Power Tools Dealers in Gulbai Tekra, Ahmedabad

fauji-140 is a manually controlled and fauji-140r is fully remote controlled, hydraulic and self-propelled drilling unit on a 4 wheel drive carrier. Typical applications for fauji-140 are foundation drilling, road cutting, trenching, bolting, line drilling in dimensional stone quarries, and other special drilling applications. Therefore fauji -140 is most often used by construction contractors, mines and quarries and the municipal sector. Due to its versatility fauji-140 is often included in the equipment fleet of rental houses as well.standard components rock drill : hydraulic chain feed : incl. One set of jaws rod rack : on the carrier boom : articulated carrier : rubber-tyred powerpack : diesel driven, hydraulic pumps and on-board compressor hydraulic system : open center control system : integrated, radio remote controlled dust collector : hydraulic working lights :  6 pcs hydraulic jacks 4 pcs eu-safety devices service light, alarm signal, alarm beacon selection of options spirit level angle indicator feed angle measuring system feed angle and depth measuring system feed angle measuring and aligning system kit for alternative steels, each biodegradable hydraulic oil central lubrication system lincoln chain tracks electric fuel filling pump hydraulic winch manual fuel filling pump exhaust gas purifier fuel powered heater for engine shut down of suction for water holes water flushing kit without water pump water pump for water flushing kit grinder steel wearing strips for chain feed special tools for hydraulic drifter first service kit for fauji-140 extra manuals technical specification weight (without options) 3150 kg width 1.85 m height 2.45 m total length 4.7 m

25MM Heavy Duty Type Bench Drilling Machaine Hight 4.5 fit Center between piller to spindle is 9.5 inches SG iron gear ,Solid spindle ,Digree table,Total 8 speed machine Brand name K.R.PANCHAL & CO

• Type: Grease Guns
• Application: Industrial Use
• Condition: New
• Brand Name: Groz
• Country of Origin: India

Ideal for use in factory maintenance, agricultural applications, fleet service or for use on trucks connected to vehicle air brake compressorsAir Operating Range40 120 PSI (3-8 BAR)Pressure Ratio40:1Air Compressor Volume1 cfm / 0.026 cubic metre and above Air Inlet Threaded1/4 (F)

• Country of Origin: India
• Type: Industrial Air Blower
• Application: Industrial Use
• Weight: 0-10kg, 10-30kg, 30-50kg, 50-70kg, 70-100kg
• Color: Black, Blue, Brown, Green, Sky Blue, White, Yellow
• Voltage: 110V, 220V, 240V, 440V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Rated Power: 1-3kw, 12-15kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year
• Presssure: High Pressure, Low Pressure, Medium Pressure
• Brand Name: AS Engineers
• After-Sales Service Provided: yes

We are offering all types of power saw blades. We have ready stock of all size in miranda make. Hss as well as bi metal item are available.

• Material: Steel
• Application: Industrial
• Color: Black-grey, Metallic
• Condition: New
• Finishing: Polished
• Brand Name: Bosch

We are a credible Supplier of Bosch Power Tool & Accessories, operating from Ahmedabad, Gujarat. Under this range, we offer Bosch Hole Saws, Bosch Router Bits and Bosch Circular Cutter Blade. As the name suggests, these Bosch Power Tool & Accessories belong to the well-known brand Bosch, which signifies their credibility and reliability. Bosch Power Tool & Accessories are intended to be used for different Bosch cutting and drilling.

• Capacity: Upto 125 linear/meter/hour
• Hole Diameter: 28 - 45 mm

Application :  Marbel Granite Sandstone   Drilling Method :  Tophammer Granite Sandstone

• Brand Name: Karnavati
• Function: Polishing
• Style: Hand Held
• Raw Material: Nylon
• Bristle Stiffness: Hard
• Colour: Blue
• Handle: Wooden

• Feature: High quality, durability, corrosion resistance and excellent finish

We are offering centrifugal blower. Centrifugal fan from 1000 - 2,50,000 cmh capacity & 20 - 200 mm wc static head. We can also offer fans from ms / ss / frp constructions.

• Material: Aluminium
• Usage/Application: Automotive Industry
• Diameter: 10 inch
• Voltage: 240 V
• Frequency: 50 Hz
• Speed: 1440 RPM

• Warranty: 6 months
• No Load Speed: 12000rpm
• Weight: 1.92 kg
• Power Consumption: 8 CFM
• Disc Diameter: 6 inch
• Model Name/Number: 4151 HL
• Brand: Ingersoll Rand
• Sander Type: pnuematic
• Usage/Application: workswhop
• Air Consumption: 8 CFM
• Air Inlet: 1/4
• Length: 190 mm
• Free Speed Air Consumption: 0.15
• Switch Type: push Button
• Wheel Diameter: 3/16
• I Deal In: New Only

• Material: Iron
• Country of Origin: Country of Origin
• Brand Name: RAJPACK
• Model Name/Number: RAJDC
• Size: 12 mm - 16 mm
• Automation Grade: Semi Automatic
• Weight: 3.5 KG
•  :  

The Hot Air Blower is a heavy duty, industrial quality and portable device. It is available in three different temperature ranges of 150°C, 260°C and 400°C, having power rating of 1200 W, 1680 W and 2160 W respectively. 

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. This test is used to determine the compressive strength of a concrete core, which has usually been extracted from an existing structure. The value of compressive strength can then be used in conjunction with other measured properties to assess the condition of the concrete. Extraction of concrete cores, achieved by rotary drilling using a diamond tipped hollow barrel, serve as a means of taking a sample of concrete which can then be used to determine various physical properties, but most commonly compressive strength.Cores can generally be extracted from wherever access allows, and would include floor slabs, walls and columns. 10cm diameter cores, generally afford the minimum diameter required for a representative sample and require less reinstatement than larger diameter cores. 15cm diameter cores will generally give more representative samples than smaller diameters but require more reinstatement. General Descripation & Specifications As per leaflet Optional Accessories (At extra cost) Diamond Impregnated core drills of required dia and length, Masonry core cutter, Grinding and Lapping Machine

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. This test is used to determine the compressive strength of a concrete core, which has usually been extracted from an existing structure. The value of compressive strength can then be used in conjunction with other measured properties to assess the condition of the concrete. Extraction of concrete cores, achieved by rotary drilling using a diamond tipped hollow barrel, serve as a means of taking a sample of concrete which can then be used to determine various physical properties, but most commonly compressive strength.Cores can generally be extracted from wherever access allows, and would include floor slabs, walls and columns. 10cm diameter cores, generally afford the minimum diameter required for a representative sample and require less reinstatement than larger diameter cores. 15cm diameter cores will generally give more representative samples than smaller diameters but require more reinstatement. General Descripation & Specifications As per leaflet Optional Accessories (At extra cost) Diamond Impregnated core drills of required dia and length, Masonry core cutter, Grinding and Lapping Machine

• Material: Stainless Steel
• Brand Name: Austeofix
• Standard: SS304
• Finish: Chrome Finish
• Size: 225 mm

• Brand Name: BH
• Model Name/Number: BH-901
• Material: SS
• Usage/Application: NEURO SURGERY

• Type: Screw Driver Drill
• Features: Compact design,Lightweight,Easy to use
• Weight: 1-2Kg, 2-4Kg
• Driven Type: Electric,Battery
• Color: White, Grey, Red, Other
• Condition: New,Old
• Drilling Diameter: 0-5mm, 5-10mm, 10-15mm

• Type: Electric
• Brand Name: HALL
• Sterilization: 155 Degree Celcius
• Power Output: Upto 90 W
• Speed: 0-630 rpm

• Brand Name: Polytech

We offer best quality & heavy duty 19 mm capacity drilling machine which is widely used in all engineering industries as well as chemical, plastic, textile, automobile, fabrication etc. for different operations i.e. drilling, tapping, boring, counter boring, reaming, honing etc. we are leading and one of the oldest manufacturers of full range of drilling machines from 13 mm to 38 mm with various models and sizes located in ahmedabad (gujarat india). we supply drilling machines to all over india and abroad. all important parts of machine is made from the best quality material and best finish. all spares are readily available for replacement even after long span of usage.

hss hacksaw blade, Bimetal Bandsaw Blades

• Nozzle Size: 1.4 mm
• Body Material: Plastic
• Country of Origin: Made in India
• Brand: PINTEX

Segmented Diamond Saw Blade, convolute wheels, cloth discs

Chain Saw Machine, waste picker, snake catcher stick, quick planter

Miter Saw, Table Saw, Hammer, Rotary Hammer, Wall Chaser

Tile Cutter, saw, angle polisher, Impact Drill, Rotary Hammer Drill

Vishva Exim is a widely prominent and popular name in the field of manufacturing and supplying varied range of blades in India.