Radiant Technologies Shahibaug, Ahmedabad, Gujarat

• Password Protection for Parameter setting • Serial interface (optional) • Digital calibration facility (optional) • Sensor Break Protection (For temperature) • Software Linearization for better accuracy.   • Input : Temperature Sensor Input : J, K, R, S, RTD (Pt-100) Industrial Input : 4 to 20 mA, 0 to 10 VDC • Output : Two or three relay, SSR, Alarm and 4 to 20 mA, 0 to 10 VDC (optional)

Accuracy : ± 0.5% of FSD

The newest version of our label detector is compact and high-speed. It is engineered to detect labels on a roll independent of color, printing or glossiness. High-speed applications are no problem for this sensor with its 600 μs response time. Separate outputs are available for the label and the label base. The ULB will automatically compensate for slowly changing ambient conditions.

Pepperl+Fuchs offers ring sensors with through-hole diameters ranging from 10 mm to 100 mm. Typical applications include wire-breakage monitoring and part-ejection verification. Slot sensors are available in slot widths from 2 mm to 30 mm.

SLA Series Single Beam Safety Sensors are workhorses on the factory floor. Versions with compact, die-cast housings can fit into tight spaces. Other versions with operating ranges to 65 m can easily be used to safeguard along conveyors and around larger machinery. Used together with the SafeBox Controller, all are approved to Type 4 (according to IEC 61496-1, -2) and suitable for Category 4 applications per EN-954-1.

Color : Black And Silver

Brand Name : ABB

Degree of Protection : IP66,IP67,IP69

Temperature Range : -20 to 60 Deg C

• Size : 48 x 96, 72 x 72, 96 x 96 (mm) • Power Supply : 230 VAC, 50 Hz Power Supply : 230 VAC, 50 Hz  

• Input : Proximity switch, Photo sensor, Limit switch, Encoder, 230 VAC pulse • Range : 0-999999 Total counts, Total meters • 0-9999 Batch count, Meters/min, RPM, Rate • Reset : Front Panel key / back terminal for remote reset / Auto Reset • Set point : Single/Dual set point • Output : 1CO, 5Amp, 230 V AC Relay / Buzzer Output • Setting : By front key pad, Thumbwheel for preset counter • Size : 48 x 96, 72 x 72, 96 x 96 (mm) • Power : 230 VAC, 50 Hz . • Up / Down Counting selectable. • Non-Volatile memory

Type : Photo Sensors

Frequency : 0-10Hz, 10-60Hz

Power Supply : Electronic

Application : Camera

Color : Black ,Blue, Red, White

SLA Series Single Beam Safety Sensors are workhorses on the factory floor. Versions with compact, die-cast housings can fit into tight spaces. Other versions with operating ranges to 65 m can easily be used to safeguard along conveyors and around larger machinery. Used together with the SafeBox Controller, all are approved to Type 4 (according to IEC 61496-1, -2) and suitable for Category 4 applications per EN-954-1.

A comprehensive range of M12 Micro DC cordsets is available in a variety of cable types, including PVC, PUR, and irradiated PUR in gray or yellow. Standard lengths range from two to ten meters, although custom lengths are offered. High pressure washdown, IP68/IP69K versions are also available.

Limit switch inductive sensors mount in the identical footprint as traditional mechanical limit switches. Their sensing ranges extend from 15 mm to 40 mm. Flat pack inductive products offer the longest available sensing ranges (50 mm). Both styles are available in multiple output configurations.

Pepperl+Fuchs introduces a full line of laser displacement sensors available in short-, medium-, and long-range models. From a short 100 mm diffuse range to an extremely long 250 m retro-reflective range, all models feature a Class 1 infrared or a Class 2 visible red laser for sensing. They also feature a Class 2 visible red laser for alignment. Outputs include analog, discrete, and several interface options.

Multi-port junction blocks are available in 4-, 6-, or 8-port models and greatly reduce installation times by consolidating all your field wiring into one compact block. They can be ordered in a variety of cable lengths and quick disconnects to suit your application requirements. LED indicators for power and status and an IP67 protection rating are standard on all models.

Insulation Displacement Connectors (IDC) provide the fastest method to add a connector to a cable by eliminating screw terminals, soldering, and the need to strip each conductor. No special tools are required. Pepperl+Fuchs Insulation Displacement Connectors can terminate a wide range of wire gauges, providing an efficient, tight, and reliable connection.

Brand : Pepperl Fuchs

Encoder Type : Incremental- Absolute

Entry/exit safeguarding is easily accomplished with SLC Light Grids, available in 2-, 3-, or 4-beam versions, with an operating range to 20 m. Classified Type 4 according to IEC 61496-1 and -2, they are suitable for Category 4 applications per EN 954-1. They can be used as a self-contained 2-piece system, or with the SafeBox Controller for applications requiring muting or integration with other safety devices.

•Competitively priced, high performance•M and SP units are suitable for both side-opening or centre-opening doors•Suitable for dynamic or static installations•IP65/NEMA 4 water and dust resistant•154 criss-cross beams•No on-site adjustment required•No special cables required•Immune to interference from reflection or sunlight•SMT electronics with proven technology and reliability•Easy installation without need to expose componentry•High impact vandal resistant materials•Tested to CE requirements•Tested to exceed requirements of EN81-70 and GB7588-2003•Two power supply options: 10-30V DC or 10-40V DC•Optically isolated solid state relay output. Two versions available: N/O or N/C contacts

• Input : 110 / 230 AC Selection. • Output : 24V,12V, 5V Single / Dual Selection. • Protection : short Circuits / OLP / OVP. • heigh Operating temparature up to 70 c. • Heigh efficiency long life & reliablity.

Type : Electric Receptacles

Material : Ceramic, Fiberglass, Metal, Plastic, Porcelain, Resin, Stainless Steel

Shape : Rectangular, Square

Application : Home Use, Plug Use, Power Supply

Color : Brown, Creamy, Dark Brown, Grey, Ivory, Light Grey, Off White, White

Feature : 4 Times Stronger, Easy To Use, Good Quality, Rigorous Quality, Safety Tested, Shocked Proof, Stylish Look

Temperature : High Temperature, Low Temperature, Medium Temperature

Ultrasonic double sheet detection detects the difference between no sheet (air), single sheet, and double sheets. The standard 18 mm diameter unit detects paper, thin plastics, and foils with weights from 10 g/m2 to 2000 g/m2. The sensor is equipped with four evaluation programs to detect a variety of materials. No TEACH-IN is required, and an output pulse extension of 120 ms is possible. The 30 mm ultrasonic double sheet detectors offer the same features as the standard version while providing a larger (50 mm - 150 mm) separation range and the ability to detect thicker materials. The UDCM-30GM-085 metal sheet detection sensor ensures that only one metal sheet feeds to the press by detecting the difference between a single or double sheet of metal.

The new Econo-Vue has all of the great features you would expect in a larger, more expensive sensor, yet it comes in a compact, short housing that provides greater mounting flexibility. Designed with OEMs in mind, the Econo-Vue is priced to beat the competition.