Process Controllers Dealers in Memnagar, Ahmedabad

• Feature: Low maintenance,Excellent functionality,Perfect quality
• Voltage: 100V (-15%) to 240V (+10%) AC
• Brand Name: Fuji
• Output Type: Digital
• IP Rating: IP66
• Accuracy: +- 0.2%FS
• Current: DC 0-20 mA / DC 4-20 mA
• Display Type: LED
• Item Code: PXH-Series
• Model Name/Number: PXH
• Mounting Type: Panel Mount
• Frequency: 50/60 Hz
• Power Consumption: 15-20VA

We offer batch controller. Features: - micro controller based unit - eeprom for data & parameter storage - onboard rtc - operating supply: 230v/110vac - display: 128 x 64 graphics lcd display with backlit - keyboard: 23 keys membrane keypad - input: load cell sensor - excitation voltage: 10vdc - adc: 24-bit adc used for digitization - field programmable parameters: - set points/offset of all component, filter, various timings for batching sequence - control outputs: total 12 relay outputs - seven relays to control feeding of components - alarm, gate on/off - status: batch over, batch ready - digital inputs: 8 digital inputs to read status & remote commands - calibration: offset & span calibration through software using keypad - report: batch wise online & offline report printing - serial interface: rs-232/rs-485 (for printer/computer) - mechanical data: mounting: panel mounting - dimensions: - outer: 269 (w) x 133.5 x 190 (d) - cutout size: 228 mm x 133.5 mm - enclosure: normal

• Voltage: 100 V (-15%) to 240 V (+10%) AC
• Brand Name: Fuji
• Output Type: Digital
• IP Rating: IP66
• Accuracy: +- 0.2%FS
• Current: DC 0- 20 mA / DC 4-20 mA
• Display Type: LED
• Feature: Low maintenance, Excellent functionality, Perfect quality.
• Model Name/Number: PXH
• Mounting Type: Panel Mount
• Frequency: 50/60 Hz
• Power Consumption: 15- 20 VA

This is a microcontroller based unit. It will measure Current tension and generate control output signal to maintain desired tension. SPECIFICATION : Input : Load cell (Up to Two in parallel) Excitation : 10 VDC Control Output : Analog 0 to 5VDC Operating voltage : 24VDC +/-10% Display : 4-digit 7-segment, 0.56” red LED Keyboard : 4-keys Digital Input : Auto/Stop mode enable from Front Enclosure : Panel mount, General purpose, Metallic Dimension : Bazel: 96 x 96 x 100 mm (D) Cut-out: 92 x 92 mm FUNCTIONAL DESCRIPTION : This unit will provide excitation to Loadcell. It will support up to two load cells. Unit accepts analog input signal from load cells. Based on Loadcell input, current value of tension will be displayed. User will be able to set desired value of tension as set point. Control parameter: P, I & D will be settable. In auto mode, unit will generate control output: 0 to 5VDC using PID algorithm. This output can be used to control tension using breaking system. Visual indication of control value will be available on front plate. When ‘Stop’ key is pressed, control output will be set to Zero. User will be able to set desired value of control output

• Power: 24 Vac / Vdc, 10%
• Display: 16 x 2 Lcd Display
• Humidity: 5-95% Rh
• MMI Size: 144mm(H) x 144mm(W) x 56mm(D)
• Temperature Range: 0-50 Degree C
•  :  

• Display Type: Digital
• Weighing Capacity (Kg): 2 kg
• Brand Name: Samyak
• Model: 101
• Power Supply: 110-230VAC
• Accuracy (%): 0.1% of FS +/- 1 Digit
• Automation Grade: Automatic
• Powder Coated Body: Yes
• Display Shape: Rectangular
• Input: Load cell,Proximity (PNP type)
• Aggregate Rate: 4 Digits
• Conveyor Speed: 3 Digits m/sec
• Total aggregate: 8 Digits
• Keypad Type: Eight keys membrane keypad
• Descrete LEDs: 2
• Proximity Power Supply: +24V DC/50 mA
• Output Options: 0 to 10 V DC
• Relays: One for Alarm Condition
• Serial Interface: RS232 or RS485
• Scaling Method: Linear
• Warm Up Time: 10 Minutes
• Enclosure: Metalised DIN Standard,Panel Mounting type
• Outer Dimensions: 144 W x 144 H x 120 D
• Cutout Dimensions: 138 mm x 138 mm
• Display: 14 Digit 7-segment 0.56 Inch Red LED Display Organised in three Groups

• Brand Name: HIEON
• Brand Name: Instec India
• Usage/Application: Genset Controllers
• Voltage: 120 to 260 V AC
• IP Rating: IP68
• Frequency: 50 Hz
• Working Temperature: 0 to 100 Deg C,RH 10 - 95%,Non-condensing

The BC1000A/B series is a flame switch for intermittent operation to indicate presence or absence of a flame and to be applied in commercial or industrial burner installations. The BC1000A can also be used as a primary control for manually operated burner systems using a start/stop station. In addition to the flame sensing functions, the BC1000A/B provides a “Safe Start” function which checks if a flame signal is present when applying power to the device. If so, the BC1000A/B holds its operation until the flame signal disappears. The BC1000A/B can be used with a recifying flame rod or all existing non-selfcheck Honeywell “PowerTube” type UV sensors (for intermittent operation only. DESCRIPTION The BC1000 (FR models) will operate also with the ex-Satronic IRD810/1010 range of infrared sensors. Note that this combination is NOT CE approved for use on installations that fall underthe GAD (Gas Appliances Directive). FEATURES 1) Compact design.2) Plug-in wiring sub base for direct panel or DIN RAIL mounting.3) Safe-start check (SSC) feature prevents operation when abnormal flame condition exists at start-up.4) LED indication (Power, Flame, SSC) on the front to show operation status (SSC hidden behind the front cover).5) Screw terminals on the front provide continuous 0~6VDC flame signal strength monitoring  

Web Tension Controller, line guide systems, edge guide systems, Stroboscope

Sequence Controller, Pressure Switch, Photocell, Nozzles

Web Tension Controllers

Small Board Digital Controller, Paperless Recorder

Process Control System, Variable Frequency Drives

Automatic Pressure Calibrators, humidity generators