Press Brakes Dealers in Ahmedabad

WE are manufacturer of Hydraulic Press Brake machine and shearing machine all Models are available like Manual Hydraulic Press Brake, NC press brake, cnc press brake, hydraulic shearing machine, NC hydraulic shearing machine

• Country of Origin: India
• Type: Hydraulic Brake Press
• Certification: CE Certified
• Application: Bending Sheet

AMAVI Brand CNC NC Hydraulic Press Brake Capacity 65 ton to 600 ton Length 6000mm 

Frame Is Made of steel fabricated construction of interlocked robust design, machines are constructed with safeguard against undesired deflections and breakage. The frame distributes the stresses, supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidity, alignment, accuracy and keeps frames structure at right angles to the bed.These tools include features like higher accuracy, better speed and minimum wear and tear. Our rugged, user friendly and durable instrument for pressing are easy to operate. They are vibration free and noiseless. We provide several models that suit our customer's requirements. These press brakes are commonly used in various industrial segments.

Technik series hydraulic press brake ton capacity from : 20 to 400 ton length : 1500 to 4000mm accurate & precise machine for your toolroom.

• Range:: 20MT to 600MT |
• Length:: 1250 mm to 7000 mm

NC hydraulic Press brakes are economical and very reliable solution for industry demand. NC hydraulic press brakes are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen.The Numeric Control is used for Two Axis Control,1. Ram Axis Y      2. Back Gauge Axis X.The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive. Product Features It has a facility to program the variegated jobs includes complex bending sequence. This facility helps to perform complicated bending job in a signal setting and repeatable production. Dedicated controller with LCD monochrome screen & numeric keypad. Bend angle & Depth Mode program. 128 Programs x 16 bends per program can be stored. Stroke control and stroke counter on screen. Highly Precise press brake scale for accurate Y- axis positioning. AC Servo drive for back gauge positioning. Hardened ground Balls screwand linear motion bearing for better position accuracy and longer life. Ram tilting to maintain banding accuracy over period.

Capacities from 200 T to 1000 T. Conventional CNC controls can be offered. Fabricated steel structure fully stress relieved.Hydraulic elements of reputed make.

• Brand Name: JEKSHINE
• Raw Material: Hydraulic Press Brakes
• Driven Type: Hydraulic
• Bending Material: MILD STEEL, STAINLESS STEEL
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic

We are well known for exporting of wide variety of Hyd.Press Brake

• Country of Origin: India
• Type: Hydraulic Press Brake
• Brand Name: AMAVI
• Certification: ISO 9001:2008 Certified
• Color: Blue,Brown,Grey,Light White,Sky Blue,White
• Voltage: Other
• Condition: New
• Warranty: 1 Year
• Operating Mode: Semi Automatic
• Power: Other
• Usage: Sheet Bending

NC hydraulic Press brakes are economical and very reliable solution for industry demand. NC hydraulic press brakes are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen.The Numeric Control is used for Two Axis Control,1. Ram Axis Y      2. Back Gauge Axis X.The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive. Product Features It has a facility to program the variegated jobs includes complex bending sequence. This facility helps to perform complicated bending job in a signal setting and repeatable production. Dedicated controller with LCD monochrome screen & numeric keypad. Bend angle & Depth Mode program. 128 Programs x 16 bends per program can be stored. Stroke control and stroke counter on screen. Highly Precise press brake scale for accurate Y- axis positioning. AC Servo drive for back gauge positioning. Hardened ground Balls screwand linear motion bearing for better position accuracy and longer life. Ram tilting to maintain banding accuracy over period.

Standard Feature Accessories:• Main drive standard make motor• Electrical control panel with three speed inch,single cycle,Auto mode of operation.• Two front sheet supports• Manual back gauge with micro-adjusment swing stoppers. pair of lifting chains.• fine stroke adjustment rod with limit switches.• One suitable 5 way die and blade. • (segmented ofr full length,EN-9 not covered under warranty)• moveble console with emergency stop.• Tonnage indicating - adjustment device.• Manual centralized lubrication system with hand pump.• bending chart. Feature: • Mono Block Welded Steel Frame ultra tested-2062• steel plates rigid to provide Accurate bending.• All pivots have hardened of ground pin bushes of five• piece guide slide lubricated by central hand pump• Repetitive accuracy is within +0.03mm Ram travel parallelism with out using sensitive & complex servo Hydraulics.• Most reliable Hydraulic components & sealing for international reputed design for 350 bar against operating pressire of 160 bar maximum.• Three cycles operation inch,Single cycle&Auto for grater operator convenience.• Three speed operation reduces ideal travel time which improves productivity.• Bending force easily adjustable From front for forgue tool of bending material.

Cnc hydraulic press brake machine with highly bending accuracy. Hydraulic system with proportional control valves. Cnc controlled back gauge system with ball screws. Manually adjustable buack gauge heads (2 nos.) for axes "R" and "Z". There is highly accurate tooling used for accurate bending. Main drive motor. Electrical control cabinet. Pair of lifting links. Pair of sheet supports. One suitable 2 way die and universal upper blade (segmented) - hardened and ground (not covered under warranty).

• Brand Name: JEKSHINE
• Automatic Grade: Automatic
• Application: Sheet Bending
• Country of Origin: Made in India
• features: Mono Block Welded Steel Frame ultra tested-2062, steel plates rigid to provide Accurate bending.
• Control Type: Non-CNC
• Size: 1500
• Cutting Load: >150 ton
• Max Sheet Width: 3 meter
• Material: ms /ss

• Type: Hydraulic Press Brakes
• Condition: New
• Driven Type: Hydraulic

NC hydraulic Press brakes are economical and very reliable solution for industry demand. NC hydraulic press brakes are designed to give more accuracy and better productivity. The controller has a facility to program the various jobs with complex bending sequence on screen. The Numeric Control is used for Two Axis Control, 1. Ram Axis Y 2. Back Gauge Axis X. The program gives facility to bend different bending degrees; different back gauge positions & different open positions. It has a facility to save different programs and same can be reloaded as & when required. The back gauge consists of Flip-top Fingers, Ball Screw & Linear Bearing along with drive. Range: 20MT to 600MT | Length: 1250 mm to 7000 mm

Sailent Features 3 Axis machine (Y1-Y2 & X Axis) with automatic, accurate & fast back guage. Designed to meet precise bending requirement with low investment Use friendly and uncompromised quality with cost effectively solutions. S525 press brake controller from ESA Italy or equivalent. Ultrasonically tested IS 2062 grade robust steel structure. Back guage assembly included Ball Screw AC Servo Drive

• Country of Origin: Made in India
• Application: Sheet Bending
• Brand Name: Sunshine
• Features: Manual and Motorized Both Crowing System Option , Quick Relese Clamp for Tooling
• Item Code: CNCPBR
• Control Type: CNC
• Size: 1000mm to 6000mm Bed Size
• Model Name/Number: CNC PBR 1032, CNC PBR 1032
• Capacity: 100 Ton
• Layout: Horizontal
• Max Sheet Width: Up to 6 Meter
• Range X Axis: 500mm

• Voltage: 380 V
• Usage/Application: Industrial
• Control Type: Hydraulic
• Cutting Load: 100 Ton
• Automation Grade: Automatic
• Material: MS
• Frequency: 50 Hz
• Phase: Three Phase
• Finishing: Paint Coated

Standard Supply:   Main Drive Motors Standard 'v' Block Pair of Foot Swishers Electric Control Panel "INCH" & "SINGLE CYCLE", "DOUBLE CYCLE","AUTO" mode of Operation Fine Stroke adjustments Rod with Limit Switches.   Machine Capacity (MS)   1 mm to 1.6 mm 3.25 mm 5 mm 6 mm 8 mm 10 mm   Machine Length   1500mm to 3050mm Length

• Automatic Grade: Automatic and Manual
• Machine Type: Press Brake, Bending Machine
• Condition: New
• After-Sales Service Provided: Engineers available to service machinery overseas
• Power: Cnc
• Certification: ISO 9001 2000, ISO / CE Certified Comopany
• Packaging Details: Depending on Customer's Requirements.
• Supply Ability: 10 Unit/Units per Month
• Place of Origin: Gujarat, India
• Service: 24/7 Technical Support
• Model Number: PBS Series
• Port: India
• Extra Services: N/A