Pressure Filter Dealers in Kathwada, Ahmedabad

Nomex Filter Bags are durable to 200oC temperature. Fresh air system works at higher temprature than 200oC System works automatically and controlled from control cabin. Under 20Mg/M3 emission is suitable with respect to world standard. Compact, less Volume with bigger filteration area. Reusing of coarse material which are taken from re-seperator and reusing fine materials which are taken from filter Low operation cost & long life.

Bagfilter is one of the most efficient and cost effective dust collector models. In baghouse filter, the dust filled air stream passes through fabric bags that filter the dust particles. Bags are made of different material such as woven or felted cotton, synthetic, or glass-fiber. The bags are cleaned manually by giving a manual shaker mechanism. The dust from the bags is collected in the bin below the hopper. rotary airlock or double gate dampers are given so that the air is not leaked from bottom. Selecting Bag Filter Bag Media Important considerations while selecting fabric filter material for bag filter: Temperature of incoming dusty air stream Moisture levels in the collector and hydroscopic nature of dustsElectrostatic nature of dust particlesAbrasion levels caused by dust particlesAcid chemical resistance and Alkali chemical resistance of fabricFabric�s capability to release dust cake easily Fabric�s permeability to allow air to passSize of dust particlesFabric cost

• Type: Stainless Steel Bag Filter Housings
• Material: Stainless Steel
• Application: Filteration Use
• Weight: Depend On Size & Specification
• Color: Metallic
• Condition: New
• Finishing: Polished
• Pressure: High Pressure, Medium Pressure
• Mounting Type: Leg Supported
• Brand Name: Aquanza
• Material: SS 304, SS 316, SS 316L, Duplex SS 2205, Duplex SS 2507, CS, MS, CSRL, MSRL
• Bag MOC: PP, Naylon
• Bag Configuration: 7"X17" Or 7"X32"
• Surface Finish: Matt finish, Mirror finish, Electro Polish (Optional)
• O-ring: Silicon, FKM, EPDM, PTFE, Other on request
• Maximum Operating Pressure: 0.7 MPa (7.0 bar, 101.5 PSI)
• Maximum Operating Temperature: 65°C (149°F)
• Supported Elements: Perforated Cage, MOC: SS304/ SS316
• Inlet/outlet Connection: BSP, NPT, DIN Flange, ASA 150# Flange, BS-10 Table `D’ / `E’ / `F’ Flange , Tri-clover (1⁄2”, 3⁄4”, 1” , 11⁄2” , 2” , 21⁄2”, 3” up to 12"), SMS
• Vent Connection: NPT (1⁄2”,3⁄4”,1”), BSP(1⁄2”,3⁄4”,1”) , Tri-clover (1⁄2”, 1”)
• Drain Connection: NPT (1⁄2”,3⁄4”,1”), BSP(1⁄2”,3⁄4”,1”) , Tri-clover (1⁄2”, 1”)

• Brand Name: EMPIRE
• Material: Cast Iron
• Usage/Application: Air Compressor
• Filtration Medium Material: Fiberglass
• Filtration Grade: Medium Filter
• Automation Grade: Manual

Pulse jet bag filter - to remove heavy dust particles from the hot flue gases to control the air pollution.

Everybody wants to have clean and pollution free air around, and since industries are more responsible for Air pollution. We combat this section. There are several varieties of Bag Filter   A Dust Collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector systemconsists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners which use disposable filters to remove dust.   In reverse-pulse-jet Bag Houses, individual bags are supported by a metal cage (filter cage), which is fastened onto a cell plate at the top of the Bag Houses. Dirty gas enters from the bottom of the Bag Houses and flows from outside to inside the bags. The metal cage prevents collapse of the bag.   Bags are cleaned by a short burst of compressed air injected through a common manifold over a row of bags. The compressed air is accelerated by a venturi nozzle mounted at the Reverse-Jet Bag Houses top of the bag. Since the duration of the compressed-air burst is short (0.1s), it acts as a rapidly moving air bubble, traveling through the entire length of the bag and causing the bag surfaces to flex. This flexing of the bags breaks the dust cake, and the dislodged dust falls into a storage hopper below.   Reverse-pulse-jet Dust Collectors can be operated continuously and cleaned without interruption of flow because the burst of compressed air is very small compared with the total volume of dusty air through the collector. Because of this continuous-cleaning feature, reverse-jet dust collectors are usually not compartmentalized.   The short cleaning cycle of reverse-jet collectors reduces recirculation and redeposit of dust. These collectors provide more complete cleaning and reconditioning of bags than shaker or reverse-air cleaning methods. Also, the continuous-cleaning feature allows them to operate at higher air-to-cloth ratios, so the space requirements are lower.   This cleaning system works with the help of digital sequential timer attached to the fabric filter. This timer indicates the solenoid valve to inject the air to the blow pipe.

Strong dedication and urge of achieving perfection made Raj Group as one of the leading names of the industry engaged in the manufacturing of high quality Hydrocyclone filter. The Hydrocyclone filter is a hydraulic classification device and the Body is made out of reinforced engineering plastic which enhances the durability of the product. The product is designed using Hydro Dynamically design with the mission to Create Maximum Centrifugal Action. Raj Group is making use of best quality raw materials for the manufacturing of flawless Hydrocyclone which can match up the standard of the industry. Installation of the device can be done in a hassle free manner and maintenance cost is also pretty low. The product is made available at an affordable price & in different sizes as per specification to match up the need and requirement of different clients. Each unit produced need to pass under strict quality check process.   Features Body made of reinforced engineering plastic for durability. Hydro Dynamically Designed To Create Maximum Centrifugal Action. Dirt Can Be Easily Flushed out Through Drain port. Collector Chamber Can Be Easily Cleaned By Opening Collector Cover. Easily Open/Close From Collector Chamber. Easy to Installation and Low Maintenance. Stand for Height Increase. Cone is made of specially designed high wear resistance material, In the Bottom it Avoid wear Due to Strong sand Vortex.    

with a candle filter, you can depend on cost-effective performance from the most efficient manufacturer. the fine chemistry candle filter meets asme or other industry standards and incorporates important functional enhancements designed by steri engineers, each with a quarter century of hands-on candle filter experience. this technology has an extensive record of reliable performance across a broad range of applications. steri candle filters are typically used as: pharmaceutical filters fine chemistry filters food industry filters requiring fda approval fuel and oil additive filters hazardous materials filters precious metal and other catalyst recovery filters solid content: up to 2%

HDPE Transport Tank Manufacturers,Jacketed Vessel Manufacturer,Chemical Equipment Manufacturers,Manufacturer of chemical Equipments,Limpet coil vessel Manufacturers,Chemical Equipment Manufacturers

• Features: The Filtration area and cake holding capacity can be increased or decreased according to requirement.

“Harsiddh” produced Sparkler Filter Press, some of operating details of sparkler filter press here. The unfiltered liquid is nursed into the filter below optimistic pressure, wherever liquid travels in downwards way and finds its way through opening on sides of the Filter Plates. As the liquid pressure growths, the Filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet. Filtration is continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance.

Filter press machine is a machine used in different industries for separate the liquid and solids. The filter press finds application in the pharmaceutical industry, food industry, mining and waste management. The sparkler filter press is the cost-effective way to differentiate the liquid from the solid. The zero hold up filter press machine is also known as pharmaceutical filter press due to its wide application in the pharmaceutical industry. Process of operation: A filter press machine is used to separate a combination of liquids and solid material. The slurry combination is fed into the filter press machine. A positive pressure is maintained inside the machine. The liquid travels in the downward direction through the moving plate. The liquid filtered through the openings on the sides of filter plates. With the increasing liquid pressure the foreign particles or solids are held by the filter media and the clear liquid is passed through a central channel which is made by the interlocking of the pressure cups towards the opening outlet. The solid material form filter cakes between the plates are processed by the wash liquors, air, vacuum and heating to obtain the final filtered product. The process of filtration continues until the cake holding capability of the unit is attained and until the rate of filtration becomes too slow due to cake resistance. Salient Features: Enclosed structure of the machine prevents the oxidation, evaporation and leakage of the materials from the machine The sparkler plates are available in two sizes    The horizontal filter plate prevents the dropping and cracking of cake The cake holding capacity and area of filtration is upgradable The machine is highly efficient and cost-effective Economical and efficient dewatering Trouble free operation and low cost of operation

• Type: Pleated Filter Bags
• Material: Non Woven
• Shape: Round
• Application: Dust Collection
• Feature: Eco Friendly, Good Finish, Moisture Proof, Soft, Waterproof
• Brand Name: kel india filter

These are made 100% spun bonded polyester filter fabrics with GI/ SS / PP Filter Cage as core material. They are used in a variety of applications like food, pharmaceuticals, chemicals, cements, sugar, fertilizers etc. And process industries. These are designed for providing high efficiency and purity filtration.  

• Condition: New
• Material: Mild Steel
• Sizes: As per Order
• Price: As per Order
• Industries: Chemical Industries
• Packaging: As per client requirement

• Brand Name: Delite Brand
• Material: Cast iron
• Color: Black
• Condition: New
• Application: Screw Machine
• Certification: ISO 9001: 2015
• Type: Screw Machine Parts
• Country of Origin: India
• Surface Finishing: Polished
• Size: Customize
• Feature: High Quality, Robust Design,Longer Life,Easy Fitted .

• Driven Type: Electric
• Power: 3-6kw
• Warranty: 1 Year
• Material: Metal
• Surface: Polished

The quality-driven filter press is a solid liquid separation device using the principle of pressure feeding. It has been used successfully in almost every industrial filtration application for many years. It includes a series of filter plates and frames or recessed plates which are arranged alternately. The filter medium is provided in between the plates.   Salient Features Compact and versatile design Sturdy and vibration free design Easy to operate Less maintenance Durable   Application Filtration   Industry Pharmaceuticals FMCG Dairy Beverages

• Temperature: up to 300° C

Our filter press pump is used to filtrate suspensions under high pressurized conditions in order to separate the liquids and solids. Filter press pump is also called diaphragm pumps. It is the heart of entire filter press system.Filter press pump is a centrifugal type with semi-open, nonclogging impeller pump with single row deep grooved heavy duty ball bearing with oil lubrication. It is the most suitable filter press pump for working under very high back pressure. Our filter press pump sludge from the bottom of the sludge holding tank into the filter press. It is mostly used in handling the slurry which is about the consistency of a material.