Pooja Switchgears Gandhi Road, Ahmedabad, Gujarat

Technical Information: Tested in accordance with IS/IEC 60898-1 and are ISI marked CE marking fulfils the requirement of Global Standard. Protection against Over Load & Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make & Break trip free mechanism. Protection in Switch Board. Compact in Size. Suitable for Residential & Commercial applications.

Country of Origin : India

Technical Information: Tested in accordance with IS/IEC 60898-1 and are ISI marked CE marking fulfils the requirement of Global Standard. Protection against Over Load & Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make & Break trip free mechanism. Protection in Switch Board. Compact in Size. Suitable for Residential & Commercial applications.

Country of Origin : India

Our Residual Current Circuit Breakers provide high protection against earth leakage. They are CE approved and are made 100% compliance with the IS: 12640-1:2008 and ISI standards. So, they surpass the quality parameter. We procure these RCCBs from reliable vendors and make them available throughout the country in time-efficient manner. We are reckoned among the leading Suppliers of Residual Current Circuit Breakers in Ahmedabad, Gujarat.   RCCB'S Operational PrincipleMicron RCCB is a current operated device and is independent of line voltage conditions. This means that they provided protection even when there is voltage dip or the neutral conductor is interrupted. In a healthy system the vector sum of all currents in phases and neutral is equal to zero. The device senses inbalance or residual currents in the system and Disconnects Supply system.   Features : State-of-the-art design RCCBs are completely type tested in accordance with IS: 12640-1 :2008 and are 151marked. CE marking fulfils the requirement of global standard. Elegant appearance High short circuit current withstand capacity with backup protection fuse Equipped with finger protected connection terminals The housing of RCCBis moulded from special grade engineering Plastic and flame retardant. Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity. Test button 'T' is provided for periodic checkup. Protection against direct and indirect lines. Simple and Robust operating mechanism. Dual Position Clip.

Material : Plastic

Color : Creamy

Power Source : Electric

Feature : Best Quality, Durable, High Performance, Use Friendly

Warranty : 1year

Current Type : AC

Puncture Voltage : 400-500V

 Connection Type : 4way, 6way

We cater for the market across the country with our premium Distribution Board Enclosure. We are standing amid the most preferred Suppliers of Distribution Board Enclosure in Ahmedabad, Gujarat. This equipment is fabricated in accordance with the IS 13032 and IS 8623-3 standards.

Shape : Rectangular

We are the prominent Supplier of highly efficient On Load Changeover Switch sourced from trusted vendors. Before procurement, our quality inspectors strictly check On Load Changeover Switch against numerous quality parameters. We make available our On Load Changeover Switch in different frame sizes and at very inexpensive rates. Also, with the assistance of our modern transit facilities, we are able to deliver the orders on time.   Featurs : State-of-the-art design CE marking fulfils the requirement of global standard. Suitable for incoming and outgoing feeders 3 stable positions (1-0-11) This change over switch are use to control and disconnect any kind of circuit disconnection. Compact design Quick make & break type Resistant to tropical conditions & polluted environment High thermal & dynamic withstand capacity Bounce Free contacts Any pole can be used as neutral pole Body parts are made of superior quality of thermoset plastics Unique safety handle with built in door padlock facility Available in open execution, Steel sheet enclosure & Direct Mounted type. Available in various frame size. Also available ON LOAD BY PASSSWITCH & LOAD BREAKSWITCH

Material : Plastic

Certification : CE Certified

Application : Control Panels

Automatic Grade : Automatic

Tensile Strength : 0-25Mpa

Standard : DIN, ETDC

Feature : Electrical Porcelain, Proper Working, Sturdy Construction, Water Proof

Warranty : 1yr

Our MCCBs are absolutely compliant with the IS/IEC 60947-2 standards. We procure them from reliable manufacturers and serve the country with these best-in-class Moulded Case Circuit Breaker (MCCB). We are an authorized Supplier of Moulded Case Circuit Breaker (MCCB) in Ahmedabad, Gujarat. We are appreciated for delivering foolproof and quality assured products and that too in time. Buy them at best prices from us!   Features Compact Size in Selected rating. Four Pole Version available with neutral fully protected Push to trip button provision. Suitable for use as switch disconnected provide overload & short circuit protection. Available in both fixed & adjustable magnetic settings Adjustability - Offers close protection to different load condition. Low let through energy Available of motor driven operation mechanism Line load reversibility Positive isolation High repeat accuracy - reliable protection Available with wide range of accessories. Available in enclosed version

Material : Plastic

Power Source : Electric

Feature : Best Quality, Durable, High Performance, Use Friendly

Warranty : 1year

Current Type : AC

Puncture Voltage : 100-200V

 Connection Type : 3way, 4way

Technical Information: Tested in accordance with IS/IEC 60898-1 and are ISI marked CE marking fulfils the requirement of Global Standard. Protection against Over Load & Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make & Break trip free mechanism. Protection in Switch Board. Compact in Size. Suitable for Residential & Commercial applications.

No.Of Poles : Single Pole

Country of Origin : India

Technical Information: Tested in accordance with IS/IEC 60898-1 and are ISI marked CE marking fulfils the requirement of Global Standard. Protection against Over Load & Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make & Break trip free mechanism. Protection in Switch Board. Compact in Size. Suitable for Residential & Commercial applications.

Country of Origin : India

We bring high-quality Miniature Circuit Breaker (MCB's) for the market across the country. We are counted among the preeminent Suppliers of Miniature Circuit Breaker (MCB's) in Ahmedabad, Gujarat. We have a range of MCBs, which includes SP, DP, SPN, TP, TPN, and FP. Each MCB is CE certified, thereby, warranting its quality.    The switch is provided with shunt trip coil incorporated in series with the fixed & moving contact. The two leads are taken out for application of tripping voltage to the coil. For tripping voltage is applied across the coil via leads. Once the coil will become inoperative due to its inherent features & hence coil will be safe even if the tripping voltage is applied for more time to continuously.   Features : State-of-the-art design MCSs are completely type tested in accordance with IS/IEC 60898-1 and ISI marked. CE marking fulfils the requirement of global standard. Shock Proof: Finger and hand touch safe. Protection against electric shock. The housing of MCS is moulded from special grade PST Fire resistant plastic parts ensure protection against heating and strong impact. Contacts are made of special silver inlaid copper, ensuring higher life and maximum safety against contact welding and Low temperature rise. Low Watt Loss A quick make & break trip free mechanism. Short Circuit Protection Over load Protection Dual Position Clip.

Material : Ceramic

Power Source : Electric

Feature : Best Quality, Easy To Fir, Shock Proof, Use Friendly

Warranty : 1year

Current Type : AC

Puncture Voltage : 100-200V

Micron Mini Changeover Switch is used for switching to an alternate source of supply from the main supply.It is made from first resistant engineering plastic ensuring safety against heating and strong impact.Compact design makes it suitable for use in low voltage distribution circuitTechnical Information: Standard Conformity : IS/IEC 60947-3 Rated Current (In) : 40, 63 AMP Rated Voltage (Un) : 415V AC Rated Frequency : 50 Hz Dielectric Strength : 2000 V for 1 Minute Rated Insulation Voltage (Ui) : 660 V Rated Impulse Voltage (Uimp) : 4 kV Energy Limiting Class : Class 3 Ambient Temperature(˚C ) : -5˚ to 55˚ Degree of Protection : IP20 Mounting : Snap on DIN rail at (35mm x 7.5mm) Features: » Manually operated changeover switching to an alternate supply of source from main supply.» CE marking fulfils the requirement of Global Standard.» Environment friendly, meets the ROHS compliance as defined by the European Standard.» All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.» Compact Design suitable for use in low voltage Distribution Circuit.» Silver cadmium oxide contact tips. » Double Break contact.» Shrouded terminals.» Front operation with state position I-O-II - Mid position off.» Can be mounted with other products like MCB/RCCB/Isolators in Distribution Board.» Suitable for Residential & Commercial applications

Brand Name : Micron

Condition : New

Country of Origin : India

Phase : Three Phase

Poles Number : 4 Pole

Switch Control : Manual

Micron Mini Changeover Switch is used for switching to an alternate source of supply from the main supply.It is made from first resistant engineering plastic ensuring safety against heating and strong impact.Compact design makes it suitable for use in low voltage distribution circuitTechnical Information: Standard Conformity : IS/IEC 60947-3 Rated Current (In) : 40, 63 AMP Rated Voltage (Un) : 240V AC Rated Frequency : 50 Hz Dielectric Strength : 2000 V for 1 Minute Rated Insulation Voltage (Ui) : 660 V Rated Impulse Voltage (Uimp) : 4 kV Energy Limiting Class : Class 3 Ambient Temperature(˚C ) : -5˚ to 55˚ Degree of Protection : IP20 Mounting : Snap on DIN rail at (35mm x 7.5mm) Features: » Manually operated changeover switching to an alternate supply of source from main supply.» CE marking fulfils the requirement of Global Standard.» Environment friendly, meets the ROHS compliance as defined by the European Standard.» All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact.» Compact Design suitable for use in low voltage Distribution Circuit.» Silver cadmium oxide contact tips. » Double Break contact.» Shrouded terminals.» Front operation with state position I-O-II - Mid position off.» Can be mounted with other products like MCB/RCCB/Isolators in Distribution Board.» Suitable for Residential & Commercial applications

Brand Name : Micron

Application : Suitable For Residential & Commercial Applications.

Country of Origin : India

Phase : Single Phase

Mini Change Over that we supply is procured from the trustworthy manufacturers or vendors present in the market. Our Mini Change Over is available in different types like DP and FP. Precisely engineered, our Mini Change Over is accredited for its durable construction, high performance, compact design, etc. We make available our Mini Change Over in bulk and at very reasonable rates.   Features : State-of. the art design. ( E marking fulfils the requirement of global standard. The housing of MCB is moulded from specia grade PBTand flame retardant Fire resistant plastic parts ensure protection aqanst heating and strong impact. Compact construction. Double break contacts. Silver cadmium oxide contact tips. Shrouded terminals. Front operation with three stable position 1-0 Centre position OFF. Easy snap on DIN Rail mounting. Can be mounted with other products viz. MCBs/RCCBs/lsolators in Distribution Board. Dual Position Clip.

Certification : ISI Certified

Application : Electrical Use

Weight : 1.010 kg

Feature : Blow-Out-Proof, Corrosion Proof, Good Quality

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit Technical Information: Standard Conformity : IS/IEC 60898-1:2015 Rated Current (In) : 6,10,16,20,25,32,40,63 AMP  Rated Breaking Capacity : 10000A (10 kA)  Rated Voltage (Un) :415V AC  Rated Frequency : 50 Hz  Dielectric Strength : 2000 V for 1 Minute  Rated Insulation Voltage (Ui) : 660 V  Rated Impulse Voltage (Uimp) : 4 kV  Energy Limiting Class : Class 3  Ambient Temperature(°C ) : -5°C to 55°C  Degree of Protection : IP20  Tripping Mechanism : Thermal and Magnetic  Type Mounting : Snap on DIN rail at (35mm x 7.5mm)  Connecting Terminals : 25mm²   Micron Features Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked. CE marking fulfils the requirement of Global Standard. Protection against Over Load and Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make and Break trip free mechanism. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance. Positive Isolation. Suitable for Residential and Commercial applications.

Brand Name : Micron

Type : C Curve

Country of Origin : India

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit Technical Information: Standard Conformity : IS/IEC 60898-1:2015 Rated Current (In) : 6,10,16,20,25,32,40,63 AMP  Rated Breaking Capacity : 10000A (10 kA)  Rated Voltage (Un) :415V AC  Rated Frequency : 50 Hz  Dielectric Strength : 2000 V for 1 Minute  Rated Insulation Voltage (Ui) : 660 V  Rated Impulse Voltage (Uimp) : 4 kV  Energy Limiting Class : Class 3  Ambient Temperature(°C ) : -5°C to 55°C  Degree of Protection : IP20  Tripping Mechanism : Thermal and Magnetic  Type Mounting : Snap on DIN rail at (35mm x 7.5mm)  Connecting Terminals : 25mm²   Micron Features Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked. CE marking fulfils the requirement of Global Standard. Protection against Over Load and Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make and Break trip free mechanism. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance. Positive Isolation. Suitable for Residential and Commercial applications.

Type : C Curve

Country of Origin : India

Frequency : 50 Hz

Micron isolator helps separate any electrical component from its system while the system is offline or online. A mechanical switch isolates a particular fraction of the circuit when its opening is required in a no-load condition. The Isolator should not be opened when the current is flowing through the line. The isolators are placed on both sides of the circuit. Thus, circuit breaker repair can be done with ease and no risk. Technical Information Standard Conformity : IS/IEC 60947-3 Rated Current (In) : 40, 63, 100 AMP Rated Voltage (Un) :415V AC Rated Frequency : 50 Hz Rated Insulation Voltage (Ui) : 660 V Rated Impulse Voltage (Uimp) : 4 kV Dielectric Strength : 2000 V for 1 Minute Energy Limiting Class : Class 3 Ambient Temperature(˚C ) : -5˚ to 55˚ Degree of Protection : IP20 Mounting : Snap on DIN rail at (35mm x 7.5mm) Connecting Terminals : 25mm²/35mm²   Features Switch disconnector with independent manual operation. CE marking fulfils the requirement of Global Standard. Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Positive Isolation Suitable for Residential & Commercial applications.

Color : White, Red

Condition : New

Certification : IS/IEC60947-3

Country of Origin : India

Micron distribution board is vital for any commercial and residential entity when supplying electricity to the whole property. The cable from the main comes to the distribution board, and in the distribution board, it gets distributed via breakers and transferred to secondary circuits such as lights and plugs. To maintain your devices' optimal performance, you need to have proper power distribution both indoors and outdoors. Micron distribution board isn't just an enclosure. It in-houses an overall system that comes with neutral links along with an earth leakage unit. It has interconnecting wires that serve the purpose of proper electrical distribution. Micron double door distribution board can be used for heavy-duty distribution tasks. The distribution boards have an aesthetic design and are user friendly   Features Conformity to IEC 61439/IS:13032 & IS:8623 Premium quality power coating with Mat finish. DB’s are made of special CRCA sheet for strength and finish. These DB’s undergo a Seven-Tank Phosphating process to ensure anti rust conditioning, superior finish and lasting strength. Compact DB’s which occupy minimum space. Removable top & bottom gland plate with knock out. Provided with neutral link, earth link and insulated busbar. Plastic and Sheet Steel Enclosures for independent cut off / connection of the electrical appliances. IP Protection – IP20/42. Suitable for surface and flush mounting. Suitable for MCB’s/Isolator/RCCB as incoming and SP as outgoing.

Color : Grey

Country of Origin : India

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit Technical Information: Standard Conformity : IS/IEC 60898-1:2015 Rated Current (In) : 6,10,16,20,25,32,40,63 AMP Rated Breaking Capacity : 10000A (10 kA)  Rated Voltage (Un) : 240V AC Rated Frequency : 50 Hz  Dielectric Strength : 2000 V for 1 Minute  Rated Insulation Voltage (Ui) : 660 V  Rated Impulse Voltage (Uimp) : 4 kV  Energy Limiting Class : Class 3  Ambient Temperature(°C ) : -5°C to 55°C  Degree of Protection : IP20  Tripping Mechanism : Thermal and Magnetic  Type Mounting : Snap on DIN rail at (35mm x 7.5mm)  Connecting Terminals : 25mm²   Micron Features Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked. CE marking fulfils the requirement of Global Standard. Protection against Over Load and Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make and Break trip free mechanism. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance. Positive Isolation. Suitable for Residential and Commercial applications.

Certification : IS/IEC 60898-1:2015

Rated Current : 6, 10, 16, 20, 25, 32, 40, 63A

No.Of Poles : Single Pole And Neutral

Country of Origin : India

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit Technical Information: Standard Conformity : IS/IEC 60898-1:2015 Rated Current (In) : 6,10,16,20,25,32,40,63 AMP Rated Breaking Capacity : 10000A (10 kA)  Rated Voltage (Un) : 240V AC Rated Frequency : 50 Hz  Dielectric Strength : 2000 V for 1 Minute  Rated Insulation Voltage (Ui) : 660 V  Rated Impulse Voltage (Uimp) : 4 kV  Energy Limiting Class : Class 3  Ambient Temperature(°C ) : -5°C to 55°C  Degree of Protection : IP20  Tripping Mechanism : Thermal and Magnetic  Type Mounting : Snap on DIN rail at (35mm x 7.5mm)  Connecting Terminals : 25mm²   Micron Features Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked. CE marking fulfils the requirement of Global Standard. Protection against Over Load and Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make and Break trip free mechanism. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance. Positive Isolation. Suitable for Residential and Commercial applications.

Certification : IS/IEC 60898-1:2015

Rated Current : 6, 10, 16, 20, 25, 32, 40, 63A

No.Of Poles : Single Pole

Country of Origin : India

Technical Information: Standard conformity : IS/IEC 60947-3 Rated Current (In) : 63 - 630 AMP Rated Voltage (Un) : 415V AC Rated Frequency : 50 Hz Dielectric Strength : 4/5 kV for 1 minute Rated Insulation Voltage (Ui) : 750/1000 V Rated Impulse Voltage (Uimp) : 6/8 kV Frame Size : 1( 63A/100A), 2 ( 125A /160A/200A), 3 ( 250A/320A), 4( 400A/630 A)   Features: Clear indication of 'ON' 'OFF' and 'ON' 3 stable position (I-O-II). Compact body of fiber-glass reinforced polyester resin. Quick make & break mechanism. Bounce Free contacts. Easy installation and panel mounting. Suitable of incoming & outgoing feeders Suitable for Residential & Commercial applications  

Brand Name : Micron

Application : Electricity Board To Generator Changeover Switch

Type : Onload Changeover

Country of Origin : India

Technical Information: Standard conformity : IS/IEC 60947-3 Rated Current (In) : 63 - 630 AMP Rated Voltage (Un) : 415V AC Rated Frequency : 50 Hz Dielectric Strength : 4/5 kV for 1 minute Rated Insulation Voltage (Ui) : 750/1000 V Rated Impulse Voltage (Uimp) : 6/8 kV Frame Size : 1( 63A/100A), 2 ( 125A /160A/200A), 3 ( 250A/320A), 4( 400A/630 A)   Features: Clear indication of 'ON' 'OFF' and 'ON' 3 stable position (I-O-II). Compact body of fiber-glass reinforced polyester resin. Quick make & break mechanism. Bounce Free contacts. Easy Installation. Suitable of incoming & outgoing feeders Suitable for Residential & Commercial applications

Brand Name : Micron

Color : Grey

Condition : New

Automatic Grade : Manual

Application : Electricity Board To Generator Changeover Switch

Type : On Load Changeover

Country of Origin : India

Technical Information: Standard Conformity to IEC 62640, C-Curve, 240V AC , 50HZ, Breaking Capacity 3kA. A quick make & break trip free mechanism Over load & short circuit protection Easy to operate & replace IP 20 protection Shock proof, Compact & Elegant design with indicator Enclosures are made of engineering plastic Poly Carbonate  

Brand Name : Micron

Current Type : AC

Condition : New

Country of Origin : India

Micron Moulded Case Circuit Breakers (MCCB) is an electrical protection system that comes with a fixed trip setting.Micron MCCBs have an aesthetic design and are user friendly. It offers safety ,reliability and versatility .In the case of electrical faults, MCCB immediately interrupts the flowing current, which could be too high due to the mainline's issues. When the current present in the circuit is higher than the rated value and lasts longer than the expected time, then MCCB trips to protect the electrical system   Technical Information Standard Conformity : IS/IEC 60947-2 Rated Current (In) : 63,100,125,160,200,250,400,630 AMP Rated Voltage (Un) : 415V AC Rated Frequency : 50/60 Hz Rated Breaking Capacity : 10KA to 50KA Rated Insulation Voltage (Ui) : 690 V Rated Impulse Voltage (Uimp) : 8 kV Ambient Temperature(˚C ) : 5˚ to 55˚ Mounting : Fixed Frame Size : 1. (63/100A) = 10KA,  2. (100/125A) = 25KA,  3. (160A/200A/250A) = 35KA,  4. (400A/630A) = 50KA   Features » Housing is made of heat resistant insulating material. » Clear indication as “ON” or “OFF” of Trip Protection Device. » Push to trip button, Provision to check tripping of mechanism. » Fixed thermal & Magnetic setting. » Quick make, Quick break & Trip free operating mechanism. » Highly mechanical and electrical life. » Easy installation and can be mounted up to 90° in any direction. » Terminal suitable for both Copper & Aluminium termination. » Finger proof terminals. » Suitable for Residential, Commercial and Industrial use. » Suitable for isolation and use as a disconnection provide overload & short circuit protection

Brand Name : Micron

Color : Grey

Rated Current : 100A

Micron Residential Current Circuit Breaker (RCCB) is a crucial current sensing safety system that protects electrical appliances   Technical Information: Standard Conformity : IS 12640-1 & IEC 61008-1 Rated Current (In) : 16,25,32,40,63 AMP Breaking Capacity : 6000 A ( 6 KA) Rated Voltage (Un) :415V AC Sensitivity (lln) : 30ma, 100ma, 300ma Dielectric Strength : 2000 V for 1 Minute Rated Insulation Voltage (Ui) : 660 V Rated Impulse Voltage (Uimp) : 4 kV Energy Limiting Class : Class 3 Ambient Temperature(˚C ) : -5˚ to 55˚ Degree of Protection : IP20 Mounting : Snap on DIN rail at (35mm x 7.5mm) Connecting Terminals : 35mm²    Features: Tested in accordance with IS:12640-1 & IEC 61008-1 and are ISI marked CE marking fulfils the requirement of global standard Environment friendly, meets the ROHS compliance as defined by the European Standard. Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. Trip quickly when earth fault/ leakage current occurs and prevent from electric shock Test button ‘T’ is provided for Regular Inspection Simple and Robust operating mechanism. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Positive Isolation. Suitable for Residential & Commercial applications

Brand Name : Micron

Rated Voltage : 415V AC

Country of Origin : India

Micron Miniature Circuit Breaker (MCB) protects the low voltage electrical appliances and circuits which can be damaged due to overload or short circuit Technical Information:   Standard Conformity : IS/IEC 60898-1:2015 Rated Current (In) : 6,10,16,20,25,32,40,63 AMP  Rated Breaking Capacity : 10000A (10 kA)  Rated Voltage (Un) :415V AC  Rated Frequency : 50 Hz  Dielectric Strength : 2000 V for 1 Minute  Rated Insulation Voltage (Ui) : 660 V  Rated Impulse Voltage (Uimp) : 4 kV  Energy Limiting Class : Class 3  Ambient Temperature(°C ) : -5°C to 55°C  Degree of Protection : IP20  Tripping Mechanism : Thermal and Magnetic  Type Mounting : Snap on DIN rail at (35mm x 7.5mm)  Connecting Terminals : 25mm²   Micron Features   Tested from ERDA in accordance with IS/IEC 60898-1 and are ISI marked. CE marking fulfils the requirement of Global Standard. Protection against Over Load and Short Circuit. Environment friendly, meets the ROHS compliance as defined by the European Standard Shock Proof: Finger and Hand touch safe. All moulded parts made from fire resistance engineering plastic ensures protection against Heating and Strong impact. Watt Loss value are much lower than the specific values of IS/IEC Consumes less power, thus cost effective and energy saving. A quick make and Break trip free mechanism. Bi-connect terminals at both sides giving a choice of using either a busbar or a cable to make the connection. Better Arc Quenching values and Cooling system which ensure enhanced shot circuit performance. Positive Isolation. Suitable for Residential and Commercial applications.

Type : C Curve

Country of Origin : India

Frequency : 50 Hz