Safety & Pressure Relief Valves Dealers in Narol, Ahmedabad

• Size: 1/2” to 2”
• Temprature: Max 80 °C
• Pressure: up to 200 BAR

We Manufacture Quality Valves of almost all types for a wide spectrum of users in the Process & Chemical,Refineries & Petrochemicals,Fertilizers,Drugs & Pharmaceuticals,Thermal Power Stations, Nuclear & Atomic Power Stations,Textiles,Dyes & Intermediates, Paints & Varnishes, Sugar,Breweries & Distilleries,Soaps & Detergents, Steel Plants,Food & Oil Industry, Solvent Extraction Plants, Sewage, Effluent & Water Treatment, Cooling Water,Ship Yards and Marine Management,Water Works,Pulp & Paper,LPG Bottling Plants, Onshore & Offshore platforms, Slurry & Ash handling.

• Protection: IP 65
• Actuated: Electric

We offer Motorized Pressure Reducing Valve. cair on-off type motorized electrical actuator operated pressure reducing valve.

• Feature: Long life, Light weight
• Material: pvc
• Color: grey
• Country of Origin: Made in India
• Size: 63mm to 200mm

• Color: Blue
• Usage: Steam, Water, Gas
• Size: 1/2" to 24"

Pressure reducing valve for steam, water and gas applications

• BODY: ASTM A 216 Gr WCB
• TRIMS: 13 Cr | 18 Cr 8 Ni
• SPRING: SPRING STEEL | SPRING WIRE
• MFG STD: GENERALLY CONFORMING TO API 526 & IBR
• INSP & TEST STD: ASME PTC 25-3 | API 527
• MAX.SET PRESSURE: (STEAM) 17.5 Kg/Cm² (250 Psig) AT 427°C
• ENDS: INLET : FLANGED TO BS 10 TABLE “H”
•  : OUTLET : FLANGED TO BS 10 TABLE “F”
• HYD-TEST PRESSURE: BODY : 500 Psig (35 Kg/Cm²)
• SIZE RANGE: 25 MM TO 100 MM

• Material: Metal
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof
• Pressure: High, Low, Medium
• End Connection: Butt Weld, Flanged, Screwed
• Driven Type: Hydraulic

A Hydraulic Solenoid Valve Is A Solenoid Controlled Directional Valve Used In A Hydraulic System For Opening, Closing Or Changing The Direction Of Flow Of The Liquid. The Valve Operates With A Solenoid, Which Is An Electric Coil Wound Around A Ferromagnetic Core At Its Center. The Valve Consists Of Various Chambers Also Called Ports.

• Type: Normally Closed, Straight, Direct Acting, wet armature
• Connection Size: Inlet - 1/4" BSPF Outtlet
• Op. Pressure: 0 - 600 mm WC
• Flow: Max 5 LPM
• Coil voltage: 12, 24,36, 48 V DC

• Material: Stainless Steel
• Usage: Air
• Valve Size: 1/2" to 2 "
• Specialities: Sturdy design, Widely used in inorganic chemical industry ,Leak proof , Optimal performance.
• Item Code: 8414
• Valve Material: Stainless Steel
• Model Name/Number: SR-15
• Pressure: Low Pressure
• Media: Fuel, Water, Air, Gas
• Brand: Alpha
• Set Pressure: 200 Bar
• Size: 1/2" to 20"
• Port Size: 1/2"

The flow rate from the pump larger than the flow rate through the actuator The volume of a close system in reduced Threaded body, cartridge   sub plate type The load of the actuator rises Heat is introduced into a closed system Max Pressure 350 Bar The Hydraulic Resistance of the system rises.

• Material: Forged Steel & Investment Cast Stainless Steel
• Sizes: 15 x 25NB, 20 x 25NB & 25 x 40NB
• Rating: Suitable for Working Pressure upto 200 bar

• Size: 25NB - 150NB
• Inlet Pressure: 0-30kg/cm2

Pressure reducing station, sized and selected for controlling pressure in Natural Gas, Nitrogen, Hydrogen, LPG, Air, etc. Each PRS is sized and manufactured based on customers process parameters such as Flow Rate, Inlet Pressure, Outlet Pressure, other Safety requirements such as Safety Shut-off Valve with Over Pressure and Under Pressure seting, Diaphragm Operated Relief Valve, Flame arrester etc. can be incorporated as required. Active & Monitor Regulators with by-pass line is also possible. The unit gives excellent Downstream Control of Pressure with full safety.

• Size: 25MM TO 150MM
• BODY: ASTM A 216 Gr WCB; GUN METAL
• TERMS: 13Cr STEEL /18Cr 8 Ni
• SPRING: SPRRING STEEL
• MAX .STEPRESS: 14Kg/cm 2
• ENDS: FLANGED TO DIN 2545
• HYD-TEST: PRESS BODY 854 Psig ()60kg/cm 2

BODY : ASTM A 216 Gr WCB; GUN METALTERMS : 13Cr STEEL /18Cr 8 NiSPRING : SPRRING STEELMAX .STEPRESS : 14Kg/cm 2ENDS : FLANGED TO DIN 2545HYD-TEST : PRESS BODY : 854 Psig ()60kg/cm 2SIZE : 25MM TO 150MM

• Features: Manual-lever operated, Supervision of quality.
• Sizes: 25 NB to 150
• Item Code: BLV-3112

Assured accurate consistent downstream reduced pressure irrespective of fluctuations at inlet. Gives more latent heat, which is heat used in industrial equipments resulting in lower fuel consumption. - Designed as per best steam engineering practices- Assured accurate consistent downstream reduced pressure- irrespective of fluctuations at inlet- Safety valve sized for full discharge capacity of the PRS- Specially designed flow divider to ensure low noise levels- Rugged in design- Can be used in hazardous area without any certification- Operates even on low flow conditions- Fast response to pressure changes- Ready to install i.e. reduces installation time and field engineering- Maintenance free and user friendly - Both IBR Certified & Non IBR PRS are available 

• Material: SS 304/304L, SS 316/316L
• Size: 1/2"X 3/4" to 10" X 12"
• Medium: Water, Gas, Oil
• Temperature: -20° - 120°C
• End Connection: Screwed, Flanged End SS Pressure Reducing Valves

Our business is highly involved in offering a wide verity range of SS Pressure Reducing Valve manufactured as per international standard. These are highly used by municipal and private water supply companies for reducing the pressure of water in pumps. It is important equipment for safe water supplying system. The Valve works on spring balance principal. Our products are constructed using industrial’s best quality raw material which gives it security from damages during the supply process. These are widely used for domestic, commercial and industrial purpose. These are always acclaimed by its user owing to its unmatched features such as easy installation, safe working performance and low maintenance cost. We treat quality on priority basis, so every product produced by us has to pass different quality test. Any small to large equipment is not supplied to the client before the quality approval.   Features Water saving product Able to reduce high pressure Reduce the excess energy Easy to install with low maintenance cost

• Material: SS 304/304L, SS 316/316L
• Size: 1/2 to 4 Inch
• Application: Air, Water, Thermal relief
• Temperature: Upto 400°C
• Ends Type: Flanged
• Pressure: Upto 100 Kg/cm2
• Features: Impeccable strength. Dimensionally accurate. Unmatched durability.

Pressure k   x Close Riding on unimaginable volumes of streamlined smoothness, we are putting forth a magnificent extend of Plastic Pressure Gauge Cock. Being a quality-arranged association, we guarantee our customers that these items are the best in quality. Our talented experts just use fine quality crude material, while assembling the whole range. Also, our offered extent might be benefitted in an extensive variety of sizes and shapes, according to the necessities of our regarded customers.Features:» Rust proof» Enhanced durability» Compact design

• Brand Name: Alpha
• Size: 1/2" to 20"
• Media: Air, Water, Gas
• Set Pressure: 200 Bar
• Valve Material: Stainless Stee

• Pressure: up to 700 bar
• Material: Confidental
• Brand Name: Pladrac
• Valve Size: 06 -10-16-20
• Media: Hydraulic Oil
• Model Number: DPRH
• Minimum Order Quantity: 1 Nos