Powder Filling Machine Dealers in Vastral, Ahmedabad

• Type: Powder Packaging Machine
• Certification: ISO 9001:2008
• Color: MATT
• Voltage: 220V
• Condition: New
• Function: Packing
• Automatic Grade: Automatic, Semi Automatic
• Power: 3-5kw
• Packaging Type: Bags, Bottles, Cans
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Weight: 100-1000kg, 1000-2000kg
• Country of Origin: India

Single Auger Powder Filling Machine   Single Auger Powder Filling Machine is uses for the filling and capping of dry syrup bottles in pharmaceutical industry. We are having different machine models suitable as per different customer requirements.       Salient Features    Compact GMP model.    “No Bottle– No Filling” system.    Multiple Dosing System.    ± 1% filling accuracy.    Built-in Rubber Stoppering Unit saves lot of space in the Sterile Area & reduces the length of Laminar Flow.    “No stopper in chute - Machine stop” system.    All motors are provided with appropriate contractors and relays for the protection against any overload or jamming.    Safety clutch system to avoid Bottle breakage.    Variable A.C. Frequency Drive for speed control.    All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization.    S.S. square pipe frame structure to avoid vibration.    All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.    Imported Gear Motor for Main drive, in feed and out feed table.   Process Operation     The sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one. The filled containers are immediately separated on the conveyor by bottle separator and moves further for stoppering operation. The sterilized, siliconised, rubber stoppers stored in the vibrator bowl moves to vibratory bowl and stacked vertically in the rubber stopper chute. The container is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further the container is passed between two pressing roller for tight fit fixing of rubber stopper.

Adinath International offers Injectable Powder Filling Machine that is suitable to fill injectable powder into vials. The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine by a leading manufacturer and exporter of pharmaceutical machinery in Ahmedabad, India.

• Container Diameter: 25mm to 38mm
• Container Height: 36mm to 75mm

Injectable Vial Dry Powder Filling line Complete line of Injectable Vial Dry Powder Filling line like Injectable dry powder filling with rubber stoppering machine, Automatic Aluminium Vial cap sealing machine, Automatic Online Visual Inspection Table, Automatic Round Container Self Adhesive (Sticker) Labelling Machine, Dry powder filling machine, Packing Conveyor Belt etc. some customer looking Vial Powder Filling Machine ,Dry Powder Filling & Rubber Stoppering Machine , Sterile Powder Filling Machine , Injectable Powder Filling & Rubber Stoppering Machine with speed available different model 20 vail per minute to 400 vail per minute depend suitable line machines. The Injectable Powder Filling Machine is ideal for adding injectable powder into vials. The exterior of the machine is essentially made up of stainless steel i.e. the parts of the machine that come into direct contact with air - such as container and rubber stopper etc. Furthermore, to service the machinery in the best possible manner and to ensure the best quality comes from this powder filling machine, the welded steel frame is also made using stainless steel which has access doors to it as well to increase the longevity of this automatic powder filling machinery.

• Weight: 500-1000kg
• Automatic Grade: Automatic
• Warrenty: 1year
• Volume: 2 gms to 30 gms
• Output Speed: Up to 50 bottles/ minute

Rotary Dry Syrup Powder Machine is used to fill dry syrup powder. Rotary Dry Syrup Powder Machine is really very good for the bottles having the height of 100mm and the diameter of 85mm with a square or rectangle shape. It has the efficiency of producing 80 bottles a minute based on the size and diameter of the bottle as well as powder type.   Salient Features  Robust and vibration free design Minimum changeover time Compact & versatile design Easy to clean Suitable for different volumes   Application Filling     Industry  Pharmaceuticals Veterinary

Semi Automatic Auger Type Powder Filling Machine is precision built on sturdy welded MS frame completely enclosed in stainless steel sheet and doors are provided to facilitate the servicing of machine. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body. Product details :  Out put / Hour -1200 containers  Electrical load 0.75 KW  Fill Size 5 Gms to 1 Kg  Electric Specification 1 HP / 415 Volts / 50 Hz  Net Weight 200 Kgs Features :  Semi Automatic with filling range from 5 Gms to 1000 Gms  Body covered with SS sheet  All contact parts SS 316.  A unit to fill variety of fine and granulated powder and can be used for various type of containers.

• Approx Price: Rs 2.75 Lakh / Piece

Our team professionals ensure that smooth transactions are done and for that reason, we accept payments through letter of credit & money transfer. This makes us most reliable amidst the clients. Ours is a reckoned name in the domain as we are capable of bringing forth quality products, fabricated using the experts approved raw material. We only make use of certified raw material to maintain high standards.   Features : Easy to operate Low maintenance Long service life

• Material: Stainless Steel
• Capacity: >4000 pouch per hour
• Driven Type: Electric
• Automatic Grade: Automatic
• Usage/Application: Industrial
• Model Name/Number: BEPFLM01
• Number Of Filling Heads: One
• Power Consumption: 2HP

• Automation Grade: Automatic
• Brand Name: Bhalani
• Condition: New
• Machine Type: Automatic
• Packaging Material: Iron, Plastic, Paper
• Voltage (Volt): 240 to 440
• Power Source: Electric

We are the exporter and supplier of this products.

Find here details of companies selling Auger Filler Machine, for your purchase requirements. Get latest info on Auger Filler Machine, suppliers, manufacturers, wholesalers, traders with Auger Filler Machine prices for buying.

• Driven Type: Electric
• Packaging Type: Vials
• Condition: New
• Voltage: 440 Volts
• After-Sales Service Provided: Engineers available to service machinery overseas
• Certification: ISO 9001 2015
• Type: Filling Machine
• Port: Mumbai
• Supply Ability: 5 Unit/Units per Month
• Place of Origin: Gujarat, India
• Model Number: APF-120
• Packaging Details: Product & transport worthy wooden packing
• Lead Time: Depends upon machine model
• Automatic Grade: Automatic

• Condition: New
• Power: 4 KW
• Brand Name: NU PHARMA
• Capacity: 1000/Hour
• Machine Type: Semi-Automatic

Features : Efficient functioning Easy operation Low operating cost Reasonable pricing

• Material: Stainless Steel
• Driven Type: Mechanical
• Capacity: 0-500 Pouch Per Hour
• Automatic Grade: Semi-Automatic
• Brand Name: DHRUVESH

• Phase: Three Phase
• Material: Stainless Steel
• Automatic Grade: Semi-Automatic
• Accuracy: + or - (1%)
• Condition: New
• Output: 20 to 40 Bottles per Min 

We offer heavy duty auger filler machine. Sailent features * the machine is very much suitable to pack detergent powder, coffee powder, skimmed milk powder, spices, flour, baking power, curry powder, besan, henna, pharmaceutical powder, talcum powder etc. * highly accurate weight based systems ensures high speed and less change over time. * accuracy + 2% depending on the consistency uniformity and bulk density of powder under the controlled level of humidity. * capability to handle wide range of products & pack sizes. * no container no fill system ensures no wastage of costly powder material.

Competencies » Total CGMP model » Frame Made from SS-structure, with height adjustment » Sleek sturdy and compact design » All controls from the panel » Left to right and right to left options available » PLC HMI-Touch screen Features » Multiple dispensing units in single hopper mechanism.    [Send us inquiry to know manyfold benefits of it] » No bottle no fill arrangement » Requires minimum bottle change parts and very quick changeover. » Very high dosing accuracy » Parts can be easily declamped/clamped for quick cleaning and changeover » Completely Fail safe design » No bottle no fill arrangement Accesseries » Dust collector » Spoon Feeder » Powder loader » Pre/post check weigher » Pre/post inspection unit Utilities » 415V, 3-phase, 50hz electric supply » Electric load:- 5HP » Air:- 5 CFM @ 4 to 6 kg/cm2 FEATURES » Vibratory mechanism for sticky or hygrospcopic powder » Synchronisation with nitrogen Purging » Mechanized slug breaker » Integration for check-weightier /inspection units » Rejection of non-accurate bottles » Weighing of each dose » Monoblock machine for Screw capping/ROPP capping APPLICATION » To fill Dry syrup/Powder in containers » Container diameter:- 30 to 90 mm » Container height:- 30 to 150 mm » Dose:-20 gm to 1000 gms

The Automatic High Speed Rotary Dry Syrup Powder Filling Machine Model SBPF-120R is suitable for Glass, Plastic, PET, HDPE, and LDPE Bottles with maximum speed of 100 Bottles per minute depending on Powder Fill Volume, Type of Powder, Bottle Diameter and Bottle Neck Diameter.Machine in Stainless Steel Finish with heavy duty frame structure with S.S, Clading. All parts coming in contact with Powders are made from SS316 Materials as well as HDPE Funnels.The Machine works on proven time tested Vacuum and Air Systems to Fill powder in Bottle achieving higher speed and higher accuracy. Machine with unique Bottle Lifting and Neck Holding system avoid spillage of powder on bottle shoulder, neck and body keeps bottle clean and also avoid wastage of powder.

• Power requirement:: 440 Volt, 3 Phase (4Wire system) 220 V A.C single phase 50 Hz.
• roll size: 180mm to 325mm width lay flat roll

FULLY AUTO AUGER FILLER MACHINE The machine is very much suitable to pack detergent powder, coffee powder, Skimmed Milk Powder, Spices, Flour, Baking Power, Curry Powder, Besan, Henna, Pharmaceutical Powder, Talcum Powder etc. Designed for fast and easy change over for container size and fill weights without additional change parts in many instances. Accuracy of the pouch length is maintained by clutch-break mechanism. Accuracy + 2% depending on the consistency uniformity and bulk density of material under the controlled level of humidity.

AF Series Auger Filling Machine is the latest development from EEWA. Its every Auger fillers are designed and built to the customer’s packaging filling needs, with a control system and components adapted to exact product requirements. Speeds are depending upon the product fill SALIENT FEATURES Variable speed Electro – magnetically speed control Photocell sensor system Stainless steel hopper and auger All product contact parts are in stainless steel Improved accuracy

APPLICATION & PROCESS : Semi automatic dry powder auger filler is a versatile filling machine ideal for non-free flowing, fluffy & sticky powders e.g. talcum powder, tooth powder, custard powder, pesticide powders, ground spices etc. Semi automatic dry powder auger filler utilizes the principle of positive displacement of screw. Precisely designed auger is displaces product through funnel. Digital timer controls is fill require quantity through an electromagnetic clutch-brake unit. Fill quantity can be adjusted by through digital timer by setting of filling on time and fills material directly in container from bellow of funnel. Container or pouches are to be placed manually under funnel. SALIENT FEATURES : Designed as per cGMP - Current Good Manufacturing Practices compliance All contact parts AISI 316 & non contact parts AISI 304. Easy changeover for different pack sizes. Filling weight easily sets by timer of auger. Versatile Agitator Mechanism ensures continuous flow of products, to the Auger. Machine can be operating through foot Switch. Simple Construction assists maintenance and cleanliness.

We are top manufacturer of Auger Filling Machine. The Auger filler is Semi-Automatic Powder Filling Machine also known as semi automatic powder filler which is used to fill accurate weight size of powder in bottles, pouches. This machine is commonly used for powdery and dusty products. Our Auger Filling Machine and FFS Machine find application in pharmaceutical, Food, Chemical and pesticide industry. Auger filling equipments are used in chemical powder filling, milk powder filling, cocoa milk powder filling. The high accuracy achieved through this filling system is because of the accurate design of auger screw, latest technology based clutch brake and its latest micro processor control system. Auger Filler Machine is also available in servo motor based filler.   Features of Auger Filling Machine : Auger Type Powder Filling Machine. Elegant and Easy reach control panel for total control on operation. No Container Machine stop system. Rigid vibration free construction for trouble free performance. Suitable for packaging of Powders, Granules and Liquids

Product Specification :Automatic Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles. The incoming dry bottle sterilized is fed through the in feed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle. Silent Features : Total Compact c GMP model. All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/ Sterilization. "NO BOTTLE, NO FILL" System eliminates wastage of costly powder. Conveyor driving is through High quality imported Gear motor  Machine speed can be adjusted by A.C. Frequency drive, which is time saving. Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor. Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine. Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation. No change parts are required for any change in bottle diameter from 30 to 120 ml. Imported Gear Motor for Conveyor drive. A.C. Frequency drive for Conveyor drive. "No Bottle, No Filling" System. Pneumatic bottle holding system.

Automatic Injectable Powder Filling with Rubber Stoppering is a compact model used for filling Stoppering of Dry Powder Injectable in to vials. The incoming dry container sterilized are fed through the Un-scrambler and suitably guided on the moving delrin flat conveyor belt at the required speed of the correct placement below powder wheel. The sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one. The filled container is immediately separated on the conveyor by vial separator and moves further for Stoppering operation. (Different grooves separator can be used which depends on the container diameter or multiple dosing systems). The sterilized, siliconised, rubber stoppers stored in the vibrator bowl moves to vibratory bowl and stacked vertically in the rubber stopper chute. The container is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further the container is passed between two pressing roller for tight fit fixing of rubber stopper.

• Driven Type: Electric
• Voltage: 440 V
• Usage/Application: Dry Powder Filling
• Material: Stainless Steel
• Number Of Filling Heads: 1
• Capacity: 120 bottle/min
• Power Consumption: 1.5 HP
• Automation Grade: Automatic
• Frequency: 50 Hz
• Phase: Three Phase

Our company offers Powder Filling Machine, which has a container that is available with the diameter of 25 mm to 75 mm and a height of 55 mm to 120 mm. It is equipped with powder hopper made out of stainless steel 3161 and has a weight of 5kgs. These Powder Filling Machine have a power specification of 1.5 H.P, 440 volts, 3 phase, 4 wire system and 50 hz. We ensure their long service life and easy to use features without any maintenance for years.

Harsiddh auger type filling machines provide exceptional powder filling operations to pharmaceuticals, food, biotech and agricultural firms. Both single and double auger types are robust and made in to international quality specifications. They are manufactured using corrosion free, high quality stainless steels that makes the equipment durable and enable aseptic and contamination free filling. Our machines are CE certified and require little maintenance and able to provide high value and long service life. Both single and double head systems are designed to maximize production output and are able to fill varying containers ranging from 5 -200 grams. They handle a wide range powders ranging from fine to granulated types. Parts are easily interchangeable and this reduces change over time while increasing flexibility and output. They incorporate sensors to prevent powder filling when the container is not there. The single auger type has a throughput of 20 – 40 bottles per minute while the double head fills 30-80 bottles per minute. The operation process ensures great accuracy and wastage free filling. Dry sterile bottles are fed to the system using a conveyor belt. They then move to the feed turn table. Upon reaching the filling section, they are clamped and magnetic clutch rotates the auger so as to release a predetermined quantity.   Salient Features   Compact design. Filling accuracy between +/- 1-2% in single dose. The outer body is covered with SS sheet. All the contacting parts of the auger powder filling machine are made up of SS316L. Considerably restrained change in changeable machine parts. Filling capacity from 5 grams to 200 grams with help of change parts. No container No Fill systems. A unit can fill multiplicity of fine and granulated powder and can be used for various types of containers. Servo motor for accurate and timely filling.

• Application: Powder Filling
• Power: 1-3kw
• Voltage: 330 V
• Automatic Grade: Semi-Automatic
• Material: Stainless Steel
• Driven: Electric

• Capacity: 40 Bottle Per Minute
• Driven Type: Mechanical
• Material: Stainless Steel
• Model Name/Number: AEPF 40 Bottles Only
• Number Of Filling Heads: 1
• Power Consumption: 3 Phase