends & drilled to DN, ANSI, BS - 10, IS, etc. This valve incorporates all design modification based on our experience & is of sturdy construction & good quality finishing to handle abrasive and corrosive.

• Size range: Standard range from 25 mm( 1”) to 350mm(14”)
• Temperatures: 50°C to +160°C
• Operating pressures: Vacuum to 100 Psig

PURPOSE:-  JD pinch valves are ideal solutions where shut-off and control applications involve abrasive or corrosive slurries, muddy sediment, silty liquid powders or coarse substances. The number of design variations is virtually unlimited as the modular structure of a JD valve enables the selection of any actuator, valve body construction and sleeve material to fit specific process conditions.  OPERATING PRINCIPLES:-  JD Pinch valve is simple. In the open position, the valve is at full bore with no flow restrictions thus making the valve an integral part of the pipeline. During closing, two pinch bars squeeze the sleeve shut on the centerline. The JD valves provide a 100% tight shut-off. MODULAR DESIGN OF THE PINCH VALVE JD modular pinch valve design has three main components: the sleeve, the body and the actuator (manual, pneumatic, and electric). The sleeve is the only part that is in contact with the process medium. The construction and materials of all three main components can be tailored to suit most process conditions. Self-cleaning JD CONTROLS valves provide 100% tight shut-off even if solids have built up on the sleeve wall. When compressed, any crystallized particles flake off the sleeve surface and are washed downstream. JD pinch valves are particularly suitable for the process industry for shut-off and control applications.JDC provides pinch valves with open, sealed and general line valve bodies.   JD-PINCH VALVE OFFERS THE FOLLOWING BENEFITS: durability in demanding conditions Long service interval, low cost No blocks because of structure, reliability Can be tailored to the different needs TYPICAL USERS ARE: Mines and concentrator Wastewater processes Chemical industry The energy industry and power plants Pulp and paper mills Grain storage, loading, unloading (rubber sleeve for food) As a small manufacturer, we are agile and we can manufacture valves tailored to customer needs. The design, actuator, positioner, and sleeve are completely modifiable so you don´t have to make any compromises. The frame Can be galvanized and powder coated. Actuator: Pneumatic actuator controlled by magnetic valve or positioner from finish manufacturer Flange borings: Full size flange with flange borings, DIN or ANSI -standard. Frange borings have been galvanized and powder painted Sleeve: Is made of natural rubber with textile reinforcements. The sleeve is only part which is contact with the flowing material. Sleeve can be eaily changed. Press section: The positioner guides the press section of actuator into wanted position to control the flowing. Positioner/Magnetic valve: Controls the actuator. Magnetic valve opens or shut down the flowing. The place of positioner can be tailored.   Opening stripes: Have been attached in to press section. This secures that the sleeve will open in every situations.

• Material: Stainless Steel
• Packaging Type: Box
• Size: 15mm
• Brand: Vertex
• Usage/ Application: Industrial
• Surface Treatment: Galvanized

• Working Pressure: 10 kg./cm²

Pinch Valves can be the ideal solution for contaminated or viscous media. They have a lack of dead space that makes them suitable for applications in the food industry. Actuators are available as onoff versions or it is possible to have a control valve with analog or digital positioner. There is a special version available which is the endless tube Pinch Valve, in this valve the tube and valve are separated from one another for hygienic applications, so the valve is also suitable for very specific applications. Pinch Type Stop Valves have an onoff function and are ideal in applications where media is unsuitable to transport through a seat valve such as the food industry. C.I. Pinch valve having Neoprene Reinforced sleeves are extra heavy with full covering flanges and four pulling Lugs For positive Operation.

• Material: Cast Steel
• Size: 15 mm to 100 mm
• Pressure: Low Pressure
• Usage/Application: Water

Nilon - We take pleasure in introducing ourselves as a renowned exporters and supplier of a wide variety of pinch valve in India.

We are the chief manufacturer of Pinch Valve in Gujarat. These are distinctive kinds of valves meant for conducting the flow regulation operation by instigating pinching upshot. We offer diverse array of these valves like our Open body pinch valves, Close Body Pinch valves and pneumatically operated pinch valves. Our valves are known for offering zero leakage smooth functionality with no blocking issues. These have self-cleaning characteristic and are ideal for harsh working conditions. We manufacture them making use of supreme grade materials and components obtained from the most trust-worthy vendors of the market. These are made maintain the norms set by the industry applying the most modern technology. We offer them in different specifications and also conduct quality tests on them very austerely at our quality control department and supply only when they are confirmed for their quality. We offer them at very genuine prices too.

Pinch Valves, Electric Actuators, Butterfly Dampers, Plug Valves

Chemical Pinch Rubber Valve, Water Cool Condenser, Wirtgen Track Pad