Pneumatic Valve Dealers in Memco, Ahmedabad

PNEUMATIC VALVES: J D Automation series ball valve accepts an actuator or gear box can be bolt directly on the mounting pad (as per ISO 5211) of the valve body. No. extra brackets/couplers are required. The bottom of the actuator is rest on the mounting pad of the valve. There are no external moving parts. The coupler/adapter is less subject to corrosion. An external bracket does not exist to create surfaces that may be untrue. This design alleviates a number of problems mentioned above.   Automation Series Ball Valves known as Direct Mounting Pad Ball Valve, ISO Mounting Pad Ball Valve, ISO 5211 Direct Mounting Pad Ball Valve, Remote Operated Ball Valve, Pneumatic Operated Ball Valve, Actuator Operated Ball Valve, Fire Safe Ball Valve, Fire Safe Approved Ball Valve, API 607 Fire Safe Design Ball Valve, API 6D Ball Valve, Automatic Ball Valve, Electrical Operated Ball Valve ADVANTAGES OF JD DIRECT MOUNTING PAD VALVES FOR ACTUATOR & GEAR OPERATORS: International Standard                              :  Featuring an ISO 5211 Mounting Pad for direct mounting of Actuators and Gear Box on valve.Strength of mount between                      : No brackets that can bend after installation. valve/actuatorSafety                                                            : No pinch pointsCompactness                                               : Smaller/Shorter package takes up less space in pipe galley. Low Profile.Actuator/Valve Stem alignment            : Shorter distance between valve/actuator allows closer tolerance to minimize torque.Modular: Simplicity                                  : No confusion as to how bracket bolts to equipment’s or how to install adapter.Screwed End                                               : ANSI B 1.20.1(BSP/NPT)Lighter Weight                                          : Package no longer includes bracket and large adapter reduce weight.Direct valve stem/actuator connection :Less chance for hysterisis. One less connection with no adapter involved.Maintenance                                               : Often no packing to adjust. Less corrosion in the valve stems Area from atmosphere.Long Life Performance                            : Its offer long life, smooth, easy performance without any preservingStandard Feature                                     : Fire Safe Design, Antistatic Device & Blow-out Proof Stem. PNEUMATIC VALVE RANGE: ISO 5211 Pneumatic Valve, ISO 5211 Direct Mounting Pad Pneumatic Ball Valves, ISO Mounting Pad Pneumatic Ball Valve Manufacturer, Pneumatic Ball Valves Manufacturer, Exporter & Stockist

We are the leading exporter and supplier of this products.

• Country of Origin: India
• Material: Cast Iron
• Application: Gas Fitting
• Color: Sky Blue
• Feature: Corrosion Proof
• End Connection: Screwed
• Type: Pneumatic Pinch Valves
• Pressure: High

We offer best quality Pneumatic Pinch Valves that are considered to be the best option for various industrial applications. These Pneumatic Operated Pinch Valves allow smooth flow of liquid without harming its surface that makes them resistive to corrosion. Our company has gained accolades as one of the eminent Pneumatic Positioner Pinch Valves Suppliers.

• Size: 1.1/2inch, 1.1/4inch, 1/2inch
• Material: Metal
• Application: Gas Fitting, Oil Fitting
• Color: Blue
• Feature: Casting Approved, Durable
• Automatic Grade: Manual
• Pattern: Plain

• Country of Origin: India
• Material: Stainless Steel
• Automatic Grade: Automatic
• Valve Size: 2inch
• Finishing: Polished
• Usage/Application: Water
• Pressure: Low Pressure

• Country of Origin: INDIA
• Brand: ACCURATE
• Size: 15 MM

We make available the pneumatic y-type control valve also known as 2/2 way pneumatic operated 'y' type on/off control valve. The wide assortment of pneumatic y-type control valve manufactured at our unit is highly demanded by the clients situated across the globe. We ensure the pneumatic y-type control valve we export in the market are of outstanding quality and sophisticated technology is used in the production process.

• Size: DN15 to DN200
• Application: Steam, Thermic Oil, Water, Chemicals
• Rating: ASA 150# & ASA 300#
• Body Material: C.I.IS 210 Gr FG 200/ASTM A216 Gr WCB/ ASTM A 351 Gr CF8/CF8M
• Type: 2 way, 3 way
• Yoke: Cast Iron
• Bonnet: Standard Carbon Steel Fabricated. Extension Column & Radiation Fins for 3 way Valves
• End Connections: Flanged according to ASA 150# & ASA 300#
• Seat: S.S.304/316 Screw in Type
• Plug: S.S.304/316/410 ‘V’ Port Characteristics/Teflon Filled
• Shaft: SS.304/316 screwed in the Actuator Stem
• Sealing Type: Metal-to-Metal Seal/Soft Seal
• Packing Box: Preformed Rings in Graphoil Packings/Teflon Rings Combinations of Both
• Valve: Normally closed. Normally open on request
• Working Pressure: 10Kg/cre. 20Kg/cm²
• Maximum Temperature: 180°C for 2 way & 400°C for 3 way Valves
• Testing & Inspection: Standard
• Seat Leak Test: 12.5Kg/cm² for 150# & 25 Kg/cm2for 300#
• Body Hydraulic Test Pressure: 20Kg/cm2 for 150# & 25 Kg/cm² for 300#
• Valve Mounting: Horizontal
• Industries: Textiles, Plastics, Dairy, Pharmaceuticals, Food-Processing Petrochemicals, Lamination, Leather, Etc.

• Brand Name: Pentair
• Material: Plastic
• Size: 2 Inch
• Surface Finished: Polished
• Pack Type: Box

• Media: Compressed Air
• Type: 3/2 Way,5/2 Way & 5/3 Way Single / Double Solenoid Valve
• Size: 1/4" to 1/2"
• Seals: Nitrile
• Body: Aluminium Anodized
• Pressure: up to 10 Kg
• Temperature: Up to 60°C

FFV make 3/2 Way & 5/2 Way Single Coil / Double Coil Solenoid valves are commonly used in various sizes & variety of Pneumatic Actuator.Suitable for lubricated or non-lubricated supplies exchangeable solenoid for all.Used in application,including petrochemical,pulp and paper,filling equipment,food processing and water treatment.It has a high flow rate capacity and Large Internal Flow Area which Enables usage on a large range of actuators also.It has a Rapid response time (up to 4 cycles/sec) continuous duty cycle with reliable NBR Soft seal Spool.   Features High flow-rate capacity Reduced power consumption Moisture proof Epoxy Molded Coils For corrosion protection Aluminum Anodized Parts All Standard voltages available Long reliable working life

• Size: 16mm
• Actuator Type: Pneumatic Butterfly Valves
• Material: Mild Steel
• Features: Developed using advanced technology support to provide for superior performance and long functional life,
• Media: Water
• Brand: Ashok

We are manufacturing all types of solenoid valves for many purpose in all sizes and 6wt,12wt,24wt,230wt. Pressure from 0.5bars to 400bar. We also devlop special type solenoid for special design and special purpose.we also devlop solenoid valves as per your specification.

• Application: Air, Water, Oil, Gas, Steam & Hydraulic Oil
• Model: CHD & CLD
• Actuato: Spring return type, Heavy duty Pneumatic Diaphragm
• Type: Normally Close / Open
• Size Range: 1/2
• Body: WCB
• Diaphragm Cover: M.S. (Sheet Metal)
• Working Press: 150# / 300# / 600#
• Working Temp.: 450 °C & 220 °C
• Seating: Metal to Metal & Soft Seated

We are one of the efficient manufacturers and suppliers of Pneumatic Valve, used for various applications in Textile Mills, Sugar Mills, Food and Chemical Industries. These Valves are widely appreciated for durable finish standards, corrosion resistance and reliable performance.

• Material: Carbon Steeel, Metal, PP, PVC, Stainless Steel, UPVC
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Color: Black, Blue, Red, Sky Blue, White
• Automatic Grade: Automatic, Manual
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Number Of Way: 2way, 3way
• Type: Pneumatic Control Valves
• Pattern: Plain
• Pressure: High, Low, Medium

We are the main supplier of this product.

Our team of procuring agents is focused on sourcing optimum quality Textile Machinery Spare Parts for clients. Textile Weaving Machinery Spare Parts, We develop these spares to meet the specific requirements of our valued customers. Weaving spares parts that are used in weaving machinery. Textile Machine spares parts manufacturers, suppliers and exporter Textile Weaving Machinery Spare Parts, Solenoid Valves & Air Regulators.  

ADVANTAGES OF DIRECT MOUNT ACTUATOR OPERATED BALL VALVE: No need of bracket and coupler: Actuator can mount directly on ISO 5211 integral flange on valve body. ISO 5211 mounting pad is most reliable source for standard fitment. No vibration after long operating period: Even though long operating life, smooth and hassle free results can obtain by non use of bracket and coupler. Stem inserts directly in actuator without use of coupler or any jointing piece. Actuator will operate on actual torque: Stem inserts directly in slots of actuator gives 100 % positive engagements and operates valves on lower and constant operating torque throughout the entire cycle life. Easy to install or dismantling actuator: Actuator can be fitted on mounting flange directly by tightening of four bolts only. User friendly procedure can achieve during install or dismantling actuator on ball valves body. Increase production ration for fast delivery: This design removes unnecessary joints during automation of valves and increase productions with compact, reliable and more economical assemble unit.

Pneumatic Pinch Valve, Wafer Check Valves, lift check valves

industrial butterfly valve, Push Button Label, Aluminium Labels

Pneumatic Valves, Pneumatic Cylinders, Dryers, Pneumatic Accessories

Solenoid Valves, dental chair parts, Electrical Switches, three way syringes

Pneumatic Valve, Industrial Valve, Solenoid Valve, Transformer

Pneumatic Knife Edge Gate Valve, single plate wafer check valve

Pneumatic Valves, ibr industrial valves, non ibr industrial valves

Pneumatic Valves, Pneumatic Cylinders, Pressure Gauge, Temperature Gauge

Pneumatic Cylinder Pinch Valves, Mirror Finish Ball

pneumatic cylinder control valves, industrial control valves