Pressure Filter Dealers in Amraiwadi, Ahmedabad

• Country of Origin: India
• Type: Stainless Steel Bag Filter Housings
• Material: Stainless Steel
• Application: Filteration Use
• Weight: 1-2kg
• Color: Grey
• Finishing: Polished
• Pressure: High Pressure

Stainless Steel Bag Filter Housing is a type of industrial filter housing designed to hold and support bag filters. It is commonly used in various industries such as chemical, pharmaceutical, food and beverage, and water treatment for the filtration of liquids.

Very Economics design. At High Contamination Level , Pre-Filter is used. Bag filter is very Affordable Pre-Filter & many times it also used as a Final Filter. Advantage of Bag Filters High Solids Collection Capacity Easy In Maiontain, Reduces Manpower Low Cost Operation Contaminant Retained In Bag Is Easy In Disposal High Efficiency & Performance Bag Filter Housing We use polypropylene or polyester for manufacturing Bags. Commonly, woven materials are used to make bags. Fine Filtration non woven media is preferred for use. We also supply heat-sealed hand bags colored with polypropylene color. We use color for holding on the bag in house. The direction of filtration is from in to out. Fluid comes into your bag from the top of housing and this fluid is paased through perforated cylinder from bag. When bag will be full of contamination, it is must to clean that bag by taking out from housing or exchange with newer one. We manufacture Bag Filter Housing with the standard size as 7”x33” and 7” x 14”. we also produce customized Bag Filters as per the pre-requirements of our clients. We can use Multi Bag Filter if there is high flow rate. Our general bags are available in the size of 5 to 100 micron.

We are offering gas pressure regulator, gas filter. Energy combustion, ahmedabad a local source of all types of tecnogas make products. we are distributor of all types of tecnogas make gas pressure regulator rg series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 2 bar and 5 bar gas filter fm series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 6 bar slum shut off valve mvb series size:-2" and 3" safety relief valve mvs series size:-1" gas solenoid valve evp series size:-2" and 3" and all other products are available like pressure switch,pressure gauge attachment, diaphragm etc.

• Color: Orange, Red
• Shape: Round
• Brand: Chicago Pneumatic
• Filter Type: Air filter
• Compressor Type: Screw Compressor
• Weight : 2 kg
• Max Temperature: 30 Degree C
• Height : 200 mm
• Packaging Type: Box Packing

These filter holders are GMP Complying. The Holders are made of AISI 316L stainless steel. Provided with Bubble Test arrangement. Filter support screen with Teflon Silicon ‘O’ring. Detachable Stand.Membrane Filter, Membrane Filter Holder, Membrane Filter Manufaturer

MEMBTRANE FILTER HOLDER SPECIFICATION:  Made out of S.S.316 quality S.S., suitable for filtration of sterile liquids. The unit is provided with TWO silicon gaskets support screen with non-sticking mirror finish with bolts & wing nuts.  An air escape valve is also fitted to remove inside air.  Stainless Steel parts polished as matt finish by 120 grit.  Complete as per our standard specification Size: 142 mm. dia. with bubble test arrangement. Size: 293 mm. dia. with bubble test arrangement.

Techno-Filt International is Manufacturer and Supplier of Bag Filter in India. The durable and cost-effective filter vessel is resistant to a comprehensive range of chemicals It allows the user to choose the filter media and supply accurately to fit their specific requirements. Our company is the leading exporter of bag filter housings. Original innovations have been the logic for a vastly varied range of vessels to meet the high demanding as well as standard uses from single to multibag housings, stainless steel to engineered plastic vessels. The advantages of bag filters are – High solids collection capacity. Easy change out saves manpower, Cheapest solution, Contaminant retained in bag is easy for disposal, Minimum loss of processing fluids etc. Bags are made from polypropylene or polyester. Usually woven material is used for making bags. For finer filtration non-woven media is superior. It is accurately stitched at the joints and the top rubber color. Color is used to hold the bag in the housing as shown here in the picture. A dispenser is inserted in to the bag housing to hold the bag and avoid by-pass. The bag is rested on perforated cylinder. The filtration is in to out in bag filter. Fluid enters from the top of the housing in to the bag. Contamination retains on the bag and clear fluid passes from bag through perforated cylinder. Once bag is full of contamination, one wants to clean it by taking it out from the housing or replace it with different one. Regular size of the bags is 7″ x 33″ and 7″ x 14″. However it can be made of any size as per the necessity. In case of high flow rate, multi bag housing can be provided to take care of the flow. Standard bags are accessible from 5 to 100 micron cut-off range.

Highly Efficiency Filtration Device FILTER PRESS Automatic Shaking Filter Press, Hydraulic Closing Type Filter Press, Manual Type Filter Press

• Diameter: 8"
• Capacity: 400

The unfiltered liquid is fed into the filter under positive pressure, where liquid travels in downwards direction and finds its way through opening on sides of the Filter Plates. As the liquid pressure increases, the Filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet. Filtration is continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance. Horizontal Plate Filter Press is enclosed construction, preventing evaporation, oxidation, leakage and fumes escaping from product.Filter plates are available in two sizes. Deep plate for large percentage of cake holding capacity and Shallow plate for small percentage of cake holding capacity.The horizontal filter plate and even thickness of cake, prevents the cake dropping as well as cracking, thus assuring better filtrate quality.The Filtration area and cake holding capacity can be increased or decreased according to requirement.

• Brand Name: Chamunda
• Automatic Grade: Manual
• Usage/Application: ETP
• Filtration Capacity: 500-1000 litres/hr
• Frame Type: M S
• No Of Plates: 10-20

• Color: Silver
• Power: 1-3kw
• Weight: 100-200kg
• Automatic Grade: Semi Automatic
• Driven Type: Electric

filter size for 8x6,.

• Type: Filter Press
• Color: Silver
• Application: Liquids
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric

Features:   GMP model stands on SS trolley Manufactured using quality raw material such as S.S. 304/316/316L M.O.C Available in various sizes and different diameters having numerous number of plates It also provides the Back wash facility for continuous operations. Two filter plates are available – Deep and Shallow The horizontal filter plates prevent the cake dropping from the shell.   Application Area : Pharmaceutical Industries Chemical Industries Food Processing Industries Cement Industries Distillation Plants Oil Industries Dairy Industries Paint Industries Beverages  

Our organization is instrumental in offering a wide gamut of Sandwich Type Candle Filter Pack manufactured as par the industry set quality parameters. Our corrosion resistant, optimum performance and highly reliable range is catering to various industrial applications. We provide this range in various designs and specifications, with the aim to cope up with the distinctive requirements of our customers. With firm commitment to quality, we are engaged in offering a wide range of Sandwich Type Candle Filter Pack. This range is manufactured making use of optimum-grade raw-material. Manufactured in adherence with the international quality parameters, we are offering this range in various mesh combinations, diameters and lengths.

Filter Press Function   Filter Presses in principal are pressure filters in where a filters pack comprising of a series of plates and frames or chamber plates in compressed between one fixed and one movable bulk head on the other end. The filter media is placed between each individual element. A pair of filter plates when closed form a cavity internally covered on all both sides by the filtering medium. Slurry with uniform distribution of finely dispersed solids in liquid is introduced under pressure in this cavity. Liquid passes out and solids with remaining discharged through a closed pipe formed in the plates or is passed out into open channel through externally mounted cocks. Once the filter cake is fully pressed and filtrate trickles out, the cake can be washed to remove any impurities and the cake can be further dried. Thus solid-liquid separation of a slurry is achieved leaving a filter cake in the cavity are directed through specially devised nozzles fitted in the fixed end. Cake which has built in the hollow space between the plates will fall our once the pack is opened.

Everybody wants to have clean and pollution free air around, and since industries are more responsible for Air pollution. We combat this section. There are several varieties of Bag Filter A Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector systemconsists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners which use disposable filters to remove dust. In reverse-pulse-jet Bag Houses, individual bags are supported by a metal cage (filter cage), which is fastened onto a cell plate at the top of the Bag Houses. Dirty gas enters from the bottom of the Bag Houses and flows from outside to inside the bags. The metal cage prevents collapse of the bag. Bags are cleaned by a short burst of compressed air injected through a common manifold over a row of bags. The compressed air is accelerated by a venturi nozzle mounted at the Reverse-Jet Bag Houses top of the bag. Since the duration of the compressed-air burst is short (0.1s), it acts as a rapidly moving air bubble, traveling through the entire length of the bag and causing the bag surfaces to flex. This flexing of the bags breaks the dust cake, and the dislodged dust falls into a storage hopper below. Reverse-pulse-jet Dust Collectors can be operated continuously and cleaned without interruption of flow because the burst of compressed air is very small compared with the total volume of dusty air through the collector. Because of this continuous-cleaning feature, reverse-jet dust collectors are usually not compartmentalized. The short cleaning cycle of reverse-jet collectors reduces recirculation and redeposit of dust. These collectors provide more complete cleaning and reconditioning of bags than shaker or reverse-air cleaning methods. Also, the continuous-cleaning feature allows them to operate at higher air-to-cloth ratios, so the space requirements are lower. This cleaning system works with the help of digital sequential timer attached to the fabric filter. This timer indicates the solenoid valve to inject the air to the blow pipe.  

APPLICATION & PROCESS : The filter press is a solid liquid separation device using the principle of pressure feeding. It is highly efficient, compact, dewatering device for separating solids from liquid slurries in the form of compressed cake. It has wide range of applications by several industries like Pharma, bulk drugs, distilleries, beverages & other industries. The unfiltered liquid is fed into the filter under positive pressure, where liquid travels in downwards direction and finds its way through opening on sides of the Filter Plates. As the liquid pressure increases, the Filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet. Filtration is continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance. SALIENT FEATURES : Design is cGMP with all contact parts AISI 316L. Complete filtration of the batch without any hold up due to reverse flow of liquid. The cake, filtered & solids remain totally enclosed allowing filtration of toxic, hazardous & explosive liquids. No contamination of internal surface of shell. The top dome structure ensures fast & easy removal of cartridge assembly & cleaning of cake. Skid type unit with castor wheel.

Everybody wants to have clean and pollution free air around, and since industries are more responsible for Air pollution. We combat this section. There are several varieties of Bag Filter   A Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners which use disposable filters to remove dust.   In reverse-pulse-jet Bag Houses, individual bags are supported by a metal cage (filter cage), which is fastened onto a cell plate at the top of the Bag Houses. Dirty gas enters from the bottom of the Bag Houses and flows from outside to inside the bags. The metal cage prevents collapse of the bag.   Bags are cleaned by a short burst of compressed air injected through a common manifold over a row of bags. The compressed air is accelerated by a venturi nozzle mounted at the Reverse-Jet Bag Houses top of the bag. Since the duration of the compressed-air burst is short (0.1s), it acts as a rapidly moving air bubble, traveling through the entire length of the bag and causing the bag surfaces to flex. This flexing of the bags breaks the dust cake, and the dislodged dust falls into a storage hopper below.   Reverse-pulse-jet Dust Collectors can be operated continuously and cleaned without interruption of flow because the burst of compressed air is very small compared with the total volume of dusty air through the collector. Because of this continuous-cleaning feature, reverse-jet dust collectors are usually not compartmentalized.   The short cleaning cycle of reverse-jet collectors reduces recirculation and redeposit of dust. These collectors provide more complete cleaning and reconditioning of bags than shaker or reverse-air cleaning methods. Also, the continuous-cleaning feature allows them to operate at higher air-to-cloth ratios, so the space requirements are lower.   This cleaning system works with the help of digital sequential timer attached to the fabric filter. This timer indicates the solenoid valve to inject the air to the blow pipe.

TECHNICAL SPECIFICATION:-   Available in varying size of 8”/ 14”/ 18”/ 24” dia of plate with various combination of on of plates. Reverse flow design for practically zero hold-up. Offered on common skid with filter aid dosing system. Shell thickness is suitable to withstand higher pressure for long time. Diaphragm type SS 316 / SS 304 pressure gauge. Suitable pump can be integral part of the assembly.  

• Size: 4"X20", 7"X16", 7"X32" & 7"X42"
• Media: Polypropylene
• Micron: 0.5 To 50

Inside the bag filtration system,the filter bag is supported by an inside metal basket.The incoming fluid is to flow out after filtered by the bag,thus the impurity is intercepted in the filter bag.You can continue to use the filter system after changing the filter bag.It is a trend for the bag filter to replace partly the cartridge filter.The small filter bag can filter large amount of liquid. The filter bag is key to filtering.According to the result of research from a famous company, for over 10 years,filter bags have been a critical component of filtration systems worldwide.

• Model: MM- FP     8” dia x 6 Plates
• No. of Plates: 6 Nos.
• Height of Plates: 25mm
• Thickness of Plates: 18 swg
• Shell Thickness: 1.6mm
• Bottom Plate: 6mm
• Scavenger Plate: 10mm thick
• Top Lid: 1.6mm with skirt ring
• Support Screen: 7 Nos. of 1.2mm thk
• Interlocking Cup: 7 nos.
• M.O.C.: S.A.240 Gr. S.S.  304 / 316/316L quality.
• Filtering Area: 0.209 m2.
• Cake Holding Cap.: 4.78 Ltrs.
• Output*: 400 – 600 * Ltrs/hr.
• Pump: ½ ” Centrifugal pump with TC V/S TC Seal and coupled to 1 HP 3 phase 1400 rpm NFLP motor
• Gasket: Neoprene/Silicon.      
• Nozzles                        Inlet: ¾” NB
• Nozzles                        Outlet: ½” NB
• Airvent: ¼” BSP
• Dial type Pressure Guage: ¼” BSP – 7Kg
• End Connection: Nozzle type.
• Surface Finish: Mirror polished.
• Trolley: SS304 trolley with SS Bracket, fibre castor wheels
• Dimensions: 840x535x895 Approx

• Warranty: 1 Year Manufacturing Warranty
• Voltage: 440 Volts
• Condition: New
• Place of Origin: Gujarat, India
• Supply Ability: 3 Unit/Units per Month
• Power(W): 1 H.P.
• Packaging Details: Product & Transport Worthy Wooden Packing
• Weight: 700 kgs.
• Model Number: AFS-100
• Production Capacity: All Sizes

We offer to the customers a high quality of Nutsche Filter which is used for separating the solid from the liquid. These Nutsche Filters are prepared are available in varied capacities, models and sizes. The Nutsche Filters are widely used across various applications areas such as dye chemicals - dyestuffs, pigments, intermediates and chemicals - basic chemicals, organic inorganic, phosphoric compounds, resin, and marine chemicals.

• Material: Cast Iron
• Diameter: 60 to 120 mm
• Media: Water
• Pressure: 100 Bar
• Operating Temperature: 150 Deg C

• Country of Origin: Made in India
• Automatic Grade: Fully Automatic
• Bag Material: PP / HDPE Woven
• Folding Device: Single / Double Fold
• Automation: Mitsubishi Only
• Capacity: 30 - 40 Bags per Minute

Air Filter Bags, air pleated bags, liquid filter products

Belt Filter Press, Ceramic, Pp Filter Press, Press Machines

Hydraulic Filters, Stainless Steel Filters, liquid filter, Hydraulic Filter