Plate Valves Dealers in Sp Ring Road, Ahmedabad

• Valve Size: 50mm to 600mm
• End Connection: Flange end, Wafer type, Lug type
• Pressure Rating: 150# - 600#; PN10 – PN100
• Flange Std: Flange End ASME B 16.5
• Pressure Class: 150# to 300#
• Sleeve: Nitrile Rubber / EPDM

We make available the products using the exceptional quality raw material that is experts certified. It is Supplier & Manufacturer of Dual Plate Check Valve. This makes our product range completely reliable and genuine. We have brilliant logistics network owing to which safe and timely deliveries are guaranteed with us. We offer a wide array of dual plate check valves designed with dimensional accuracy for east installation, use and maintenance. 

• Brand Name: Allines
• Pressure Rating: ANSI 125,150,250,300 & PN 25
• Feature: Low pressure drop hence lover energy loss,It weighs about 1/5th weight of conventional valve etc.
• Place of Origin: Ahmedabad  
• Applications: Water,Air,Oil,Gas,Steam or any other fluid
• Size Range: 2” (50 MM) to 24” (600 MM) N.B.
• Packaging: Bulk

Sand Casting Dual Plate Check Valve, offered by us, is widely appreciated for its superior quality, efficient functionality and durable life. Our Sand Casting Dual Plate Check Valve is hydraulically engineered by the experts in strong, light and small size. In addition to this, our Sand Casting Dual Plate Check Valve offers flexible installation in horizontal or vertical line without any special pipe support. Sand Casting Dual Plate Check Valve find application in water pipes, air pipes, gas pipes etc. Design Features : “Dual Plate Check Valve” is an all purpose Check Valve (NRV). The Valves are designed to API 594 and comply with API 598 Valves inspection & testing standard. This design has distinct advantages over conventional Swing Check Valve or any single disc design It weighs about 1/5th weight of conventional valve Salient valve – Water hammer & Slamming almost eliminated Low pressure drop hence lover energy loss Size range : - 2” (50 MM) to 24” (600 MM) N.B. Pressure rating : - ANSI 125,150,250,300 & PN 25 Constructions : Body & Plates : C.I./C.S./S.S./ALLOY STEEL/AL. Bronze to A-216 Gr. WCB, CF8, CF8M, LCB, B.S.1400 AB 2 OR any other alloy as per Buyer’s specifications Hinge & Stop Pin : Stainless Steel or Bayer’s specification Pin retainer : C.S./stainless steel or Bayer’s specification Springs : S.S.-304 / S.S. 316 / Inconnel Seal : Buna –N, Viton –A or metal to Metal End Facing : Plain Face, Raised Face or Ring Joint Facing Technical data : Dimensions as per API-594 expect for ANSI-125 series Hub diameter (A) can be supply to Suit Flange Sizes as per BS / ANSI / DIN/ JIS or any other standard as per Bayer’s Specifications The Valves are also available with Flanged Ends with Wafer Design as well as is long pattern having face to face Dimensions as per BS-1868 / API 6D / ANSI B-16.10 Applications : Water Air Oil Gas Steam or any other fluid

  STARTEK Single Plate Wafer Check Valves conform to API 6D-ISO 14313/API 594/API Pressure Ratings to ASME B 16.34 class 150(PN 20) through 2500(PN 420) and API Pressure class 2000PSI through 10000 PSI and class 125,PN10 through PN40 Single Plate Wafer Type Design suitable for mounting between flanges. One piece body cofiguaration provides reduced weight and size.this results savings in initial cost.space and pipe support element installation Extremely low crack opening pressure Low pressure drop Efficient flow characteristics Lapped body / disc seats No fugitive emissions   Option Short pattern and long pattern Closure assisted by spring loading Soft seat

• Pressure Rating: ASME- 150#, 300#, 600#
• Size Range: 50 NB through 900 NB

The dual plate check valves are the ideal protection for the pump and drive motors. It helps to discharge medium to maintain the system pressure. According to the application, we offer various options of size, shape, material of construction, and configuration to perfectly match the requirement.

Size:2"-48" Class:150#-1500# Material:Carbon steel;Stainless steel;Duplex steel;Bronze;Inconel Medium:Oil;Gas;Water Design&Manufacture to API594 Face to face to ANSI B16.10 Ends to ANSI B16.5

By keeping track with the latest market developments and desires of our revered clients, we are occupied in offering Single Plate Check Valve. Offered check valve is tested in terms of quality by our experts in order to dispatch a faultless range. This check valve is manufactured using excellent class material and cutting edge technology at par with set standards of industry.

• Material: Cast Iron
• Brand: Honeywell
• Nominal pressure: PN16
• Size: DN50-DN300
• Seal Test pressure: 17 bar
• Shell Test pressure: 24 bar
• Features: Dimensional accuracy, Rust proof, Durable finish standard

• SIZE: 2" TO 20"
• CLASS: 150# / 300# / 400# / 600#
• END: WAFER TYPE / FLANGED
• STANDARD: API 6D / API 594
• FIRE SAFE: API 6FD
• MOC: WCB / CF 8 / CF 8M / CF3 / CF 3M / CN 7M
• OPERATION: NON RETURN VALVE

• Design Standard: API 594
• Size Range: 2" to 8"
• Rating: ANSI # 125
• End Conncection: Wafer Type
• Sheet: Nitrile / EPDM / Vition
• M.O.C.: Cast Iron to IS 210 GR. FG 200 / Cast Carbon Steel ASTM A 216 GR. WCB

• Part Name: : Material
• Body: : GG 25/ GGG 40/ A 126 WCB/ A 351 CF 8/ CF 8M
• Closure: : A 217 CA 15/ A 351 CF 8/ CF 8M/ B 62 (85/5/5/5)
• Stop Pin: : AISI 304/ AISI 316
• Hing Pin: : AISI 304/ AISI 316
• Spring: : Stainless Steel 316
• Retainer: : Stainless Steel 316
• Seat: : EPDM
• Plate Lug Bearing: : SS 304/ Brass
• Spring Bearing: : SS 304
• Sleeve: : Nitrile Rubber / EPDM

• End Connection: FITTED BETWEEN TWO FLANGES
• BODY & DISC MATERIAL: CAST IRON, CARBON STEEL
• SEAT MATERIAL: METAL SEATED, SOFT SEATED.
• DESIGN: DISC TYPE - DUAL PLATE CHECK VALVE.
• PRESSURE RATING CLASS: ASA 125, 150, 300
• SIZE RANGE: 50mm TO 1000mm

• Material: WCB
• Brand Name: ELITE
• Valve Size: 2
• Usage/Application: Industrial

• Pressure Rating: ASME- 150#, 300#, 600#
• End Connection: Sandwich/ Flanged
• Size Range: 50 NB through 900 NB
• Type: Dual Disc Fully Rubber Lined/ Unlined Body
• Operation: Automatic with Return Pessure
• Port Opening: Full
• Seat: Soft - Rubber/ Metal to Metal
• Disc: Dual Disc Spring Loaded
• Gasket & Packing: Graphite/ PTFE
• MOC: Refer Material Chart
• Design Code: API - 594
• Testing: API - 598
• Inspection: 3rd Party/ Client/ Manufacturer

• End Connection: Wafer, Lugged, Flanged
• Body: ASTM A216 Gr.WCB, ASTM A217 Gr.CA15,ASTM A351 Gr.CF8,ASTM A351 Gr.CF8M,CF3M
• Disc: ASTM A216 Gr.WCB, ASTM A217 Gr.CA15,ASTM A351 Gr.CF8,ASTM A351 Gr.CF8M,CF3M
• Size: 25 mm to 500 mm
• Seat: Metal to Metal

FFV Dual Plate Check Valves should be installed in horizontal flow with pins Vertical for best performance with Wafer Design, Intigral soft seated with spring action.   Features Up to 75% lighter and significantly smaller than a comparable ANSI or API flanges Close piping and hook-up arrangements with typically 25% smaller Clamp diameter Easier fabrication and installation with no bolt holes to align Typically 40% shorter connection lengths Only 4 bolts to tighten rather than up to 24 on a conventional flange The clamp can be rotated completely round the hub for easy bolt Orientation and tightening Quicker and easier assembly and disassembly,minimizing Maintenance downtime   Applications Petrochemical,Industrial Piping,Power Generation,Onshore,Offshore & subsea pipeline application,Oil and Gas Production.

PVC Solid Ball Valve Long Handle MS Plate 2, 3 Piece Flanged Ball Valve

Dual Plate Check Valve, Strainer, Dual Plate Check Valve

Non Return Valve Single Plate, Double Gland Pulp Valve, GLOBE VALVE

• Brand Name: NIVZ
• Material: CS, SS
• Application: ANY
• Port Size: FULL
• Model Number: DPCV15
• Place of Origin: INDIA
• Power: SELF
• Pressure: HIGH
• Temperature Of Media: HIGH

Dual plate type check valve manufacturer, double disc, flap, door type check valve - nrv, wafer - lug type - flanged end check valve, non return valve, spring loaded dual flap check valve exporter, suppliers, stockist, importer spring loaded double door - flap dual plate - disc non return valve - check valve dual plate type check valve – non return valve - nrv double door type check valve – non return valve - nrv dual flap type check valve – non return valve - nrv double flap type check valve – non return valve - nrv inconel x 750 spring loaded dual plate check valve – non return valve - nrv wafer type non slam spring loaded check valve – non return valve - nrv spring loaded double door type wafer check valve – non return valve – nrv lug type body double door dual plate type check valve – horizontal vertical nrv double flanged end dual plate double door type check valve – horizontal vertical nrv retainerless dual plate flap door type check valve with spring loaded, flangedwaferlug body metal to metal seated high temperature application dual plate check valve – non return valve - nrv soft rubber seated zero leakage dual plate type check valve non return valve - nrv single piece, heavy duty construction body of check valve: design confirms to as per api 594 api 6d standard retainerless dual plate check valve end connections: wafer – flangeless – sandwich pattern double flanged end full lug type design double door type non return valve pressure rating: class 125, class 150, class 300, pn6, pn10, pn16, pn25, pn40, spring loaded dual plate check valve manufacturing size range: dn5050mm2”two inch, dn6565mm2-12”two and half inch, dn8080mm3”three inch, dn100100mm4”four inch, dn125125mm5”five inch, dn150150mm6”six inch, dn200200mm8”eight inch, dn250250mm10”ten inch, dn300300mm12”.

Dual Plate Check Valve, Paper Lamination Plant, Boiler Accessories

Dual Plate Check Valve, Dual Plate Check Valve, Dual Plate Check Valve

Dual Plate Check Valve, Api Gate Valve, ball valve actuators

Dual Plate Check Valve, Strainers, pneumatic operated control valves

Pneumatic Knife Edge Gate Valve, single plate wafer check valve

Dual Plate Check Valve, gas, Knife Edge Gate Valve