Plug Valve Dealers in South Bopal, Ahmedabad

• Material: Ductile Iron
• Power: Hydraulic
• Size: 2 Inch
• Condition: Good
• Surface: Polished
• Pressure Rating: PN10-PN420

• ALL SS: CS

Plug valves are valves with cylindrical or conically-tapered "plugs" which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open. Plug valves are simple and often economical. When the plug is conically-tapered, the stemhandle is typically attached to the larger diameter end of the plug. Plug valves usually do not have bonnets but often have the end of the plug with the handle exposed or mostly exposed to the outside. In cases like that, there is usually not much of a stem. The stem and handle often come in one piece, often a simple, approximately L-shaped handle attached to the end of the plug. The other end of the plug is often exposed to the outside of the valve too, but with a mechanism which retains the plug in the body. The simplest and most common general type of plug valve is a 2-port valve, which has two positions, open to allow flow, and shut (closed) to stop flow. Ports are openings in the valve body through which fluid can enter or leave. The plug in this kind of valve has one passageway going through it. The ports are typically at opposite ends of the body; therefore, the plug is rotated a fourth of a full turn to change from open to shut positions. This makes this kind of plug valve a quarter-turn valve. There is often a mechanism limiting motion of the handle to a quarter turn, but not in glass stopcocks.

• Technics: Forged
• Handle Operated Sizes: 2”x1”, 2”x2” , 3” x 3”
• Gear Operated Sizes: 2”x2” , 3” x 3”
• Condition: Good
• Power: Hydraulic
• Finish: Coated
• Surface: Polished