Polypropylene Pumps Dealers in Ahmedabad

• Production Capacity: As per order

Long life, minimum maintenance and seamless performance; all these features are best justified in Axial Flow Pumps. The Propeller Pumps indeed rules the industry by the matchless corrosive and abrasive solutions offered by it. The vivid range of propellers AF Models are unrivalled. It is best designed to meet any and every possible high flow, low head pumping requirements Application : Transferring of Concentrated HCL From Road Tankers Filter Press for Dyes & Chemical Effluent Treatment Water Treatment Plants Pickling in Steel Rolling Mills Scrubbing of Corrosive Gases Like Ci , Br , F , So , So , Co ,NH .. Electro-Plating Descaling   Industries Where Used : Dyes and Chemicals Drugs & Pharmaceuticals Cushitic Soda Plants Thermal and Atomic Power Plants Fertilizer Plants Copper, Zinc, Smelter Steel Plants TiO Plants Rayon and Staple Fibre Plant (Bleach ) Paper & Pulp Industries

Sujal Engineering is a leading manufacturer of SPP Series – Known as Polypropylene Pumps. Our polypropylene pumps are designed especially for high corrosive chemicals where metal are not recommended or its cost is high. This pumps are centrifugal corrosion resistant with horizontal radially split one piece volute casing design fitted with semi open impeller single entry single stage for smooth running performance against corrosion according to the standards. In polypropylene pumps high alumina ceramic sleeve is used to protect shaft from any type of corrosion and abrasion. Mechanical seal prohibit the leakage from the pumps and best cast iron heavy duty oil lubricated bearing housing helps for achieving maximum strength of pumps. Salient Features: Low maintenance due to minimum components. Leak proof and also run dry without damage in rotating parts. Compact design   Polypropylene Pumps are used in following applications and industries: Corrosive liquid handling Pharmaceutical industries Dyes and pigment industries Effluent treatment Slurry Fertilisers plants Paper and pulp industries HCL acid handling Caustic soda plants Thermal and atomic power plants Scrubbing process Electroplating Steel rolling mills

• Brand Name: Toss
• Material: Stainless Steel
• Brand Name: Reliable
• Color: Red
• BLACK: CI
• Voltage: 220 V
• Power Source: Electric
• Drive: Magnetic

We are the leading supplier of this products.

Our rich experience in the domain of offering top-tier Polypropylene Pumps makes us the glorious Manufacturer, Supplier and Exporter, both in India and abroad. The offered Polypropylene Pumps are made utilizing advanced techniques and material in adherence to the international quality standards. These are obtainable from us in custom specifications at affordable prices. Moreover, we execute prompt deliveries of even bulk orders owing to our efficient logistics.   Features : Steady performance Longer functional life Robust design Applications : Gardening And Irrigation Agriculture, Farms, civil Application Industries for clear water handling, cooling tower Water Supply for domestic use in apartments, building commercial, complex, swimming pools, automobiles service station, hospitals, club, hotels Power Plant, Fire fighting

AMBICA AMTMD – SERIES A HORIZONTAL, SINGLE STAGE SEALLESS CENTRIFUGAL MAGNETIC DRIVE PUMP. THIS  PUMPS ARE DESIGNED TO MEET THE PERFORMANCE REQUIREMENTS OF EVEN THE MOST DEMANDING PUMPING APPLICATIONS. THEY HAVE BEEN DESIGNED AND MANUFACTURED TO THE HIGHEST STANDARDS AND ARE AVAILABLE IN A VARIETY OF LIQUID PATH MATERIALS TO MEET YOUR CHEMICAL RESISTANCE NEEDS » APPLICATION › AMTMD – SERIES PUMPS ARE IDEAL FOR TRANSFERRING ACIDS, ALKALIS, HYDROCARBONS, HEAT TRANSFER OILS, LIQUID GASES, TOXIC AND EXPLOSIVE CHEMICALS IN INDUSTRIAL AND CHEMICAL INDUSTRIES. THEY ARE ALSO SUITABLE FOR PUMPING LOW VISCOSITY SURFACTANTS, ACIDS AND CIP CHEMICALS IN PHARMACEUTICAL AND COSMETIC INDUSTRIES. IN THE FOOD AND DRINK INDUSTRIES THEY ARE IDEAL FOR HANDLING CIP CHEMICALS, SUCH AS SODIUM HYDROXIDE, NITRIC ACID AND HYDROGEN PEROXIDE AND PUMPING WATER TREATMENT CHEMICALS.     OPERATING PARAMETERS › FLOW RATES UP TO 100 M3/H › OTAL DELIVERY HEADS UP TO 60 MTRS › TEMPERATURE RATINGS UP TO :-  120 °C › PUMP SIZE – DN :- 15 MM TO 100 MM › MOTOR SPEED – N :- 1440/2880 RPM AT 50 HZ & 1750-3500 RPM AT 60 HZ    TEMPERATURE RESISTANCE  › PP 50' TO 80' C › PPH 90" TO 100' C › PVDF 100' TO 115 C

• Brand Name: Omicron
• Material: Polypropylene
• Application: Automobile Industry
• Discharge Pressure: Medium
• Operating Type: Manual
• Diameter: 90 mm

Only qualitative raw material can result top-notch product range. Thus, we procure it from dependable names in the industry and that too after complete quality confirmation. Reckoned for our excellent customer care support, we have become preeminent suppliers of Polypropylene Rotary Barrel Pump in the industry.

Small size bare / monoblac poly propelene pumps. Fitted with seal / gland or PTFE bellow Mechanical seal. Shaft is of SS-304 / 316 with ceramic coating and (PTFE coating optional) Very economical models as pumps made with minimum parts. Very easy maintanance. Performance are at 2900 RPM, 50Hz and tested with clear water. Due to constant R & D activity, details are subject to change without prior notice. Application : Phosporic acid plants, Gas washing plants, Rayon plants, caustic joda plants for corrosive acids & basics, effluent treatment handling.

• Material: P P
• Brand: HINDUSTAN
• Usage/Application: Industrial
• Model Name/Number: PDVF PUMPS
• Max Flow Rate: 60 MTR
• Phase: THREE

The raw material used in the manufacturing of products are tested stringently by the experts to make certain that the final product is of premium quality and free from any kind of defect. Wholesale as well as retail consignments of the goods can be undertaken by us with ease. In addition, we promise to make as per schedule delivery. we manufacture pp pumps which used spacial material for high resistance to corrosion. we mfg high rang head and high capacity. Details Max head : 50 m Max capacity : 45 m3/hr Max size : up to 50 mm Delivery size max temp. : up to 120 c degree Max speed : 1000 to 3000 rpm Application : chemical industries, petro-chemical industries, pharma, process industries, paints ind, dyes ind, reactor process.

• Material: SS
• Frequency (Hertz): 50 - 60 Hz
• Phase: 3 phase
• Finishing: Paint Coated
• Automation Grade: Semi-Automatic

• Capacity: 50 m3/Hour
• Head: Maximum 50 Mtr
• Pump Speed: 1440/2900 RPM
• Connection Type: Flange Ended
• Pump MOC: Polypropylene
• Polypropylene: 50-60 Degree
• PVDF: 70-90 Degree

M.O.C Casing, Impeller, Back Plate : PP/ GRP / UHMWPE / PVDF Shaft Sleeve : GRP / Ceramic/ Alloy-20 / Hast AlloyB/C Bearing Bracket : C. I. GRFG - 26

Water Treatment Plant,Effiuent Treatement Plant,Transfer And Loading / Unloading Like Hcl,Sulphuric Acid,Caustic Liquid Scrubbing Of Corrosive Gasses Like Nh3,Co2,So2,L2,F2,Br2 Etc.Filter Press For Dyes & Chemicals.Circulation Of Chemicals In Metal Finlshing Industry. Technical Data :- Head : up to 45 Mtr. Flow :up to 50 m3 /hr Temp : up to 65-70 ° C/li> M.O.C. : PP,UHMWPE RPM :1440-2880 RPM Type : Mechanical Seal / Gland Type .

Sailent Feature:-   PP pumps are Specially design for highly corrosive liquids.Casing are made from injection molded poly propylene (Single piece).Semi-Open impeller made from UHMW for Low NPSH Performance.Pumps are fitted with Teflon-carbon gland packing or Teflon bellow mechanical seal.SS 316 Shaft Protected with ceramic sleeve.The pumps are also available in monoblock version. Application:- Highly corrosive, Acids, hydro carbons, effluent, slurries, Caustic solutions.The pumps are used in gas washing plants, Rayon plants, For Corrosive acid & basics.Electroplating Solution Circulation & itching Solution for electronic circuit board. Filter Press for dyes, Decaling.Picking of Steel in Cold Rolling Mills.

• up to 50 m3/hr: up to 45 mtr.
• 25 mm to 50 mm: 80° c
• up to 3500 rpm: up to 4.5 kg/cm2

Arriving in a scope of impeller distance across choices for each direct size according to the execution prerequisites, these can likewise be given diverse stream rates which make them reasonable to be utilized as a part of industry segments like pharmaceutical and paper and mash ventures. Further, PP Centrifugal Pumps are likewise appropriate for distribution of chemicals in pickling and electroplating plants. Application Water treatment plant, effluent, treatment plant, electro plating, steel rolling mills. Excellent for transfer and loading- unloading like HCL, sulphuric acid/alkali, caustic liquid. Scrubbing of corrosive gases such as NH3, CO2, SO3, SO2, I2, F2, BR2, CI2, etc.. For handling liquid in various industries such as textiles, paper, cellulose, sugar, steel, food, etc…. Ideal for circulation of chemical in metal finishing industry. Natural choice for pickling line & scrubber in steel plants. High capacity transfer pump, filter, press for dyes & chemicals, descaling, oil & other fuels. Features Designed to suit extremely corrosive duties in the process & chemical industries. Suitable for continuous services Self- venting type casing Dynamically & hydraulically balanced impeller with aerodynamic profile vanes. Greases / oil lubricants bearings Pumps are fitted with either mechanical seal or gland packing depending on the service condition. Shaft &sleeves of different material depending on the compatibility of the liquid to be handled.

Vertical Centrifugal process pump can be used in any installation or specially where the saving of space is important factor or mechanical seal not required. These pumps are designed for use where the liquid handled to be of highly corrosive nature or where non-adherence of product or zero metallic contamination is must. These pumps are equally ideal for continuous or intermittent service for hanling conrrosive as well as ultra pure chemicals without fear of corrosion or contamination. All components in the watted end of the pump are moulded of engineered plastic. These pumps are not only less costly than high alloy or exotic metal pumps, but they may be used safely in service where metal pumps are completely inadequate. Chemical Resistant All contact parts are made from Polypropylene with PTFE sealing-rings. Provides excellent resistance to corrosive and hazardous chemical liquids like HCL, H2SO4 (30% TO 80%), HNO3 . Specially designed to handle nearly all corrosives and erosives easily and efficiently for continuous and intermitent service. High Temperature Service Maximum working temperature is 1100c. Length Pumps lengths lengths available from 1' to 12' with flowrate upto 50 m3/h or 50 meterhead. Higher capacities and head available. Models Available in conventional or tailormade configuration. Several models such as suction extension with float switch, (auto on/off device)- also available with Polypropylene mounting plates. Special Features Bearing free design for handling abrassives in solutions. Motors are flange mounted Single or Three Phase TEFC from 1 HP to 10 HP. Epoxy / Polyurathene paints are used on metallic Bearing Housing. No metal in contact with solution. No danger of Corrosion or contamination. Heavy plastic sleeves isolates steel shaft from liquid being pumped. Radial vanes on backside of impeller increase flow of fluids through the sleeve bearing preventing overflow at top of column. Lubrication of bearings by product itself or by fresh water. All models operate at 1450 rpm / 2900 rpm. Specially designed vapour seal provided to protect bearing form corrosive fumes. Dynamically balanced impeller made from glass-filled reinforced engineered plastic. Bearings of High Allumina Ceramic Sleeves. Purity 99.5%. Application Fields These pumps are in extensive use in the fields of Pollution Control open tank Filteration Transferring Corrisive Chenicals Slurries Plating Bars Sewage Waste Water Treartment Plant.

• Material: Polypropylene
• Application: Water Use
• Pressure: High Pressure
•  Melting Point: 208 (98) Deg F (deg C)
• Surface: Polished
• Warranty: 1 year

• Size: Customized
• Type: Polypropylene Pumps
• Material: Plastic
• Plastic Type: PP
• Application: Water Use
• Color: Natural White, White
• Texture: Highly Soft, Soft
• Pressure: Low Pressure, Medium Pressure, High Pressure
• Features: Low Power Consumption

We offer premium quality Economy Polypropylene Pump, which is widely used in different industrial applications because its high performance even in challenging conditions.

• Size: 25 x 25

Phosporic acid plants, Gas washing plants, Rayon plants, caustic joda plants for corrosive acids & basics, effluent treatment handling.Due to constant R & D activity, details are subject to change without prior notice.

• Brand Name: TOSS
• Motor Horsepower: 2 HP
• Model Name/Number: RE-120
• Motor Phase: Three Phase
• Pump Type: CENTRIFUGAL
• Material: POLY PROPYLENE
• Usage/Application: Industrial
• Type Of End Use: Industrial

• Pressure: 5 Kg / Cm2
• Head: 50 Mtr.
• Flow: 45 m3 / hr.
• Temp: : 70 °C
• M.O.C: PP, UHMWPE
• RPM: 1440 – 2880 RPM

Application Water treatment Plant, Electro Planting & Steel Rolling Mills, Loading / unloading like HCL, Sulphuric acid / Alkali, Caustic Liquid. Scrubbing of corrosive gasses like CI2, NH2, BR2, etc. Ideal for Circulation of chemicals in metal finishing industry.

• LIQUID CHAMBER,1501: SUCTION BEND,1502

Max Flow Rate: 23 Lpm (6gpm),12" BSP (15mm) PP PVDF,Inlet: 12.70(12" BSP),Discharge: 12.70mm (12" BSP) Air Inlet: 6.35mm (14" BSP),Dry: 1.45m (4.75') Wet: 2.83m (9.28')

Bhagwati Engineering offers a wide range of Chemical Process Pumps. Pp pumps are a horizontal Single end Suction Standardized Back pull out Centrifugal Pumps.We are indulged in manufacturing, supplying and Exporting of Pp chemical process pumps in India. PP series process pumps are supplied with mechanical sealgland packing arrangement covering 85% of chemical industries requirement.Quality Assurance is an integral part of the total process for engineering and manufacturing pumps that meet customers’ requirements. Each pumps or system is put through series to ensure conformance to our high quality standard before it leaves the plant, maintaining the engineering edge in delivering technically Best pumps that result in lower installed cost and maintenance.

  Designed to suit extremely corrosive duties in the process & chemical industries.   Suitable for continuous service.   Multi stage with single suction die casting closed impeller.   Dynamically & hydraulically balanced impeller with aerodynamic profile vanes.   Pump casing is provided with external metal ring for construction stability.   Grease / oil lubricant bearings   Pumps are fitted with either mechanical seal or gland packing depending on the service conditions.   Shaft & sleeve of different material depending on the compatibility of the liquid to be handled.

PP pumps are Specially design for highly corrosive liquids.Casing are made from injection molded poly propylene (Single piece).Semi-Open impeller made from UHMW for Low NPSH Performance.Pumps are fitted with Teflon-carbon gland packing or Teflon bellow mechanical seal.SS 316 Shaft Protected with ceramic sleeve.The pumps are also available in monoblock version.   Application:- Highly corrosive, Acids, hydro carbons, effluent, slurries, Caustic solutions.The pumps are used in gas washing plants, Rayon plants, For Corrosive acid & basics.Electroplating Solution Circulation & itching Solution for electronic circuit board. Filter Press for dyes, Decaling.Picking of Steel in Cold Rolling Mills.