Pumping Systems Dealers in Gidc Vatwa, Ahmedabad

• Number Of Stages: Single stage
• Country of Origin: Made in India
• Material: Cast Iron
• Type: Belt Drive Rotary Vane Pumps
• Phase: 3 Phase
• Motor Speed: 1450/2800 RPM
• Power: 0.5 HP
• Usage/Application: Industrial
• Mounting: Floor / Permanent
• Flow Rate: 10 m3

• Country of Origin: India
• Material: Metal
• Warranty: 2 Yrs
• Surface: Polished

A pumping station is a facility designed to move fluids (liquids or gases) from one location to another. It is commonly used to transfer water from a low elevation to a higher elevation, where it can be distributed to homes and businesses.

• Type: Solar Water Pumping System
• Certification: CE Certified
• Application: Water Pumping
• Automatic Grade: Fully Automatic
• Warranty: 2years
• Brand Name: AquaSun
• Application: Agricuture Irrigation
• Structure: Galvanized
• Solar power: 1kw To 50kw

              in india, where agriculture is the base of the economy, though till date many of the area where land is very fertile, but due to the unavailability of the electric supply irrigation is almost impossible. Due to lack of electricity some farmers use diesel generator to power their pumps for irrigation which is very costly beacause deisel price rising everyday and farmers can't afford.                 to overcome this problem we are introducing our solar water pumping system at very affordable cost with high reliability. Solar water pumps running from solar lights and it is 100% free energy that we receive everyday from sun. Solar water pumps are specially designed to lift water for irrigation, horticulture farms, gardens, domestic use, drinking and other similar applications.   there are main 4 components in this system as discribed below. solar panel - uses to convert sun radiation into electricity solar pump controller - uses to convert solar panel generated electricty to 3phase,1phase or ec pwm (for dc pumpset) electricity as per pumpset type. solar pumpset - uses to lift water from deepwell,well,tank,canal,river or pond. solar panel structure - uses to fir solar panel. Structuse made of galvanised steel to reduce corrosion effect. accessories like = motor pipe, motor cable, dc cable, mc4 connector,civil work, nut bolt and pipe fittings.   salient feature of our solar pumping system. solar pumpset run by solar energy which is 100% free. No diesel no electricty supply required to power pumpset in this system. solar pumpset similar to regular pumpset like submersible,openwell, monoblock pumpset. But main difference is that solar pump energy efficiency much higher from normal running pumpset which is very important in this system. high efficenct solar pumpset. Available from 1hp to 50hp in submersible,openwell,monoblock type. our solar pump controller is most reliable and energy efficent and also very popular amongst farmer. solar pumping system available as per motor horse power(hp). For best performance of solar pumpset farmer has to tell us their source of water like deepwell,river or well? and depth of water. And daily water requirment by this information we can provide best suitable solar pumping solution to particular farmer.  

The device is efficient in pumping any liquid into our body. The tubing of the device comes in variable lengths to accommodate various needs.  

The device is efficient in pumping any liquid into our body. The tubing of the device comes in variable lengths to accommodate various needs.   Some salient features of our Infusion set for Infusion Pump are as follows:-Available in vented (for bottles and bags) and non-vented (for plastic bottles) Sharp spike for better penetration. ISO 8536-4 compliant spike ISO 594/1 & ISO 594/2 compliant end-connection. Latex Free.Soft, Clear and flexible Tubing. Sterile, Non-Toxic and Pyrogen Free. Sterile Pack - ETO (Ethylene Oxide) Sterilization validate according to Harmonized Standards.   Some salient features of our Infusion set for Infusion Pump are as follows:-Available in vented (for bottles and bags) and non-vented (for plastic bottles) Sharp spike for better penetration. ISO 8536-4 compliant spike ISO 594/1 & ISO 594/2 compliant end-connection. Latex Free.Soft, Clear and flexible Tubing. Sterile, Non-Toxic and Pyrogen Free. Sterile Pack - ETO (Ethylene Oxide) Sterilization validate according to Harmonized Standards.     62" IV Administration Set Non-Vented, Non-Vented Spike 10 Drops-ml with Guard/Drip Chamber 60mm/Fluid Filter-15 micron/ Latex Free 'Y'Site/Flow Regulator/Luer Tip Adaptor with Cap/3.0mm x 4.1mm PVC Tubing-Length 135+15cm/EO Sterile/Paper Poly Pack / Quantities per Carton = 300 pcs   62" IV Administration Set Vented, Vented Spike 20 Drops-ml with Guard/Drip Chamber 70mm/Fluid Filter-15 micron/ Latex Free 'Y'-Site/Flow Regulator/Luer Lock Adaptor with Cap/3.0mm x 4.1mm PVC Tubing-Length 135+15cm/EO Sterile/Paper Poly Pack / Quantities per Carton = 300 pcs

Catering to the need of chemical, petrochemical, pharmaceutical, pulp and paper and food industries. We are engaged in offering a wide array of Water Ring Vacuum Pump. We make use of cast iron with semi steel rotor, stainless steel for model RIW-30 to RIW-70, larger sizes are carbon steel with brass of stainless steel shaft sleeves for wetted parts in the manufacturing process of offered vacuum pumps, owing to which these have longer service life.   Applications : Vacuum Filtration Vacuum Distillation Moisture Extraction Condensation Removing water from paper pulp Draining paper Webs Saturating insulation materials, wood and textiles Evacuating condensers and piping Priming pumps Evaporating acids, blood and milk Drying resins, paints and chemicals Conveying Wheat, sugar and chemicals products Lifting and transporting wood and plates.

We are offering water filled submersible pumpset. These sturdy and robust submersible motors are made using advanced technology.

the working parts of the shreeji  pump consists of a multi-vane impeller mounted eccentrically in a round casing which is partly filled with liquid (usually water). As the impeller rotate the liquid is thrown by centrifugal force to from a liquid ring which is concentric with the periphery of the casing. Due to the eccentric position of the impeller relative to the casing and liquid ring, the spaces between the impeller vanes fill with liquid during rotation and any air or gas trapped in the impeller space or cell is compressed and discharged from the casing through the outlet part leaving the cell available to receive air or gas as it is presented to the inlet port of the casing. In addition to being the compressing medium the liquid-ring performs three other important functions. It absorbs the heat generated by compression and friction. It absorbs any liquid slugs or vapor entering with the gas stream. It will also absorb and wash out contaminants entrained in the gas.

Each pump is subject to rigorous test runs at our Solid Concrete Test Bed facilities in accordance with HEI Standards for LRVP’s (NASH ORIFICE METHOD ) / BS 1571 PT – 2 PNEUROPE  LTD.  Authenticating the Power, Vacuum and Air Displacement Parameters, each pump is certified for its performance.

The Liquid Ring Vacuum Pump has certain advantages such as : Material Of Construction: Considering corrosive conditions of gas to be handled, construction of vacuum pump is selected. It is available in complete cast iron, complete S.S., partial S.S. or partial bronze construction. Vacuum: Up to 50 mm Hg. Absolute using service liquid as water at 30°C. and higher (with water having less than 30°C) Higher Vacuum: Higher vacuum can be obtained by using special oil or other service liquid. Also high vacuum can be achieved by using Liquid Ring Vacuum Pump as backing pump in series with mechanical booster. Long Life and Low Maintenance Cost. : Pumps are robust in construction. Impeller with shaft is only moving part. Impeller has no contact with casing. Hence wear is negligible. These machines require very little maintenance and easy overhauling. Vibration- free and Noiseless Operation: The sealant ring acts as a sound damper. Gas flow is non-pulsation type. Hence machines are comparatively noiseless and vibration-free. Liquid and Vapor Handling: Liquid Ring Vacuum Pumps are capable of handling large quantities of vapor. It has also ability to handle small amount of liquid in the suction stream without causing damage. Handling solid particles: Continuous flushing action permits handling of certain fibrous materials Low Starting Torque : No Internal Lubrication Sealing: Sealing is generally by water lubricated asbestos rope while mechanical seal may be used for special application. Circulation Of Service Liquid: As per requirement , service liquid can be circulated in the pump in open system, partially closed system or completely closed system. Condensing Effect: When handling gas saturated with water vapor advantage can be taken of the condensing effect of the sealing ring. As Compressor: Liquid Ring Pump can work as compressor. Oil Free Gas : When pump is used as compressor, delivery of gas is absolutely oil free.

We are offering our clients V6 Deccan Submersible Pump Set, that are manufactured with strict quality control for years of efficient and reliable operation. The V6 Deccan Submersible Pump are unique in their design and conform to international standards.

We are offering monoblock pump sets, openwell pump sets, v-3 & v-4 submersible pump sets, v6 submersible pump sets self priming multistage pumps, centrifugal multistage pumps, s. S. Pumps, self priming muddy water pump poly propylene pumps, vertical inline pumps, vertical sump pumps, coolant pumps,multistage pumps, gear pumps lpg pumps, horizontal split casing pump, piston pumps, stainless steel sanitary, centrifugal pump, fuel transfer system

We are offering liquid ring vacuum pumps. The liquid ring vacuum pump is manufactured to handle liquid, water, gas and air movement applications in various industries. We design vacuum pumps based on widely acclaimed liquid ring technology to offer high end transfer solutions in industries. These are the best devices for handling applications like vacuum filtration, extracting moisture, removal of water from pulp during paper processing, mineral beneficiation, ash handling and much more. Available in 5000 m3 hr to 22000 m3 hr working capacity, this is the right device for use in sugar mills, oil refineries, distilleries, coal washeries, power plants and mines. It can serve wide range of applications in paper, chemicals, pharmaceuticals, fertilizer, railways and textile industries.

Liquid Ring Vacuum Pumps, direct drive vacuum pump, GCC Chemical Series Pump

Saga engineering manufacturing and exporting Vacuum Pump, which is a device that takes out gas molecules from a sealed volume in order to leave behind a partial vacuum. Saga engineering offering different types of vacuum pumps to customers with different uses  Applications The applications for liquid ring vacuum pumps are diversified and include drying, Condensing, Distilling, Impregnating, sterilizing. Evacuating, cooking, evaporating, draining, conveying, venting and sucking, liquid-ring vacuum pumps are being used in the chemical, petrochemical, Pharmaceutical, pulp and paper and food industries.  Some Specific Applications for Vacuum Pump Are: Draining paper Webs. Saturating insulation materials, wood and textiles. Evacuating condensers and piping. Priming pumps Evaporating acids, blood and milk. Drying resins, paints and chemicals. Conveying Wheat, sugar and chemicals products. Lifting and transporting wood and plates. Wide Choce Of Materials Standard materials of construction are cast iron with semi steel rotor. Shaft material is stainless steel for model SW-30 to SW-70, larger sizes are carbon steel with brass of stainless steel shaft sleeves for wetted parts. Alternate combination materials are available for special applications:  Oprating Principle Of Vacuum Pump The working parts of the SAGA - Vacuum Pumps consists of a multi-vane impeller mounted eccentrically in a round casing which is partly filled with liquid (usually water). As the impeller rotate the liquid is thrown by centrifugal force to from a liquid ring which is concentric with the periphery of the casing. Due to the eccentric position of the impeller relative to the casing and liquid ring, the spaces between the impeller vanes fill with liquid during rotation and any air or gas trapped in the impeller space or cell is compressed and discharged from the casing through the outlet part leaving the cell available to receive air or gas as it is presented to the inlet port of the casing. In addition to being the compressing medium the liquid-ring performs three other important functions. It absorbs the heat generated by compression and friction. It absorbs any liquid slugs or vapor entering with the gas stream. It will also absorb and wash out contaminants entrained in the gas.