Back Back
Pressure Transmitter
1,000 - 100,000 Per Piece
10 Piece (MOQ)
Pressure transmitters are workhorse devices in industrial process control. They convert pressure readings into a standard electrical signal, typically a 4-20mA current loop, that can be easily transmitted over long distances without signal degradation. This allows for remote monitoring and control of pressure in various applications. Expand more Here's a breakdown of typical pressure transmitter specifications: General Specifications · Pressure Range: The range of pressure the transmitter can measure.. Ranges can vary widely, from fractions of a psi to thousands of psi (or bar).exclamation · Accuracy: Expressed as a percentage of full scale (%FS).. Typical accuracy for good quality transmitters is ±0.1%FS.. · Output Signal: The most common output signal is a 4-20mA current loop.. Other options include 0-5V or 0-10V voltage output. · Supply Voltage: The voltage required to power the transmitter. This is typically 24VDC. Performance Specifications · Temperature Limits: The operating temperature range of the transmitter.. This will depend on the materials used in its construction. · Proof Pressure: The maximum pressure the transmitter can withstand without permanent damage.. This is typically 1.5 to 2 times the upper limit of the pressure range. · Burst Pressure: The pressure that will cause the transmitter to fail catastrophically. This is typically 4 times the upper limit of the pressure range.exclamation · Response Time: The time it takes for the transmitter output to respond to a change in pressure.. This is typically in milliseconds (ms). Environmental Specifications · Ingress Protection (IP rating): A rating that specifies the level of protection against dust and water ingress.. For example, an IP67 rated transmitter is dust tight and can withstand immersion in water up to 1 meter deep. · Material of Construction: The materials used in the wetted parts of the transmitter (the parts that come into contact with the process fluid). Common materials include stainless steel, Hastelloy C, and Monel. Additional Features · Communication Protocol: Some transmitters include a communication protocol, such as HART, that allows for remote configuration and diagnostics. · Display: Some transmitters have a built-in display that shows the pressure reading. · Calibration: Transmitters need to be calibrated periodically to ensure accuracy.. Some transmitters have features that make calibration easier, such as zero and span adjustments. Here are some additional factors to consider when selecting a pressure transmitter: · Process Connection: The type of fitting used to connect the transmitter to the process. Common process connections include NPT, flange, and sanitary tri-clamp. · Electrical Connections: The type of electrical connector used to connect the transmitter to the power supply and output signal. By considering these specifications and factors, you can select a pressure transmitter that is suitable for your specific application.
Wika Pressure Transmitter
Get Price Quote
50 Piece (MOQ)
Model No: PRESSURE TRANSMITTER IS30-31 PRESSURE TRANSMITTER S201) PRESSURE TRANSMITTER IS30-31 PRESSURE TRANSMITTER S20 Suitable for applications in potentially explosive atmospheres. These pressure transmitters are designed for highest industrial requirements and have have ATEX approvals. Specifications: Measuring ranges -1…1000 bar Output: 4..20 mA ATEX-approved Devices for Ex areasSuitable for applications in potentially explosive atmospheres. These pressure transmitters are designed for highest industrial requirements and have have ATEX approvals. Measuring ranges -1…1000 bar Output: 4..20 mA ATEX-approved Devices for Ex areasSuitable for applications in potentially explosive atmospheres. These pressure transmitters are designed for highest industrial requirements and have have ATEX approvals. Measuring ranges -1…1000 bar Output: 4..20 mA ATEX-approved Devices for Ex areas
Best Deals from Pressure Transmitter
Industrial Pressure Transmitters
4,900 - 5,500 Per 0.4bar
It's working very smoothly 1000+ happy customer
0.0
View Profile
Differential Pressure Transmitter
32,000 Per Piece
0.0
View Profile
Pressure Transmitter
Get Price Quote
We propose high quality pressure gauge,A pressure sensor with transmitter which measures pressure, typically of gases or liquids.
0.0
View Profile
GM8802C-E Compact transmitter
Get Price Quote
Key Feature CE approved DIN-rail mounting Powerful 32 bit ARM technology CPU makes it exceptional precise and responsive 6 Digit LED display and 4 push buttons for easy calibration and troubleshooting Patent pending two-layer advanced digital filtering algorithm 24 bit Delta-Sigma A/D conversion with 8 million counts internal resolution Aluminum casing for maximum protection and shielding electrical interference Linearity better than 0.001% Power supply 18-36V DC Smart adjustable analogue output Calibration with weight on device, or through external interface (including PLC/PC) Watchdog function making it fail-safe and always reliable
Wika Pressure Transmitter
4,550 - 12,500 Per Piece
1 Piece (MOQ)
Pressure Transmitter
Get Price Quote
Specifications : Pressure Range : 0-0.1 MPa ~ 6MPa Over load : 150% FS Burst pressure : 300% FS Output : 4-20mA, 1-5V/0-5V, 0-10V ; 2 mV/V , 3.33mV/V Power supply : 12-36VDC; 10VDC Response time
0.0
View Profile
Air Compressor Pressure Transmitter
Get Price Quote
Temperature Pressure Transmitter
Get Price Quote
We bring forth a wide range of Temperature Pressure Transmitters for our customers in the market. We have been recognized as one of the leading manufacturers and suppliers of these temperature pressure transmitters. These temperature pressure transmitters are used in various industrial processes to maintain the pressure and temperature. These temperature pressure transmitters are available in a range of designs as per specific purposes for different industrial processes. We are providing these temperature pressure transmitters to our customers at affordable prices.
0.0
View Profile
Differential Pressure Transmitter
850 Per piece
Keeping in mind the diverse requirements of the clients, we offer dimensionally accurate range of Standard NABL Traceable Calibration Service of Differential Pressure Transmitter that are appreciated. This service is rendered by our Team of Highly Skilled expertises using sophisticated tools and techniques in compliance with national and international quality standards.
0.0
View Profile
DIFFERENTIAL LIQUID PRESSURE TRANSMITTERS
Get Price Quote
High strength corrosive resistant stainless steel sensor construction. No silicone oil, no welds, no internal "O"rings. Compatible with a wide range of liquids and gases. Suitable for high shock and vibration applications. FEATURES Excellent long-term stability and high accuracy Backlit LCD for display of differential or gauge pressure Jumper selectable LCD backlight for low power consumption applications Four switch selectable pressure ranges Jumper selectable output types, 4-20 mA, 0-5 and 0-10 Vdc NEMA 4X (IP65) enclosure Pushbutton and remote zeroing terminal Uni-directional or bi-directional pressure range selection switch High / low port swap switch to solve incorrect plumbing for differential Normal or slow surge damping switch to prevent false alarms and reduce noise Output polarity reverse switch
0.0
View Profile
Pressure Transmitter
Get Price Quote
0.0
View Profile
digital pressure transmitter
15,000 Per Piece
0.0
View Profile
Diaphragm Seal Transmitter
1,550 Per Piece
0.0
View Profile
SMART DIFFERENTIAL PRESSURE TRANSMITTERS
Get Price Quote
0.0
View Profile
Differential Pressure Transmitters
5,500 Per Piece
1 Piece (MOQ)
0.0
View Profile
Differential Pressure Transmitter Sensocon
Get Price Quote
Field Selectable Pressure Range Field Selectable 4-20 mA or 0-10 V Output Optional Automatic Zero Optional LCD The Series DPT Multi-Range Differential Pressure Transmitter was designed specifically for the building automation and HVAC industry. With field selectable ranges down to 0.1 inches w.c., this product is ideal for montioring building pressure, static pressure, differential pressure, or air velocity and flow. The Series DPT Differential Pressure Transmitter also has jumper selectable outputs for 4 – 20 mA or 0 – 10 V and unit selection giving additional flexibility. For a virtually maintenance free transmitter, order the optional automatic zero and the transmitter will perform its own zero point maintenance. The Multi-Range Differential Pressure Transmitter also has an optional backlit LCD for giving local indication. Techinical Specification: Maximum Pressure: 100 in w.c. Media Compatibility: Dry air or non-aggressive gases Accuracy: Ranges < 0.5 in w.c. = +/- 0.01 in w.c. Ranges ≥ 0.5 in w.c. = +/- 1.5%includes thermal effects, linearity, hysteresis, repeatability, and long term stability. Temperature Ranges: Compensated: 14° to 122°F Operating: 14° to 122°F Response Time: 0.8 – 4.0, jumper selectable Power Supply: 24 VDC or VAC, +/- 10% Output: Voltage: 3-wire 0 – 10V or 0 – 5V, jumper selectable Power Consumption:
0.0
View Profile
digital pressure transmitter
8,000 Per unit
0.0
View Profile
Pressure Transmitter
18,000 Per Piece
1 Piece (MOQ)
0.0
View Profile
Filter by Localities
Post Free Ad