Priming Pumps Dealers in Kalupur, Ahmedabad

• Power Source: Electric
• Usage: DOMESTIC
• Condition: New

SELF-PRIMING PRINCIPLEAir is drawn into the pump by the vacuum produced as the Impeller rotates and is emulsioned with the liquid contained in the pump casing. The air/liquid mixture is driven into the priming chamber where the air, which is less dense, separates out and vents through the delivery line while the liquid, due to the higher density, falls back and is recirculated. When all the air has been evacuated from the suction line, the pump primes and operates like a normal centrifugal pump, it can also handle a mixture of air and liquid. The check valve mounted in the pump suction serves two purposes: it prevents the liquid from draining out of the suction line when the pump is not in operation, and if the suction tine is drained by accident, enough liquid is retained in the pump casing for the pump to reprime. The delivery line must allow the air drawn from the suction line to vent to atmosphere. JMD series pumps are self priming centrifugal pumps with open / semi open impeller handling polluted liquids with large diameter suspended solids. The solid rugged design with replaceable wear plate and back pull out design makes it most reliable option . FEATURES- Simple Construction having back-pullout design.- Easy inspection of impeller.- Quick Self-priming action without foot-valve up to 7.5m.- Pumping large size diameter solid in suspension.- Available in Mono-block & Bare-shaft design forv-belt /couple set version.- Various options for material of Construction, like -AlSLSs304, AISI316, Bronze & Sealing.- Option for separate volute design and replaceable wear plate Gland Plate for quick. Low-cost & easy maintainance.- Standard model having SS410 Sleeve.Wear Plate Screw, lmp.Nut;C40 Shaft, Rest in FG200 Cast Iron. GENERAL VIEW OF PARTS OF SELF PRIMING COUPLED PUMP 1   volute chamber2   delivery flange3   gasket packing4   wear plate5   impeller6   lantern ring7   GLAND8   OIL SEAL9   BEARING BRACKET10  PUMP SHAFT11  NDE1 BEARING 12  lock nut (noe1 bearing!13  de-bearing14  water deflector15  gland plate16  gland packing17  bottom drain plug plate18  front drain plug19  volute chamber plate20  suction flange21  non return valve   APPLICATIONSJMD pumps are used when one or more of the following are required : • Self priming • Solid / Polluted handling. • Resistance to abrasion.JMD Pumps can handle liquids up to a Viscosity of about 50 mm /s (cst) WASTE TREATMENTPumping Out settled Sludge,Dosing Neutralizing Liquids, Filteration, Pumping Out Settled Sludge. Pumping Polluted, Corrosive Waste Water Containing sand, Mud Or Solids In Suspension. Effluent Treatment Plant.INDUSTRYTransfer of clean or dirty, neutral, acid or alkali Liquids, Liquids containing sand, mud or suspended solids, Clean or dirty low viscosity petroleum products or solvents, milk or lime suspicion soda, washing, cooling, circulation, smoke scrubbing, emergency duty.CIVIL ENGINEERINGDe-Watering Construction Sites, basement, trenches, Food Waste in restaurants. Swimming pool Alteration.MARINE DUTYLoding or Unloading Sanitary duty. Cleaning bilges.AGRICULTURESurface irrigation, Liquid manure Oxygenation, Distribution & Liquid animal feed. Portside Liquid or fertilizers

We bring forth in the market technology advanced Self Priming Muddy Water Pump. The experienced technocrats manufacture the Self Priming Muddy Water Pump conforming to the industrial standards. We export Self Priming Muddy Water Pump in safe packing within a stipulated time frame at cost-efficient price.

Self Priming Monoblock Pump, Electric Motors

portable fire pumps, Fire Fighting Equipment, Hose Reel

Submersible Pumpsets, Electric Motors, Induction Motor