Copper / Raw Copper Dealers in Navrangpura, Ahmedabad

• Conductor Material: Copper
• Insulation Material: Rubber
• Conductor Type: Standard
• Voltage: 300V/500V
• Length: 10-20 Meters
• Rated Temperature: 200℃

As we are the name on which the customers lay their trust for quality, as we are supplying the finest ADCAB Multi Core Wire. The offered lot is prepared using the best in class raw material that is sourced from the reliable places only. Besides, we check it for quality prior to procurement.

Bare copper strands as per EN 60228, Cl. 6 Conductor Bunch Variants : Normal flex and Super flex Special Elastomeric Insulation : Thermoplastic Elastomer Vulcanizate PropertiesAcid Resistance Test : In sulphuric acid of specific gravity 1.28 at a temperature of 160°C to 210°C and check the cable after 60 hrs. No effect on insulation. Insulation free from deformation and shrinkage. Chemical Resistance :Resistant to ozone, acids, solvents, detergents, vaseline and oil.

• Color: Green
• Suitable For: Homes, Construction, Buildings
• Country of Origin: Made in India
• Brand: Polycab
• Wire Size: 1 sqmm
• Roll Length: 300 m
• Insulation Material: FR
• Conductor: Copper
• Voltage: 1100V
• Number Of Cores: Single Core

• Copper Purity: 99.99 %
• Oxygen: Less than 10 PPM
• Iron: NIL
• Other Impurity: NIL
• Copper Purity: 99.92 % min.
• Phosphorus: 0.04 To 0.08 %
• Iron: NIL
• Other Impurity: 0.030 % Max

Apart from all the products we offer a range of products to electroplating industries for quality copper plating, products in various shapes in both grades i.e. Phosphorised & Oxygen free grades. Shapes: » Oval, » Slabs, » Balls, » Rods, » Nuggets.Manufacturing Process :OF Grade: OF- Copper manufacturing starts with high-quality copper cathodes melted under strictly controlled conditions and cast in an inert atmosphere into Continuous casting rods. During this process the copper is not allowed to come into contact with air. These continuous casting rods are used for further processes. These processes are monitored closely and quality is assured by inspections at all stages. DHP Grade: DHP- Copper manufacturing starts with high-quality copper cathodes melted with precise % of phosphorous under strictly controlled conditions and cast in an inert atmosphere into Continuous casting rods. During this process the copper is not allowed to come into contact with air. These continuous casting rods are used for further processes. These processes are monitored closely and quality is assured by inspections at all stages.    Applications of Oxygen Free Copper / Phosphorised Nuggets, Balls & Anodes : » OFHC & Phos- Copper grade is the ideal material for electroplating on:-» Printed circuit boards » Rotogravures Printing Cylinders » Copper Bonded Earthrod » ABS Plastic » Monogram plating » Decorative Industries » And many other electroplating applications

Our well-structured warehouse is properly maintained and installed with diverse amenities required for the safe storage of the products. Moreover, we keep on updating the unit for enhanced safety. Buy excellence in the form of Electrical Wire at coffer-friendly prices, from us!

We are offering copper bus bars to cater to the ever-changing demands of clients, we bring forth copper components. These products are widely used in electrical panel board, transformer, bushing and switchgear industries. Owing to their optimum performance, user-friendliness and reliable service life, these products are widely applauded by the clients.

• Brand Name: RAYNA
• Conductor Type: Armoured
• Color: Red
• Rated Current: 11 Amp
• Crossectional Size: 1 Sqmm.
• Usage/Application: House Wiring
• Voltage: 240VAC 50Hz
• Material: Copper
• Insulation Thickness: 0.7
•  :  

• Material: Stainless Steel
• Shape: Rectangular
• Thickness: 12-15mm
• Length: 6-7ft
• Color: Silver
• Feature: Corrosion Proof

Stainless Steel Sheets find extensive use in different industries for various manufacturing applications. The sheets are manufactured in compliance with ASTM/ ASME Al SA 240 quality standards. To match with the variegated requirements of our precious client base, we offer these sheets in distinguished sizes. thicknesses and dimensions. Available Grades : 304, 321, 304L, 304H, 409, 309S, 309H. 410S 310H, 316. 316H 316L, 316 T1, 317, 317L 321H. 347, 347 H. 410 430 and 310S.

• Type: Electrical Wires
• Application: Electric Conductor, Heating, Lighting, Overhead
• Color: Black, Brown, Grey
• Conductor Material: Copper
• Insulation Material: PTFE

We are the main supplier of this product.

We are a leading manufacturer of Copper Bus Bars and Copper Flats. Our production range encompasses a wide spectrum of sizes. We offer flat bars with Corner radius, Full Radius and Sharp Edge. As an experience and reliable with fully integrated production, we have long been keeping pace with changes in the market. The latest trends involve additional alloying as well as Oxygen Free Copper - and we're involved in those things too. Use of Copper Flats / Copper Bus Bars : » Switchgear construction (low and medium voltage) » Power distribution systems (Bus Bars) » Transformers/Electrical components » Electrical Machine Construction » Wind Power » Automotives Width: 5 mm to 250 mm | Thickness: 1 mm and above Features of CML product: » Higher Conductivity for better current carrying capacity » Excellent dimensional control for superior contacts » Engineered for longer life » Customer Specification Solution » Crack Free Bends          

• Shape: Rectangular
• Tensile Strength: 260 Mpa
• Material: Aluminium
• Thermal Conductivity: 166 W/m.K
• Material Grade: 6061 T6
• Surface Treatment: Polished
• Density: 2.70 g/cm3
• Melting Point: 650 Deg C

Varieties of material are required for the purpose of the insulation of the various induction coils, For the requirement of the re-insulation induction coil and repair induction coil there are various complete range of the insulation materials are provided, Generally the insulation materials are mainly used for the purpose to insulate the various induction coils, To make this process to enhance the induction materials, there are various kinds of the other materials are required, As the induction coil will operates at the large amount of high voltage and the high temperature, the quality of the material which is choosing for this coil is playing a major role, Always choose a good quality material as a spare for the induction furnace coil, As there are various costly components used for the purpose of the certain spares of the melting furnace coil, there are lot of costly products are provided Basically the products must provide you the best service where none of the other products are carrying out in an effective manner with the best services. There are also certain important storage of induction coil material is needed to operate at the large amount of high voltage and the high temperature, the quality of the material which is choosing for this coil is playing a major role. These products are very costly and also made with very quality materials where everyone can withstand with the enormous service this spares are providing for the induction variable. We are also dealing these products in abroad countries like Kenya, Saudi Arabia, UAE, Iran, Nigeria, Sri Lanka and Poland.

We provide higher quality black annealed wires, which are made of superior grade raw materials and best known for their tensile strength and longer service life standards. If clients require, we can manufacture them according to customized needs. It is evident from its name that black annealed wire is known for its plain black color and is primarily processed into spool wire, coil wire and big package wire. However, on customers’ request, we can straighten and cut the wires into U type wire or cut wire. Apart from civil construction and agriculture, black annealed binding wires are also used in parks and daily binding.Some of the striking features of black annealed wires are high durability, fine finish, better quality and corrosion resistant. We manufacture black annealed wire in diameters similar to galvanized iron wire, i.e. from 5mm to 0.15mm (wire gauge 6# to 38#).

Copper Alloy Round Bars, Inconel Round Bars, Metal Round Bars

• Material: Copper
• Thickness: 1 mm and above
• Brand Name: Personifying copper
• Width: 5 mm to 250 mm
• Edge Type: Full Radius Edge, Radius Corner Edge, Square Edge
• Partition Board Space: Power Distribution, Telecommunication , Automotive Industries
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

• Standard: ASTM B280 standard, AS 1571 standard and EN 12735 standard.
• Temper: O60 or O50
• Package: individually sealed by plastic bag, and packed by carton box of 1-2 rolls

The insulation is a double layered structure made of cross linked foam polyethylene with closed cells. The insulation tube is extruded to ensure close tube contact to enhance dew point proofing properties. The insulation is covered with embossed polyethylene film to prevent the foam creasing. The insulation tube is good for Anti-UV, heat resistance, low water absorption. Insulated copper tube is mainly used for Installation of Air Conditioner, available in standard with lengths of 3-30m.

We hold expertise in manufacturing and exporting wide range of quality tested copper flats that are widely acclaimed among the different industries for its qualitative attributes.

• Type: Copper Rods
• Material: Copper
• Diameter: 3 -10m,10-15mm, 15-20mm
• Shape: Rectangular
• Application: Industrial
• Color: Brown
• Finishing: Non Polished, Polished
• Feature: Excellent Quality, Fine Finishing, High Strength, Perfect Shape
• Length Of Rod: 1 mtr

We are the main supplier of this product.

Vicor Groups manufactures round bars and round cornered square (RCS) bars in various grades and sizes which are suitable for machining, drawing, peeling as well as forging applications like close die forging and open die forging.

Cold rolled Stainless Steel Sheets of different grades conforming to AISI specifications and manufactured in the following grades, sizes and finishes Grades:Austenitic Series – SS301, SS304, SS304L, SS316, SS316L, SS321 Low-Austenitic Series – SS200 – KPT-1 Thickness (mm):Min.0.20 – Max. – 4.0 Width (mm) – 25-840 Edge Condition – Mill Edge and Slitted Edge Surface Finish No.1, 2D and 2B End Use Applications: LPG Gas Stoves, Kitchen Sinks, Utensils, Cutlery, Tubes, Pipes, Electronic Components, Furniture, Decorative Applications, Automobile parts, Structural fabrications and other similar applications

• Size: 100 KG TO 40000 TAN
• Color: Silver
• Brand Name: MAX INDUCTION FURNACE
• Features: High quality, Rigidness, Easy maintenance

We bring forth an impeccable range of Aluminium Sheets that is also available in different alloys. Being the leading Aluminium Sheets Exporters, Importers and Suppliers, we provide these Aluminium Sheets as per the demands of the customers and satisfy them with the flawless range of our Aluminium Sheets. Attributes Comply with international quality standardsPerfect finishHigh strengthLonger lifeHigh durability Variety Available Plain sheetsInsulation sheetsChequered sheetsIndustrial troughCircular corrugated sheetsStucco embossed sheetsReflective sheetsCaul boardPlywood sheetsColor coated sheets

Wire diameter 0.8, 1.0, 1.2, 1.6 mm. Wire weight 15kg. Precision layer wound. Highl environmentally compatible. Empty spools can be treated as metal scrap.

• Shape: Rectangular
• Thickness: 3 mm & above
• Width: 19 mm to 127 mm
• Presence of copper content: 99.99%
• Features: Durable, Robustness
• Finishing: Polished

We are the main supplier of this product.

Flexible Wires and Cables are used for transmission of low voltage signal within enclosed electronic equipment. Our Wires and cables are manufactured using preeminent quality of raw material at very reasonable price.The gamut of flexible wires ranges from 7/42 to 140/0.3. Flexible Wires are heat resistance and toughness makes our wires appropriate for hazardous and extreme environments. The hook-up wires are available in different cross sectional length ranging from 1/31 to 1/20.The range also includes house wiring Cables and submersible Cables used in submersible pumps. Our Hook Up Wires are extensively used in Electronic Equipment, Defense Equipment, Railways, Telephone Exchange, etc. Features:     Used in electrical applications like transformers, invertors and others.     High tensile strength, cut-resistant cable    Extremely constructive for miniature cable applications as thepossess     unique electrical properties.     Chemically inert Note: While Placing your Inquiry/Order Please specify              a). Type of conductor = ABC or ATC              b). Temperature range.              c). Specific colors of insulation.              d). Packing length.              e). Total requirment

A well known submerged arc welding wire supplier company.     CLASSIFICATION        : AWS/SFA-5.18 ER70S-7  CHARACTERISTICS    : Copper coated double oxidized solid wire for all position CO2 welding. The     special Characteristics are smooth and stable arc low spatter Thin and uniform copper coating ensure good conductivity usedull for high speed feeding APPLICATION  :Suitable for welding structural steels up to UTS 500 N/mm2 and Carbon steel and low alloy steels for single and malti pass with higher travel speeds compared to others filler metals.   SHIELDING GAS             :  Welding with CO2 gas and Ar+ CO2 gas mixture 

• Dia. 4.0 x L 305 / 330 / 355mm: 90 - 150 Amps
• Dia. 6.0 & 6.4 x L 305 / 330 / 355mm: 250 - 350 Amps
• Dia. 8.0 x L 305 / 330 / 355mm: 350 - 450 Amps
• Dia. 9.0 / 9.5 / 10.0 x L 305 / 330 / 355mm: 450 - 600 Amps
• Dia. 12.0 / 12.7 x L 305 / 330 / 355mm: 600 - 900 Amps

• Type: House Wires
• Material: Unilay
• Application: Domestic, Home, Industrial
• Color: Light Blue
• Feature: High Tensile Strength, Long Functional Life, Low Maintenance Cables, Good Quality
• Packaging Type: Roll