Reshilp Equipment India Private Limited Rakanpur, Ahmedabad, Gujarat

The steering roller web guides correct the alignment of the web upstream of the printing process. They are available in mono or dual roller versions, low profile (WR-S) or with a single, smaller mono-roller mounted on a single motorized slide for small scale applications.

The pivoting guides are available in varies models and sizes, from the smallest - WG.100 up to the WG.2000 used on machines with rollers that are more than 800 mm wide. The correction limits are +- 75 mm, and the correction speed is between 15 and 46 mmsec.

Precise colours, image quality: thanks to the full-digital technology, based on CMOS sensors, a resolution of 3.2 million pixels, the Xenon lamps featuring minimum brightness variations and the motorised 20X zoom , REVISION II always has excellance in its sights.

Allow the edge reading of any kind of material these are perfectly interchangeable depending on the needs of the moment. The SU-M25 ultrasound version has a small size and a high degree of IP protection, which makes it suitable to use in dusty environments or in presence of liquids.

The U series is the most widely used version, supported by 2 ball bearings and available with graphite (for filtered air and water) or silicon carbide (for oil and water) seals. Available in one or two way versions and sizes ranging from ¼” to 2½”.

These heads are available for diameters ranging from 3 to 12, in mono- and bidiametral versions. The monodiametral versions are available with a central hole for centring the reel, or a flange for ejecting the core.

The couplings are indispensable when it is necessary to use reels with cores that are a different size to those normally used for production. The couplings or adaptors can be used to adapt the existing shaft to the core of the reel to be processed (from 3” to 12”) rather than produce a new expanding shaft.

The rotating heads exploit the reel movement in order to block and centre it; this system can be used to reduce damage to the cardboard cores so that they can be re-used. Available from 3to 12.

The R series is the most widely used solution for transferring the working pressure to pneumatic clutches and expanding shafts. Suitable for use at high speed, they rotate on two ball bearings. Available in sizes ranging from 18” to 1”.

Manually or pneumatically operated callipers (positive and negative), can be used to obtain high braking torque and are ideal for emergency braking on any machine used for processing material on reels. A cheap and simple solution, even for the most outdated machines.

The N series is supported by 2 carbon-graphite bearings, suitable for use with steam, water and diathermic oils at temperatures of up to 316°C. The treated carbon-graphite is suitable for spherical sealing; the seal is perfect and maintenance is quick and easy. Available in sizes ranging from ¼” to 3”.

The MX 16.3 chuck is equipped with a pneumo-mechanical mechanism. Using the air pressure, a cone expands the keys mechanically in order to lock the reel core in place. The chuck is small but robust and can support reels of up to 2000 Kg (the pair). The basic version is expandable and can be used with 70 and 3” cores. There are a number of mechanical adaptors available for larger cores, by simply inserting them on its body the MX 16 chuch can used to block 4”, 5” and 6” cores. These chucks can be mounted on shaftless winders and unwinders.

Used for applications that require very low web tensions and precisely controlled material tension, such as the textile and metal wire processing sector. Nominal torque from 2 to 5 Nm.

Amplifiers for microprocessor controlled digital load cells, with a special HWSW configuration that reduces signal processing time. They require a 24Vdc power supply, and feature cell inputs that can be set to mV or 4-20 mA, and digital and analogue outputs.

Available in two versions, with feet or flange, and chuck (SVPSVF series) or slide (SAPSAF series) opening; maximum reel weight 1600 kg. Interchangeable inserts available in a range of shapes and sizes, including customer’s specifications.

The eleflex series of electro-magnetic powder brakes range from the smallest b.121 to the largest b.5000. They can all be fitted with either a fan or a radiator and guarantee precise torque control. We have been manufacturing this reliable product for over 20 years and continue to develop new solutions in order to improve its performance, guaranteeing even lower residual torque for critical applications or where the working tensions are very low. Nominal torque from 12 nm to 500 nm.

Their small size means that it is possible to install one or more calliper in order to obtain the desired braking torque, there are two available versions; Positive for small and medium power braking or fast stop braking negative for safety and emergency braking.

Fp.25 is an analogue current regulator that guarantees that the regulated torque remains stable; available with or without transformer. Taurus is a microprocessor controlled digital current regulator that can be used for that open and closed loop regulation.

Pneumatic brakes with high heat dissipation. Available with 250 mm and 300 mm disks, they guarantee up to 1520 Nm of torque and 6 kW of available power.

Disc cluthes and brakes , with a modular calliper system, 0.75 to 4620 Nm of torque,and up to 15 kw of available poswer. These brakes are the ideal solution for large scale and high speed reels.

The SAFSAP series is also available with axial deflection for more precise positioning on the reel. They have a travel of +- 25 mm and can be supplied with fixtures that accept Re brakes.

These actuators, which are applied during the reel unwinding and winding phases, perform rapid and precise movements, thanks to the use of a recirculating ball screw. The available modules permit stroke of between +- 25 mm and +- 100 mm and a maximum thrust of 3100 N at 48V.

Expanding strip, keyed and shafts manufactured in aluminium or steel or Ergal. For applications where unwinding and rewinding must be perfectly concentric, the Centrimax model is capable of centring the material perfectly on the reel, thanks to the pneumo-mechanical control system.