Priming Pumps Dealers in Ctm, Ahmedabad

  SELF PRIMING MUDDY WATER PUMP MODEL HP RPM PUMP SIZE TOTAL HEAD IN MTRS / DISCHARGE IN LPM 6 8 12 15 18 19 20 22 24 26 28 30 34 SP-0 1.00 2850 40X40 312 270 204 66                   SP-1 2.00 2850 40X40     336 264 162 108 48             SP-2 3.00 2850 50X50     480 276 378 354 312 234 150         SP-3A 5.00 2850 80X80 1182 1152 1068 972 858 822 762 660 552 426       SP-3 7.50 2850 80X80             912 894 858 798 708 594 300 SP-3L 5.00 1450 80X80             588 540 486 420 360 306   SP-4LA 10.0 1450 100X100     2040   1560   1320             SP-4L 12.5 1450 100X100     2400   1740   1680   1560 960  

thursday, 25 december 2014 10:47 special features:- excellent quick automatic action without foot valve up to 8 mtrs. automatic air release during priming. back pull out design, so easy maintainance without disturbing pipe lines.                                                  dynamically balanced rotating parts ensure less vibrations.                        better efficiency because of good hydraulic design.                                                                                    minimum parts, fast repairing at low cost, also pump is available at economical rate. available in bare, coupled, monobloc, belt driven & engine driven version. also offered pump with trolley / trailer to move it from one place to another. monobloc pumps can be able to with stand with wide voltage fluctuations. less expensive & easily available spares. pumps can be fitted with mechanical seal as per customer's requirements. very simple construction, only two moving parts. easy inspection of impeller. large diameter solids handled. Up to 60 mm high resistance. To abrasive liquids the wear plate is easily replaced and impeller are also available with ceramic coating easy to install: - only the suction hose is immersed in the liquid, the pump can be set  up high and dry in the most convenient position for inspection and maintenance. long life :- the parts subject to wear can be easily replaced one or more times to restore the original performance.       typical application:- liquid containing sand mud or solids in suspension with ph from 5-13, smoke scrubbing; water emulsion for machine tools or grinders, cutting or quenching fluid circulation, cooling water circulation in steel mills or drawing mills; neutralizing liquid dosage, pumping out settled sludge, sump pumping liquid manure transfer and circulation water circulation in paint spray booths; stripping fuel tanks circulation recovery of dirty solvents                                           transfer of light petroleum product such as diesel fuel, paraffin, kerosene and petrol (gasoline) liquid fertilizer transfer, circulation and spraying, brackish or sea water containing sand brackish or sea water washing, cooling or fire fighting in ports; auxiliary duties on board marine duty; brine, sea intake and circulation of sea water in swimming pools pumping out acid waster, transfer, of dilute acids; fruit juice or fluid food products recovery of spills from chemical plant; transfer or circulation of caustic soda or potash                                                                                  

• Brand Name: Chemshire
• Driven Type: Electric
• Condition: New
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Certification: CE Certified
• Type: Self Priming Pumps
• Country of Origin: India
• Capacity: 60 M3/hour
• Head: Up To 35mtr
• Discharge Size: 20 mm to 150 mm
• Pump MOC: CI, SS304, SS,316
• Sealing: Mechanical Seal Fitted

We offer to our esteemed clients efficient Regenerative Self Priming Pump. Our Regenerative Pump is appreciated by customers for its compact design and dependable performance. Our pumps are available in various dimensions to suit different industrial requirements. That is why we are a celebrated Manufacturer, Supplier and Exporter of Regenerative Self Priming Pump from Ahmedabad, Gujarat.Details :  Capacity -Max. 130 L.P.M.  Head -Max. 80M.  Speed -1450 R.P.M (Normal) 1800 R.P.M. (Max.)  Temperature -Max. 60oC for Standard Pump Max. 100oC for Hot Water Pump 'H'  Suction Lift -Max. 8 M.  Rotation -Clockwise when looking from drive end.  Application :  Solvent Transfer  Transfer of Liquid with Air/Gas  Various Marine Applications  Refrigeration / Fuel oil  Industrial Water Supply  Material of Construction :  Suction Cover -CI FG260  Delivery Cover -CI FG 260  Intermediate Parts -CI FG 260  Impeller -H.T. Brass  Shaft -Stainless Steel  Shaft Sealing -Gland Packing / Mech. seal  Special Material also available  Constructional Features :Have Horizontal, Lateral Channel, and self-priming design for continuous operation handling clear liquid free from any suspended particle. Suction and Delivery branches are vertical and flanges are oval. Counter flanges are provided with BSP thread. Pumps are provided with one grease lubricated ball bearing and one bush bearing flushed by liquid handled. For special applications, mechanical seal can be fitted.  Tolerance on Capacity + 10% at rated head and rated R.P.M.  Capacity applies to liquid at barometric height of 760 mm mercury and at a temperature of 30oC  Power inputs indicated above are for specific gravity of 1.0 and viscosity of 1 cSt.  For hot water pump 'H', capacity is reduced.  For Suction lit of more than 4 M. Capacity is reduced.

mud- self priming centrifugal pump is adequate and automatic in nature. Mud- self priming centrifugal pump is easy to maintain and can be easily repaired at a very low rate. Our mud- self priming centrifugal pump is available at reasonable prices. Mud- self priming centrifugal pump can be installed without any hassle, besides; their spare parts are easily available and replaceable. Our mud- self priming centrifugal pump can also work efficiently during voltage fluctuations. advantages easy to installless maintenanceeasily repairable uses pumping out polluted waterhandling water and light chemicalsprocessing dairy products specifications

HES(X)-JE(X) Self Priming Motor Driven ‘Jet’ Pumps in AISI 304 Self priming motor driven AISI 304 stainless steel pumps particularly suitable for supplying drinking water, domestic water boosting, small-scale garden watering, draining tanks and swimming pool and handling clean water in general. Technical Specifications ·         Maximum working pressure : 6 bar ·         Maximum liquid temperature  :  45oC ·         Maximum suction depth : 8m ·         Capacity up to 4.5 m3/hr   ·         Total Head up to 49 m  

Varuna Self Primimng Pumps are manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration. These pumps are available from 0.25 HP to 1.50 HP   Self Priming Pumps Salient Features   The motor body is made from extruded aluminum and cast iron for better heat dissipation. Capacitor starts and runs motor with IP 44 protection. Pre-lubricated double-shielded ball bearings for a longer life. High quality carbon-ceramic mechanical seal for a longer life. The rotating parts of motor and pump are dynamically balanced to ensure minimum noise and vibration. Protective Enclosure – Totally Enclosed Fan Cooled motor (TEFC) type means no dust or moisture. Pump can operate in wide voltage range.   Application   High rise buildings Car washing Hospitals Hotels Domestic water

• Type: Self Priming Pumps, Domestic
• Application: Water
• Certification: ISO 9001:2008
• Weight: 10-20kg
• Color: blue
• Condition: New
• Power: 0.75hp
• Warranty: 1year
• Brand Name: goodwill
• Application: use for water lifting
• HP: 0.75
• Phase: 1 Ph
• Size: 25x25
• RPM: 2880

We manufacture high quality Self Priming Bare Mud Pumps that are applied for the used for an extensive range of usage that deals with the supply of water. Our pumps offer excellent performance to the clients in a durable manner. Since they are procured from the best quality raw-materials from the trusted vendors of the market and are fabricated as per the designs of our experts. They are robust and are does not corrode or erode easily. They are made as per the norms of the industry utilizing the state-of-the-art technology. Hence they function reliably and offer swift automatic self priming action. They vibrate minimally and are noise free. They offer high energy efficiency hence is very cost-effective. They need minimal maintenance and can be installed easily. We test out the quality of our pumps to make sure we deliver faultless pumps to our clients. We offer them at market leading price rates. Specifications: HP 1.00 TO 25.00   Salient Features : Swift automatic self priming action Durable High and smooth performance Strong and sturdy Ideal for tough industrial environment Quality tested Reliable Minimal vibrations Non-noisy Easy installation and maintenance

Application It can be used for Hot Water Transfers, Thermic Fluid Boilers, Hot Oil Transfers, Chemical Industries, Petro Chemical Industries, Jet Dyeing, Refineries, Sugar Mills, Paper & Pulp Industries, Laminate Industries, Seawater desalination plants, etc. Design Back pull-out construction, Horizontal, Foot mounted, Center mounted, Single stage, End suction Top centerline discharge. Operating Data Pump Size – DN 32 to 100 Capacity – up to 100 m3/hr Head – up to 150 m Temperature – up to + 350° C RPM – up to 2900 rpm Material Casing – C.I. Gr., CS, SS 304, SS 316 Impeller – C.I. Gr., CS, SS 304, SS 316 Shaft – EN9, SS 304, SS 316 Shaft Protection Sleeve – MS with Hardcrome, SS 304, SS 316 Gland Stuffing Box – C.I. Gr., CS, SS 304, SS 316 Bearing housing – C.I. Gr.

Graded casting & EN - 8 / SS 316 / SS - 410 Shaft increase service life. Minimum need for inspection and maintenance because greased for life, external lubrication. Drive options of electric motor, coupled or belt drive versions or by Petrol / Diesel engine. Perfect sealing assured by high quality mechanical seal which can not run dry because of in-pump oil reservoir.       MATERIAL OF CONSTRUCTION       Impeller : Cast Iron / SS - 316, SS - 304 / Bronze or as per request Pump Casing : Cast Iron / SS - 316, SS - 304 Bronze or as per request Shaft : EN - 8 / SS - 316, SS - 304 or as per request Mechanical Seal : Carbon Vs. Ceramic / Tc Vs Tc with NBR / Viton / PTFE       APPLICATION       Effluent treatment, Sewage Plants, Dyes and Intermediate Industries. Dewatering Docks, Ports, Vessels, Swamps, Basements, Trenches, Construction sites, Swimming Pools etc. Pumping petroleum products like L.D.O., Diesel, Petrol, Kerosene etc. Transfer of Chemicals, Solvents, Effluents, Hot Water, Chilled Water, Condensate etc.       DESIGN       Perfect selfpriming action with maximum suction head of 8 meters. Back Pullout design, simplifies inspection and maintenance. Impellers with wider flow passage avoid clogging and can handle solids up to 24 mm diameter. Compact, light weight and yet rugged construction.       RANGE       Capacity : Up 270 m3 /Hr. Suction Head : Up to 8 Mt. Head : Up to 57 Mt. Solids : Up to 24 mm DiaB

• Type: Self Priming Pumps
• Application: Oil, Water
• Weight: 10-20kg, 20-300kg, 30-40kg, 40-50kg
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Automatic Grade: Manual
• Power: 10hp, 1hp, 2hp, 3hp, 5hp, 7hp
• Driven Type: Electric
• Warranty: 1year, 2years

Varuna Self Primimng Pumps are manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration.

• Type: Self Priming Mud Pump (with Mech. Seal fitted)
• Capacity: up to 75 m/hr
• Head: up to 35 mtr
• Pressure: up to 5 kg/cm2
• Speed: up to 2900 rpm
• Temperature: up to 100° C
• Suction Head: up to 7.5 mtr
• Size: 32 mm to 75 mm
• Solid Hand Size: up to 25 mm
• Viscisiy: up to 100mm/Sec.
• M.O.C.: CI, CS, SS304 / 316, SS 304 L/316L, Alloy 20, Hast alloy B or C,CD4MCU, etc

Self Priming Non Clog Pump, Volute Centrifugal Pump, Rotary Gear Pump

The self-priming pump is a pump which uses air-water mixture so as to reach a fully-primed pumping condition. It overcomes the problem of air binding through the process of mixing air with water in order to create a fluid with the pumping properties which are much like that of regular water. It then gets rid of the air and moves only water like any other normal pump. We at Active Seals are the Self Priming Pump Suppliers. We make the product available to everyone who needs it at a price which is reasonable enough. The product is of high quality and works efficiently.   Not only are we the suppliers for this product but we are also the Self Priming Pump Manufacturers. We manufacture various types of this product for the sludge type media application to be done. The product is also manufactured and made available in all types of alloy grades. We manufacture the SG type Self Priming non clog pumps and make it available in a wide range for the customers to choose from. The pumps manufactured by us are very durable, save energy and is installed with excellent thermal features. We believe in advancement and thus we make use of the advanced manufacturing facilities to manufacture our products. The pumps made at our company have turned out to be very efficient for the rain water disposal and the also the sewage treatment plant. The pumps are well-made to handle the mud and the slushy water. The Self Priming Pump of our company is available with enhanced features. All types of negative and positive suction working is possible with these pumps and are available in various M.O.C. like C.I. Bronze, Gun Metal, Stainless Steel and various other alloys too. The maximum solid hand size is up to 25 mm with head up to 35 Mtr. The capacity of the pump is 75m3/hour with the suction head of up to 7.5 Mtr. The sealing types used are Mechanical Seal and Gland. The pump can be used for dewatering swamps, Trenches and basements, Swimming pools, Marine application, Effluent Treatment Plants, Transfer of lubricants like Petrol, Diesel, Spirits, Gas Oils, Kerosene and many more. We not only operate at the local level but also at the national and inter-national level. Active Seals is in fact a leading Self Priming Pump supplier with its customers in various countries. We provide with highly efficient and good quality products which are the best that you can get at the available price range.

• Motor Horsepower: 1 HP
• Pump Type: Self Priming
• Brand: BHOOMI
• Material: Casting
• Power Source: Electric
• Motor Phase: Single Phase

Our clients can avail a quality range of Self Priming Centrifugal Pump Set from us. All these self priming centrifugal pump set are developed at our sophisticated manufacturing unit, in compliance with the established norms and standards of the industry. These self priming centrifugal pump set are offered at market leading price. APPLICATION: Effuent Treatment, Sewage Plants, Dyes and Intermediates. Dewatering Docks, Ports, Vessels, Swamps, Basements, Trenches, Construction Sites, Swimming Pools etc. Pumping Petroeum Products Like L.D.O., Diesel, Petrol.Kerosene etc. Transfer Of Chemicals, Solvents, Effluents, Hot Water, Chilled Water, Condensate Sites etc. Features: Graded Casting & EN-8 / SS 316 Shaft Increase Service Life Minimum Need For Inspection And Maintenance Because Greased for Life, external lubrication. Drive Options Of electric Motor, Coupled Or Belt Drive Versions Or By Petrol / Diesel Engine. Perfect Sealing Assured By High Quality mechanical Seal Which Can Not Run Dry Because of in-pump Oil Reservoir Design: Perfect Selfpriming Action With Maximum Section Head Of 8 Meters. Back Pullout Design, Simpllifies Inspection and Maintenance. Impellers With Wider Flow Passage Avoid Clogging And Can Handle Solids Up To 24 mm Diameter. Compact, Light Weight And Yet Rugged Construction. Material Of Construction: IMPELLER  :    Cast iron / SS - 316, SS - 304 / Bronze or as per request PUMP CASING  :    Cast iron / SS - 316, SS - 304 / Bronze or as per request SHAFT  :    EN - 8 / SS - 316, SS- 304 or as per Request MECHANICAL SEAL  :    Carbon Vs Ceramic / Tc Vs With NBR / Viton / PTFE Range: Capacity  :    Up 75 m3 / Hr.     Suction Head : Up to 7.5 Mt Head  :    Up 35 Mt.     Solids : Up to 24 mm Dia

Item Code: NRVLeveraging on the competence of an efficient workforce, we are capable of providing our clients with a superlative range of Self-Priming Pumps (NRV - 0.5HP). The unique quality of our pumps is that these use air-water mixture to reach a fully-primed pumping condition. These pumps are highly demanded in the market owing to features like causing no clogging and optimal efficiency.Application areas: HotelsClubsFlats BungalowsHospitalsDairies Gardens

Self Priming Monoblock Pumps, Pump Sets, V6 Submersible Pump

Self Priming Centrifugal Pump, Monoblock Mud Pump, bare shaft pump

Self Priming Mud Pump

Self Priming Monoblock Pump, Open well Submersible Pump, Domestic Water Pumps

Self Priming Pump, tyre coupling type kt, Flexible Couplings, bellow seal

self priming, submersibles pumps, Monoset Pumps, mono block pumps, Pumps

mini monoblock self priming pump, Borewell Submersible Pumpsets

Monoset Pumps, Monoblock Pumps, Motor, Pump, Pump Casing, Impeller

Self Priming Mud Pump, Asynchronous Electric Motor, brush motors