Process Pumps Dealers in Ellisbridge, Ahmedabad

Suitable for Contaminated liquids, as well liquids containing air or gas, for sumps, gullies and many other applications where a suction lift is required Features Excellent self-priming ability No non-return valve required in the inlet Single unbalancedbalanced seals to EN 12756 (DIN 24960) Mechanical seal with dry-running protection through oil bath quench Ideal for handling contaminated liquids Easy maintenance – Back-Pull-Out principle Flanges 32 and 40 threaded connection Flange connection 50 and higher to ISO 7005 PN 16 Flange connection to ISO 7005 PN 20 (ANSI B16.5 150 lbs) optional Greased for life roller bearings Magnetic drive optional Atex certification

• Max. capacity: 350 m3/h (1540 GPM)
• Max. pressure: 35 bar (508 psi)
• Max. temp: 350 °C (662 °F)
• Max. speed: 3600 rpm

CombiPro heavy duty process pump according to API610, API682 and API685 Max. head : 160 m (525 ft) Materials: carbon steel, 13% Cr-steel, stainless steel (316)

• Capacity :: up to 100 m3/hr
• Head :: up to 45 meters
• Temperature: Max. Temp. up to 70* C for PP MOC and 150* C for PVDF MOC

PP PVDF -series pumps are specially design for highly corrosive chemicals in which metal pumps are not recommended or in its cost is higher. The PP- series pumps design are single piece molded polypropylene volute casing with semi-open impeller and casing cover to ensure a smooth running performance against corrosion. The high allumina ceramic sleeve protects shaft to any corrosion and abrasion. The GFT or Sic Vs. Ceramic PTFE below Mechanical seal prevents the leakage from the pumps. The Cast Iron heavy duty oil lubricated bearing housing provide maximum strength to pump. The pumps are also available in Mon-block version with compact design. The PVDF series pump thick walled casing liner & back plate is made of PVDF. A large metal insert in PVDF impeller increased mechanical strength. The PP Series Polypropylene Pumps are also available in monoblock version with compact design. Application For handling highly corrosive acids, alkalis, hydrocarbons, effluent, slurries, and other chemicals like; HCL –33%, Dilute H2so4, Caustic solutions ( NaOH ), HF, H3PO4, HN03, Alum, NaoCl, Feso4, CusO4, FeCl3 etc. The pumps are also used in scrubbing of corrosive gases like Cl2, Br2, F2, I2, So2, So3, Co2 etc. as scrubber pump in various chemical industries, in Pickling process in Steel Rolling Mills, Acid circulation in electro plating industries, decaling in boilers, heat exchangers etc.

• Type: Chemical Process Pump
• Weight: 100-150kg, 200-250kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years
• Pump Power: 10Hp, 2Hp, 3Hp, 5Hp, 7Hp
• Pump RPM: 1400, 2800

• Impeller: Cast Iron
• Casing: Cast Iron
• Hardwares: Stainless Steel
• Size: DN 50 mm
• Capacity: Up to 29 m /hr
• Motor Rating: 1Ø - 1.1 kw / 3Ø - 1.5 kw

Features Applications Technical data and selection table • Vertical, monobloc submersible pumpset. • Free flow impellers of two sizes. • 1 phase and 3 phase motors with IP 68 protection,class ‘F’ insulation. • 1 phase motor with built-in thermal overload protection and float switch. • Bi-directional mechanical seal. • Easy and less maintenance due to SS hardwares. Pumping of surface water, rain water, waste water containing solids. • Drainage of sumps liable to flooding. • Drainage of basements, underground bunkers, cable trenches in industries, hotels etc. • Municipal pits. • Construction sites.  

Advanced Materials & Tribology offers Process Pumps. It is used for graphalloy refinery process. It is of L-single stage overhung type. It pumps HF acid, which is one of the most dangerous products pumped in a refinery.  

BCP Series Centrifugal Pumps Are Horizontal Back Pull Out Design, Single Suction and having dimension correspond to Din 24256 / ISO 2858 with end suction and top center discharge design The pumps are also available with semi open /open type impeller for liquid having suspended particle some solid and  abrasive in nature Either soft Packed gland or Various mechanical Seal can be used as per liquid to be handled.The design permits dismantling of the complete bearing unit towards the drive end, without the pump casing having to be disconnected from the piping. Application:- For pumping clear  turbid water, chemicals &  Volatile liquids Air conditioning plants, Power Stations Mine drainage, Sprinkler System, Fire fighting,  booster Service oils, petrochemical, fertilizer, sugar, paper and other process ind.

which is sourced from Beacon and Kirloskar. We offer back pullout centrifugal pump, that is widely used to move liquids or slurries in diverse industries. It is centrifugal pump centrifugal force developed by impeller rotation transfer fluid at press. These back pullout centrifugal pumps are made as per the specifications and requirements of clients.

Coolant Pumps, PVC Pipe Extrusion Machine, net making machine

• Power: 12 kw
• Power Source: Electric
• Motor Phase: Single Phase
• Brand Name: Keerthi
• Motor Horsepower: 0.1 - 1 HP

We are offering submersible dewatering pumps for mud, sludge, slurry, sewage, waste water, clear water & all other industrial water application.

Pvdf Centrifugal Pumps, Solenoid, safety shut off, Damper

waste water management systems, Pumps, sheet metal pumps, Submersible Pump

hvac pump

submerged vertical process pumps

Open well Submersible Pump, Submersible Pump Panel, submersible pump spares

Submersible Portable Dewatering Pump

Monoset Pumps, Submersible Volute Casing Pumpset, Polder Submersible Pumpset

pumping equipment

Process Pump, Monoblock Pump, self printing sewage pump

Process Pump, Submersible Pump, Self Priming Pump, Textile Machine

Dewatering Vacuum Pump With Mat Set, Toxicity Tester