Plasticizer Dealers in Ahmedabad

• Packaging Size: 250 Kg
• Application: Construction
• Packaging Type: HDPE Drum
• Shelf Life: 12 months when properly stored in dry places.
• Purity: 100.00%
• Quality: Good
• Use: Industrial
• Ph-value: 7-9
• Packing: 1 Ltr, 5 Ltr, 35 Ltr., 200 Ltr.

HYPOSIZER is a water reducing set retarding type of plasticising admixture for cement mortar/concrete as per IS : 9103-1999.Chemically it consist modified anionic lignosulfonate which is free from chloride and safe to handle. It improves the durability of plaster/concrete by promoting dispersion of fine cement particle in the mortar mix with reduced water/cement ratio.Use : It is most ideal for all type of plastering and mass concreting work carried out in hot climate. Ready mix concrete plant. Large volume RCC / PCC like Roads & Deck. Advantage Improve workability with low water/cement ratio. Reduces rebound loss during plaster. Mortar mix can be use for longer period. Due to retarding & humidity retention property it minimises formation of fine hair cracks on the plastered surface. Dosage : 100-200 ml of HYPOSIZER in a pre decided quantity of water needed for making mortar/concrete mix with 50 Kgs of Cement.HYPOSUPER SIZER is especially made for durable and high strength of concrete. It is based on blends of organic polymers and is of chloride free & non toxic. By its dispersing power it increases disintegration and hydration of cement particles very well, Which results in much more flowable and compact concrete with reduced water/cement ratio.Advantage High work ability with reduced water/cernent ratio. Compact, Homogenous and flowable concrete mix. Maintains high slump with lowest water bleeding. Can achieves high grade of concrete mix design. Easy de-shuttering with improved surface finishing. Water tightness of final concrete with low porosity. Very much suitable for precast and prestressed concrete products. Ideal for RCC of Beam, Column, Slabs, Tanks, Bridge, Dams and like other heavy duty concrete. Requirements 200 ml /bag of cement for medium duty concrete. 200 ml to 400 ml / bag of cement for high grade of concrete mix design. NOTE : Add pre-decided dose of HYPOSUPERSIZER with last bucket of water.

• Color: Dark Brown
• Chloride Content: Nil as per IS:456 BS-5075 Part 1
• pH: 7 to 9
• Specific Gravity: 1.20 + 0.02 @ 25 C

Dubond’s Duplast NP is a normal plasticizer , a ready-to-use, liquid admixture used for making more uniform and predictable quality concrete. Recommended from M 15 Grade of Concrete to M 25 grade of concrete.   Dubond's Duplast NP (Normal Plasticizer) is based on processed a Sulphonated Naphthalene Polymer based formulation and is supplied as a brown liquid. Generally cement particles tend to clump together and Duplast NP works by improving the dispersion of agglomerates within in the concrete mix which ensures that cement is used more efficiently. Duplast NP is low cost water reducer which can be used to get one or combination of benefits. It may be used with all types of OPC and high alumina cements.     Uses Light Weight concrete   Pervious Concrete Precast concrete Pumped concrete Ready-mixed concrete Rheodynamic Self Consolidating Concrete (SCC) Shotcrete ( Guiniting ) Advantage and Benefits   Better Compaction and Finishing by acting as Viscosity Modifier Breaks the Salinity of Water by converting them into Salt Crystals Chloride free   Easier Placing   Easier Placing Increases Extra Bonding Strength Increases Work ability Lower water requirement for given Work ability Lowers cement content for increase in specified Strength, Workability & Durability Reduce risk of Honey Combing   Reduce risk of Segregation and Bleeding Reduce risk of Shrinkage Cracks due to Heat of Hydration Reduces the risk of Rusting of reinforcement by breaking the chain of Rust Electrons   Typical Properties Duplast NP is formulated to meet ASTM - C – 494 / C - 494 M requirements. Water Reducing Admixture for concrete complies to BS – 5075 : 1982 Part 1 IS - 9103 : 1999 and ASTM - C - 494 Type A & D. Type A Water - Reducing Type B Retarding Type D Water - Reducing & Retarding Admixtures.   Direction for use Duplast NP is a ready-to-use liquid which is dispensed into the concrete together with the mixing water. The plasticising effect and water reduction are higher if the admixture is added to the damp concrete after 50% to 70% of the mixing water has been added. Dosage Duplast NP admixture is recommended for use at a dosage of 150ml to 250ml / 50 kg) of cementitious materials for Type A applications and up to 350 ml / 50 kg) for Type B and D requirements. Because of variations in atmospheric conditions, job conditions and concrete materials, dosages other than the recommended amounts may be required. In such cases, contact your local sales representative. The correct quantity of Duplast NP should be measured with recommended dispenser and should be thoroughly dispersed with approx. 25 % of the recommended water content (based on mix design by weight) Mix concrete constituents along with balance approx. 75 % of the recommended water content (based on mix design by weight) for 3 minutes. As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for 2-3 minutes to get a homogeneous mix.   Compatibility Duplast NP admixture may be used in combination with any Dubond admixture. When used in conjunction with other admixtures, each admixture must be dispensed separately into the mix. It is also compatible with slag and pozzolans such as fly ash, metakaolin and silica fume. Corrosivity Dubond Duplast NP(Normal Plasticizer) shall neither initiate nor promote corrosion of reinforcing steel in concrete. Safety precautions As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapour until product fully cured or dried)     Shelf LifeDuplast NP has a minimum shelf life of 6 to 12 months. Depending on storage conditions, the shelf life may be greater than stated below 40˚C. Please contact your local sales representative regarding suitability for use and dosage recommendations if the shelf life of Duplast NP admixture has been exceeded.    

• Color: Grey,White,Black
• Form: Power,Crystals,Granules
• Packaging Type: Plastic Bottles,Plastic Cans,Plastic Barrels,HDEP Bags
• Packaging Size: 0-5 kg,5-10 kg,10-15 kg,15-20 kg,20-25 kg
• Usage: Industrial,Construction,Laboratory,Commercial
• Grade: Technical Grade,Analytical Grade,Chemical Grade

These days, the industry of production widely gives their preference to PVC Plasticizers because they are most suitable for all different production requirements. They are useful for various situations and they have the capability of evolving on the requirement basis which makes it perfect for all industries. Basically, if we will define PVC then we can say that it is a substance that could be very useful when it is mixed with other materials. It is usually mixed with plastics which allow it to be perfect for production purpose because it gets the ability of being resilient, flexible and it also becomes very easy to handle. Professional PVC Plasticizers Supplier pay close attention to the quality of PVC and the quality of the material should also be very good which is being used in production. If we see the example of plasticisers then we can include water for the purpose of clay softening and oil for the purpose of obtaining plasticise pitch which was one of the most popular technique of waterproofing in ancient boats. Basically, PVC Plasticizers are hard and rigid when it is on the normal temperature of the environment. If you want to do the production of Plasticizers then the temperature should be higher because it will stay hard due to its nature of short distant molecules. There is a clear and very strong pulling force. There is a certain procedure of PVC Plasticizers production which cannot be completed efficiently without the use of best quality materials. This procedure is called plasticising and only best quality plasticizers for PVC can offer satisfactory formation of production material.  

• Brand Name: Duplast
• Application: A Bio Based Non Phthalate Primary Plasticizer For PVC Applications,Replaces DOP 100%
• Form: Liquid
• Packaging Size: 200kg
• Types: Phthalates
• Packaging Type: HDPE Drum and Truck Load

• Color: Brown
• Usage/Application: Industrial
• Packaging Type: Drum
• Chemical Composition: Sulfonated Melamine Formaldehyde (SMF)

Plasticizers, PVC Compound, Nitrile-Butadiene Rubber, Stearic Acid

epoxy plasticizers, butyl tin stabilizer, Calcium Zinc Stabilizer

epoxy plasticizers, PVC Stabilizers, Voltage Stabilizers

super plasticizers, Dispersing Agents, Paint Chemicals, Paper Chemicals

pvc plasticizers, Pvc Resin, PVC Compound Suppliers, PVC Additives Suppliers

epoxy plasticizers, Pvc Resin, Pet Resin, stabilisers, Metallic Stearates

Plasticizers, Epoxy Resins, mixing compound, Waterproofing Compounds

Plasticizer, Water Proofing Chemicals, Waterproof Coatings

Plasticizer, Construction Chemicals, Water Proofing Cementitious Coating

Plasticizer, industrial wax, poltethylene wax, hard microcrystalline wax

Liquid Mortar Plasticizer For Cement Sand Plaster

epoxy plasticizers, sulphonated naphthalene formaldehyde

super plasticisers, Concrete Admixtures, Dispersing Agent

Plasticizer, Plastic Raw Materials, Titanium Dioxide, Pvc Stabilizer, Lldpe