Pneumatic Pumps Dealers in Odhav, Ahmedabad

Pu3:1 Air Operated pump, corrosion protected for use with water based fluids, such as Detergents, Windshield Fluids, Water etc. Wetted components are made out of Stainless Steel Pump is designed to work in corrosive environments, ideal for use in Car Washers, Garages, Workshops, Lube Trucks, Industry etc. Reciprocating piston operated 63 mm dia. Air Motor Pumps have a built in Stainless Steel Strainer at inlet to keep contaminants away mp Only for 210 Litre Drums Delivers: Upto 14 LPM

Sujal Engineering has manufactured the heavy duty Air Cooled Pumps for high-temperature applications. It is cost effective, heat transfer pump that features a shaft mounted a fan to provide air flow over the cooling fins of the pump. In air cooled pump isolated liquid is circulated through an air-cooled heat exchanger by an auxiliary impeller located on the rotor assembly. Our unique design allows the motor and bearing environment to be at a much lower temperature than the process fluid. Enabling the use of standard bearing and motor insulation significantly reducing both first and long terms operating. Air cooled pump designed by Sujal Engineering represent the highest quality and most effective air cooled industrial pump in the market. Air Cooled Pumps are used in following applications and industries: Construction Industries Plastic Industries Rubber Industries Paper and Pulp Industries Chemical Industries Petro-Chemical Industries Textile Industries Food Industries Sugar Industries Pharmaceutical Industries Salient Features:   Standard motor insulation and bearing Discharge flange is at top and radial Low maintenance Centerline supported casing Heat resistant mechanical seal

GTFP Petrol-Chemical Industries Oil Industries Textile,dyeing,printing industrie Synthetic - fiber Industries Plastic and rubber Industries Paper marking Industries Timber preocessing Industries Suger Industries Food Industries. Construction Industries. Technical Data:- Capacity :up to 180 m3 /hr Head :up to 80 Mtr Discharge Size :32 mm to 80 mm Temperature :up to 350° C Speed :up to 3500 rpm Cooling Method :With Air M.O.C. :Grey Cast Iron, Cast Steel,Alloy Cast Steel .  

• Capacity: Up to 180 M3/hr
• Speed: Up to 3500 rpm

Horizontal, single stage, suction volute type, air-cooled centrifugal pumps with closed impeller, pump shaft is supported by two heavy duty ballbearings, heat resistant mechanical seal, suction flange is on the font and axial, discharge flange is at top and radial.The below fields the pump are also proper in machinery manufacturing, food processing medicine making and the circulatution system for oil suppliyng of the hot oil boiler, the circulation system for the heating installation.Petro-chemical industries, Oil industries, Textile, dyeing, printing industries.Plastic and rubber industries.Construction Industries.

• Pressure: 10 KG/CM2
• Capacity: 900 LPMMaximum
• Connection Size: ½" to 3 Inch
• Material Of Construction: Polypropylene,PVDF,SS304,SS316, Aluminium
• Diaphram MOC: Neoprene,Sentropene, Teflon, Hypalon, EPDM
• NRV Ball MOC: Neoprene ,Viton ,Teflon
• Applications Used: Ink, colour, high viscous liquid, acids, low viscous liquid, abrasives, dyes, solvents Transfer

• Type: Air Operated Diaphragm Pump
• Certification: MSME
• Application: Acidic Material, Barrels, High Viscous Liquid, Slurry Transfer, Solvent Transfer
• Weight: 50-100kg
• Color: White
• Voltage: NA
• Condition: New
• Power: NA
• Driven Type: Air Operated
• Pressure: 0-10Bar
• Warranty: 1yr
• Pipe Size: 0.5Inch, 1.5Inch, 1Inch, 2Inch, 3Inch
• Automation Grade: Manual
• Flow Rating: 0-500LPM
• Brand Name: EVA
• Material: PP, PVDF , SS , ALUMINUM
• Application: INDUSTRIES

• Application: Grease Supply
• Weight: 100-150kg
• Pressure: 10-20Bar
• Warranty: 2yrs
• Pipe Size: 0.5Inch, 1.5Inch
• Flow Rating: 0-500LPM

Pneumatic Grease Pump that we offer is gaining high popularity due to its sturdy construction and longer functional life. We are enlisted among the reputed Manufacturers, Exporters and Suppliers of Pump. Manufactured under the proper guidance of experts, buying Pneumatic Grease Pump from us will be the safest option for the buyers. We have a well-equipped production unit that enables us to produce Pneumatic Grease Pump in bulk at a time.

• Application: Printing Machines
• Voltage: 110V, 220V, etc
• Driven Type: Electric
• Pressure: Medium
• Speed: 1400rpm, etc
• Features: Long functional life

• Type: Pneumatic Barrel Pump
• Color: Silver
• Condition: New
• Automatic Grade: AIR DRIVEN
• Driven Type: Pneumatic
• Pressure: 0-10bar
• Warranty: 1year
• Material: Stainless Steel
• Country of Origin: India
• Capacity: 40 LPM
• Discharge: 40 LPM
• Head: 15 MTRS.
• Operating Pressure: 2 to 6 BAR
• Temperature: 80
• Material of Construction: SS316

• up to 55 m3/hr: up to 70 mtr.
• up to 7 kg/cm2: Max 120° c
• 12 mm to 80 mm: 1/4" to 1/2"
• Max. 12 mm: SS316, SS304, PP, PVDVE, Aluminum, etc...

Air Operated Diaphragm Pumps have good suction lift characteristics and can handle sludge’s or slurries with a relatively high amount of grit and solid content. This pump can be mounted upright, sideways upside down & finds great application in car washers. Application Solvents Acids Caustics High Viscous Liquids Abrasive Media Hazardous & Flammable Liquids Barrel loading – unloading Filter press & transfer Slurry transfer

• Voltage: 240V
• Usage/Application: electroplating
• Frequency: 50/60Hz
• Power Source: Electric

We are the leading exporter and supplier of this products.

INDO-AIR Vacuum pump has a universal design with the feature to convert it to a single stage compressor. This feature is very useful for large tank leakage test under vacuum or under pressure. Dry type vacuum pump-only useful for handling of gases. Easy to install requiring, no foundation. Higher efficiency compared to other types or other makes of vacuum pumps. Low maintenance. Noise level under 80 DB, ideal for hospitals. While using liquid tanks in chemical plants for vacuum, the provision of scrubber tank is available as an additional equipment to prevent the liquid from entering the pump. Simple design makes it easy for any mechanic to dismantle and assemble the pump without any mismatch of the parts.

• Type: Air Cooled Heat Pump
• Application: Industrial
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year, 2years
• Driven: Electric

• Type: Air Compressor Pumps
• Application: Industrial Use
• Weight: 10-20kg, 20-300kg, 30-40kg
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 2hp, 3hp, 5hp, 7hp
• Power Source: Electric
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warranty: 1year

• Capacity -q: Up to 300 M3/hr
• Head: Up to 150 Mlc
• Pump Size - DN: 25 mm to 300 mm
• Speed - N: 1450 / 2900 rpm at 50 Hz & 3500 rpm at 60 H
• Temperature: Up to +350 C Max
• Warranty: 1 Year

Advantages : Standard Motor Insulation & Bearings Bearing Environment at Lower Temperatures Secondary Containment Eliminates The Concern Of Fouling Caused by Poor Water Quality Bearing Wear Monitors Available

We provide our customers highly efficient Air Compressor that are efficiently converts gas into kinetic energy. To meet the requirement of our customers, we offer Vertical Air Compressor, Air Filters & Oil Separators For Screw Compressor and Oil free Air Compressor. These are appreciated for consistent performance and low maintenance. Our clients can buy these machines at competitive prices. Our highly efficient is Grease Pumps are used for applying grease to the bearings and other moving parts. Made using high quality raw materials these pumps are acclaimed for longer functional life, high efficiency and low power consumption. Our clients can buy from us these grease pumps in various capacity and sizes.  

Air-cooled canned motor pumps designed for high-temperature applications isolate liquid in the motor section of the unit for the hot process fluid in the pump casing with a series of pressure ports located in the front bearing housing or pump casing adapter. This isolated liquid (usually the same fluid as the pumped fluid) is circulated through an air-cooled heat exchanger by an auxiliary impeller located on the rotor assembly.

• Brand Name: TOSS
• Material: POLY PROPYLENE AND SS-316
• Power Source: AIR OPERATED
• Model Name/Number: AODD-300
• Pump Type: DIAPHRAGM TYPE PUMP
• Motor Horsepower: --
• Max Flow Rate: 135 LPM
• Head: 15 METER
• Phase: --
• Minimum Order Quantity: 10 Number

• Type: Air Operated Pump
• Material: Iron.Metal.Copper, Stainless Steel
• Weight: 100kg, 200kg, 300kg, 500kg
• Color: Black, Grey, Light Green, Sky Blue
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Application: Industrial Use
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Pneumatic
• Feature: Durable, Easy To Fit, Premium Quality
• Warranty: 1Year, 2years

Air Operated Double Diaphragm Pumps, flexible impeller pumps

Air Cooled Heat Pump, Rotary Gear Pump, Pump Shaft, hot oil pumps

We are offering indo-air vacuum pump. Vacuum pump is an universal design with the feature to convert it to a single stage compressor. This feature is very useful for large tank leakage test under vacuum or under pressure. dry type vacuum pump-only useful for handling of gases easy to install requiring no foundation higher efficiency compared to other types or other makes of vacuum pumps low maintenance noise level under 80 db, ideal for hospitals while using liquid tanks in chemical plants for vacuum, the provision of scrubber tank is available as an additional equipment to prevent the liquid from entering the pump. simple design makes it easy for any shop mechanic t o dismantle and assemble the pump without any mismatch of the parts.

air ejector, Spring Plunger, Taper Interlock Bolts, Parting Lock

homes hydro pneumatic pumps, Pressure Booster System

air ejector, High Speed Steel Punches, Flebile Coolent Pipes