Safety & Pressure Relief Valves Dealers in Vatva, Ahmedabad

The flow rate from the pump larger than the flow rate through the actuator The volume of a close system in reduced Threaded body, cartridge   sub plate type The load of the actuator rises Heat is introduced into a closed system Max Pressure 350 Bar The Hydraulic Resistance of the system rises.

• Material: Stainless Steel
• Usage: Air
• Valve Size: 1/2" to 2 "
• Specialities: Sturdy design, Widely used in inorganic chemical industry ,Leak proof , Optimal performance.
• Item Code: 8414
• Valve Material: Stainless Steel
• Model Name/Number: SR-15
• Pressure: Low Pressure
• Media: Fuel, Water, Air, Gas
• Brand: Alpha
• Set Pressure: 200 Bar
• Size: 1/2" to 20"
• Port Size: 1/2"

• Type: Normally Closed, Straight, Direct Acting, wet armature
• Connection Size: Inlet - 1/4" BSPF Outtlet
• Op. Pressure: 0 - 600 mm WC
• Flow: Max 5 LPM
• Coil voltage: 12, 24,36, 48 V DC

• Material: Forged Steel & Investment Cast Stainless Steel
• Sizes: 15 x 25NB, 20 x 25NB & 25 x 40NB
• Rating: Suitable for Working Pressure upto 200 bar

• Material: Metal
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Feature: Blow-Out-Proof, Casting Approved, Corrosion Proof
• Pressure: High, Low, Medium
• End Connection: Butt Weld, Flanged, Screwed
• Driven Type: Hydraulic

A Hydraulic Solenoid Valve Is A Solenoid Controlled Directional Valve Used In A Hydraulic System For Opening, Closing Or Changing The Direction Of Flow Of The Liquid. The Valve Operates With A Solenoid, Which Is An Electric Coil Wound Around A Ferromagnetic Core At Its Center. The Valve Consists Of Various Chambers Also Called Ports.

• Pressure: up to 700 bar
• Material: Confidental
• Brand Name: Pladrac
• Valve Size: 06 -10-16-20
• Media: Hydraulic Oil
• Model Number: DPRH
• Minimum Order Quantity: 1 Nos

Our organization is counted among the reliable manufacturers, suppliers and importers of a wide gamut of Proportional Valves. These valves are widely used in various industries such as construction and engineering industry. All the valves offered by us are manufactured using high grade raw material in adherence with international quality standards. Adding to this, we offer these valves in various dimensions and other specifications as per the need of our respectable clients. Other information: Various valves such as proportional pressure relief valve, proportional pilot operated pressure relief valve, proportional pressure reducing valve, proportional directional control valve, proportional flow control valve, proportional flow control pressure compensated, Proportional flow control three way pressure compensator are provided Used for automated electro hydraulic control applications PQ blocks of various capacities and cutup mounting proportional valves are available.

Pressure k   x Close Riding on unimaginable volumes of streamlined smoothness, we are putting forth a magnificent extend of Plastic Pressure Gauge Cock. Being a quality-arranged association, we guarantee our customers that these items are the best in quality. Our talented experts just use fine quality crude material, while assembling the whole range. Also, our offered extent might be benefitted in an extensive variety of sizes and shapes, according to the necessities of our regarded customers.Features:» Rust proof» Enhanced durability» Compact design

• Material: SS 304/304L, SS 316/316L
• Size: 1/2"X 3/4" to 10" X 12"
• Medium: Water, Gas, Oil
• Temperature: -20° - 120°C
• End Connection: Screwed, Flanged End SS Pressure Reducing Valves

Our business is highly involved in offering a wide verity range of SS Pressure Reducing Valve manufactured as per international standard. These are highly used by municipal and private water supply companies for reducing the pressure of water in pumps. It is important equipment for safe water supplying system. The Valve works on spring balance principal. Our products are constructed using industrial’s best quality raw material which gives it security from damages during the supply process. These are widely used for domestic, commercial and industrial purpose. These are always acclaimed by its user owing to its unmatched features such as easy installation, safe working performance and low maintenance cost. We treat quality on priority basis, so every product produced by us has to pass different quality test. Any small to large equipment is not supplied to the client before the quality approval.   Features Water saving product Able to reduce high pressure Reduce the excess energy Easy to install with low maintenance cost

• Material: SS 304/304L, SS 316/316L
• Size: 1/2 to 4 Inch
• Application: Air, Water, Thermal relief
• Temperature: Upto 400°C
• Ends Type: Flanged
• Pressure: Upto 100 Kg/cm2
• Features: Impeccable strength. Dimensionally accurate. Unmatched durability.

Assured accurate consistent downstream reduced pressure irrespective of fluctuations at inlet. Gives more latent heat, which is heat used in industrial equipments resulting in lower fuel consumption. - Designed as per best steam engineering practices- Assured accurate consistent downstream reduced pressure- irrespective of fluctuations at inlet- Safety valve sized for full discharge capacity of the PRS- Specially designed flow divider to ensure low noise levels- Rugged in design- Can be used in hazardous area without any certification- Operates even on low flow conditions- Fast response to pressure changes- Ready to install i.e. reduces installation time and field engineering- Maintenance free and user friendly - Both IBR Certified & Non IBR PRS are available 

• Size: 25NB - 400NB

Pressure control valve, The Model SC-1110 Modulating float control valve to maintain constant liquid level in storage tanks and reservoirs by compensating for variations in supply or demand, keeping the tank full. The Ball type float operated Pilot Control is installed at the high liquid level in the tankreservoir and is connected via tubing or pipe to the main valve. As the liquid level changes, the float control proportionally opens or closes the main valve, keeping the liquid level nearly constant.

• Brand Name: Alpha
• Size: 1/2" to 20"
• Media: Air, Water, Gas
• Set Pressure: 200 Bar
• Valve Material: Stainless Stee

• Size: 25MM TO 150MM
• BODY: ASTM A 216 Gr WCB; GUN METAL
• TERMS: 13Cr STEEL /18Cr 8 Ni
• SPRING: SPRRING STEEL
• MAX .STEPRESS: 14Kg/cm 2
• ENDS: FLANGED TO DIN 2545
• HYD-TEST: PRESS BODY 854 Psig ()60kg/cm 2

BODY : ASTM A 216 Gr WCB; GUN METALTERMS : 13Cr STEEL /18Cr 8 NiSPRING : SPRRING STEELMAX .STEPRESS : 14Kg/cm 2ENDS : FLANGED TO DIN 2545HYD-TEST : PRESS BODY : 854 Psig ()60kg/cm 2SIZE : 25MM TO 150MM

• Features: Manual-lever operated, Supervision of quality.
• Sizes: 25 NB to 150
• Item Code: BLV-3112

• Color: Blue
• Usage: Steam, Water, Gas
• Size: 1/2" to 24"

Pressure reducing valve for steam, water and gas applications

• Valve: ASTM A 351
• Seat & Seals: PTFE (silicon/viton EPDM on request)
• Pressure: 2 to 110 bar
• Temprature: Upto 90° C (150° on request)
• Coil Voltage: 12v,24v,48v,110v,230v AC/DC
• Insulation: H class Suitable Upto 140 °C
• Coil Encloser Modes: IP20 / IP65 / IP67 (Flame proof/Explosion proof as per IS 2148 Std for Class ||A||,|| B||,||C zone)
• Col Rating: Continuous Rated
• Media: Hot Water / LD OL / water / Corrosive Media

• Brand Name: VEER
• Material: SS/Casting
• Pressure: 12 kg

We offer safety valves. We are one of the leading manufacturers, suppliers and exporters of air compressor, air receiver tank & safety valve.

• Protection: IP 67
• Actuated: Electric

“cair” offers on – off type 220v ac single phase quarter turn motorized electrical actuator operated pressure reducing valve electrical actuator details: manufacturer : cair euromatic automation brand : cair model : mod basic characteristic : on – off type travel : quarter turn rotary type indicator : continuous position indicator power supply : single phase body material : aluminium alloy on power fail : stay put manual override : wheel type pressure reducing valve: manufacturer: cair euromatic automation brand: cair body: cast iron / ductile iron / stainless steel seat: buna - n / ptfe / viton diaphragm: buna - n / ptfe / viton o ring: buna - n / viton spring: s. steel ends: flanged end media: air / water / oil / gas / chemical / steam

• Feature: Long life, Light weight
• Material: pvc
• Color: grey
• Country of Origin: Made in India
• Size: 63mm to 200mm

• Country of Origin: India
• Temperature Pressure: High Temperature Pressure
• Media: Water
• Type: Back Pressure Valve
• Usage: Water Fitting
• Finishing: Polished
• Automatic Grade: Automatic
• Overall Length: 6-10 Inch

A Back Pressure Regulating Valve (BPRV) is a type of valve used to regulate the pressure of a fluid, typically a liquid, in a pipeline or system. It is designed to maintain a constant pressure upstream of the valve, even when there are fluctuations in flow rate or downstream pressure. Rain Power Filtration Company is a manufacturer of water filtration and treatment systems, including BPRVs. Their BPRVs are typically used in applications such as water distribution systems, irrigation systems, and industrial processes.

Pressure valve, Pneumatic Diaphragm type, Spring & Diaphragm type neoprene rubber diaphragm with canvas reinforced, Pressure controller are in different range as requirement It Attach with outlet of valve and regulating actuator for controlling line pressure.

We are offering Pressure Regulating Valve from India.

• BODY: ASTM A 216 Gr WCB
• TRIMS: 13 Cr | 18 Cr 8 Ni
• SPRING: SPRING STEEL | SPRING WIRE
• MFG STD: GENERALLY CONFORMING TO API 526 & IBR
• INSP & TEST STD: ASME PTC 25-3 | API 527
• MAX.SET PRESSURE: (STEAM) 17.5 Kg/Cm² (250 Psig) AT 427°C
• ENDS: INLET : FLANGED TO BS 10 TABLE “H”
•  : OUTLET : FLANGED TO BS 10 TABLE “F”
• HYD-TEST PRESSURE: BODY : 500 Psig (35 Kg/Cm²)
• SIZE RANGE: 25 MM TO 100 MM

• Brand Name: AV
• Material: Gunmetal
• Size: 1/2" to 3"
• Application: Industrial
• Features: Corrosion resistance, High durability, High strength, Strong construction
• Item Code: SV-02

We Offer the Best Quality Pressure Regulating Valve to Our Clients. Available At the Market Leading Price Range, These Pressure Regulating Valves are Well Reckoned for Their High Efficiency and Durability. These Pressure Regulating Valves are Checked Under the Strict Company Norms By Experts. Owing to all These Factors, Its Demand Has Increased Significantly in the National Market. attributes adjustable for Pressure and Flow Durableaccuratelong Service Life used For high Pressure to Low Pressure

Dharmi Engineers HPXV1 series High Pressure Ball Valve Valves offer 10000 psi rated valves in sizes up to 2" and are suitable for steam, hydraulics, oil and gas production and all high pressure fluid applications. Dharmi Engineers is specialized in Design, Manufacture and Supply of High Quality Ball Valves, and other Industrial Valves, Sight Glass and Strainer. A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you "see" the valve's position.

• Material: Stainless Steel
• Valve Size: DN 25 TO DN 150
• Structure: Regulating
• Brand: VANAZ
• Model Name/Number: R SERIES

• Material: Mild Steel,Aluminium, MS
• Valve Size: Up to 1000 LPM
• Brand Name: Verco
• Usage: Hydraulic
• Pressure: High Pressure
• Model Name/Number: DBW series, DB series, BG series