Pressure Filter Dealers in Ellisbridge, Ahmedabad (19 products available)

• Type: Automatic
• Condition: New
• Warranty: 1 Year
• Voltage: 320 V
• Power: 5 Kw
• Weight: 50-100 Kg

The initial operation of a membrane filter press is identical to that of its recessed chamber counterpart.   However once the filtration cycle is complete and final filtration pressure is achieved the feed into the filter press is stopped.   At this point the plates within the Filter Press can be inflated using either air or hydraulic pressure to exert a mechanical force on the filter cake retained in the chamber.   The effect of the squeeze is to physically compress the filter cake and force out additional moisture held within the cake giving a drier end result.   Membrane filter plates are used to   Reduce filter cake moisture content Reduce filtration cycle time Improve cake washing   This style of filter plate can be installed as   A full plate pack Alternately in conjunction with recessed companion plates as a more economical option.   Because of its simplicity and flexibility, the chamber Filter Press has been widely applied in clarification and dewatering applications. Membrane Filter Press technology is gaining increased acceptance because it reduces subsequent processing or disposal costs for filter cake. In many applications the membrane Filter Press significantly reduces residual moisture content, making this technology attractive for new plants and for upgrading existing facilities. In both cases the careful selection of plate and membrane materials is essential to the successful performance of the process.   Membrane Filter Press Plates have a chamber below the drainage surface that can be inflated. The common method used is water pressure, which is generated by pumping into the squeeze cavity to inflate the face of the plate against the filter cake. Membrane Plates are used to reduce the cake moisture content & shorten the filtration cycle time.   Mix Pack Membrane are the most common configuration (one recessed plate then one membrane plate alternate in the press plate pack). Membrane Plates usually operate at a feed pressure of up to 7 bar and squeeze pressure up to 15 bar. Special plates can be designed for higher feed & squeeze pressure.   Replaceable membranes can easily changeable. EPDM thermoplastic and other compounds are used for specific conditions. Plate filling problems are minimized and use of a rubber Membrane enables “empty-chamber” operation without damaging the plate, resulting a considerable reduction in incidents of plate failure. Even if the chamber is not completely filled, the filter cake is squeezed by the inflating filter lever and therefore perfectly dewatered.   During the initial phase of the filtration cycle, so-called “fill and filtration” the process is similar to the chamber Filter Press. After reaching a predefined pressure, usually around 3 - 7 bar, depending on the sludge characteristics, sludge feeding is stopped & the rubber membranes inflated, using either water or air as squeeze medium. The cake is hereby compressed and dewatered further. Then the squeeze medium is relieved & the cake discharged.

Porex® Tubular Membrane Filter (TMF) modules contain the unique, patent-pending, structural membrane tubes. The superior strength of the membrane/substrate composite allows higher operating and backwash pressures for higher flux and reduced system footprint. The structural composite membrane features PVDF membrane bonded to PVDF substrate or anchored to PE substrate.   Features : Higher pressure resistance Increased flux Reduced system size Improved back pulse efficiency FDA and NSF Approved   Typical Applications : Heavy metal removal in metal finishing fluids Pre-reverse osmosis filters for water treatment High solids removal in electroplating solution baths High solids removal from completion fluids Food and beverage processing Cutting fluids recycling in silica grinding and slicing Heavy metal removal from incinerator scrubber water Cooling tower blow-down recycling and/or side stream filtration Brine recycling in water treatment systems Wastewater processing from the chemical, micro-electronics and pulp and paper Industries.

We are offering Bag Filter System BFS - 01. Ami Enterprises is a well-known Bag Filter System manufacturer, offering bag filter system. When it comes to bag filter wholesale then we are enumerated on the top rank. We bring bag filtration system which strictly works on the state-of-the-art technology. You will be pleased to hear that we offer Filter Bag , Bag Filter Housing with Duplex System also, at the most pocket friendly price. Technical Data We are manufacturing Bag Filter Housings for specific requirement as per ASME Sec VIII, Div I. We also providing the SS Housings with Electro polishing. The Operating pressure capacity is : 7 kg to 10 kg and above (Depend on Filter Bag capacity) The High Temperature withstand capacity. Provision of different type of Tope Closing like : Clamp Type , Plate Type , Flange Type and also “ Davit Arm ” system Type. Available Different Size Diameter : 4” , 7” etc. Long : 16” , 20” , 32” etc. Accommodation : Single , 3 , 5 , 7 , 9 , 12 etc. Housing Connection : Flange Type, Thread Type, Hose End Connection. We can also provide you the Filter Housing with “ Davit Arm ” System We are specialized in Simplex / Duplex Type Housings. For High Flow rates , use the optional 90 C elbow to manifold or duplex two housings. We are also giving the Housings with Rubber Lining. Make Of Construction Carbon Steel, Polypropylene, Stainless Steel : 304 , 316 , 316 L Application Facility Recycling, Petrochemical Industry, Pharmaceutical Industry, Beverage Industry, Wine, Semiconductor, Ro / UF Ultra pure water & Optoelectronics.

• Color: Transparent
• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: Gopani
• Vessel Height: 500-800 mm
• Flow Rate: 500-1000 m
• Vessel Diameter: 200-400 mm
•  :  

Filter Concept Pvt. Ltd. is one of the leading Bag Filter Housing exporters. Bag filter system is designed for optimum filtration performance. Its range provides filtration solution for a broad variety of fluid applications in the process industry. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, & choice of end connections. The internal support ensures bags will not burst as high differential pressures build up during operation. Operation : Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.

Bag filter system is designed for optimum filtration performance. Its range provides filtration solution for a broad variety of fluid applications in the process industry.

• Brand: IMI Norgren
• Model Name/Number: F07-200-A1TG
• Port size: G1/4
• Filter element: 5.00mu m
• Feature: Direct ported filters with high water removal efficiency, Automatic drains supplied as standard, Hig

Pressure Line Filter, Air Intake Filters, Pocket Filter

We are offering pressure sand filter. Shubham filters are available in diameters from 0.225 mts. To 4.0 mts.(vertically) and in length from 3.0 mts. Mm to 11 mts. (horizontally) with flow ratesup to 350m3hr. These rugged, pre-engineered, pre-assembled units minimizeinstallation and start-up costs. Whether you require rofeed process water or filtered water, shubham can fulfill applications requirement

High Pressure Filter, automobile filter, low pressure filter

membrane filter plate, outlet valves, automatic valves

Process : Bag-houses are very efficient particulate collectors because of the dust cake formed on the surface of the bags. The fabric provides a surface on which dust collects through the following four mechanisms: Inertial collection Interception Brownian movement Electrostatic forces Pressure drop, filter drag, air-to-cloth ratio, and collection efficiency are essential factors in the design of a bag-house. These are the good Air cleansing solutions, offering our clients more economical way to make work place Environment Neat and Clean. Advantages : Have high collection efficiency for respirable dust. Can use strong woven bags which can withstand intensified cleaning cycle to reduce residual dust build up. Simple to operate. Have small size and fewer bags. There is static fiber in filter material, so it has a good effect to filtrating micro dust and it has a good ability of capturing dust, high dust capacity, and good air permeability. Contaminants Removed : Dust

Pressure Sand Filter, Sequencing Batch Reactors, Water Treatment Tanks

Pressure Sand Filters, Water Deionizer Plant, Mixed Bed Unit, Water Purifiers

Bag Filter Housing

Biogas Fired Boilers, FBC Boilers, Agro Waste Fired Steam Boiler

metallic filter housings, nonmetalic filter housings

filtration solution, Filter, Cartridge