Reverse Osmosis Plant Equipment Dealers in Ctm, Ahmedabad

• Capacity ( litres per hour): 50 LPH
• Type Of Machines: Reverse Osmosis System
• Plant Application: Industrial RO Plant
• Design: Standard
• Automatic Grade: Semi-Automatic
• Installation/Civil Work: Available
• RO Capacity (LPH): 200-500
• Chiller Cooling Capacity (Tons): 1 ton

• Fuels: Oil / Gas Fired
• Capacity: 50,000 Kcal/Hr. to 6 Lacs Kcal/Hr.,

• Type: Water Filter
• Certification: CE Certified
• Color: Creamy, Off White, White
• Driven Type: Vacuum Toilets
• Voltage: 110V, 220V, 380V
• Weight: 1-2kg, 3-4kg ,5-6kg ,7-8kg, 9-10kg
• Power: water filter
• Electric, Solar: 10-15kw, 15-20kw ,20-25kw ,5-10kw
• Usage: Water Recycling

• Brand Name: Ally
• Body Materail: MS
• Max Water Recovery Rate: 45 to 50%
• Number of Filtration Passes: 3
• Automation Grade: Semi-Automatic
• Number of Membranes in RO: 1
• Purification Type: RO
• RO Capacity (Liter/hour): 200-500 (Liter/hour)

• Brand Name: Aadeeah
• Material: Steel
• Finishing: Raw
• Color: Silver, Grey And Multiple
• Condition: New
• Power: 50kw -2000kw
• Power Source: Electric
• Application: Industrial Use
• Certification: Nil
• Length: Costomized
• Voltage: 220V, 380V
• Packaging Type: Carton Box, Open body
• Size (mm): Costomized
• Dimensions (mm): Costomized
• Temperature Capacity: 100-250c
• Specialities: Rugged Construction
• Type: Hot Water Generators, Hot air geberators.
• Thickness: 6to 20'mm
• Efficiency: 70to 82
• Warranty: 6months
• Country of Origin: India
• Diameter (mm): As per Design
• Max Temperature: 150 To 250 Degree C
• Fuels: Solid fuel
• Min Heat Output: 50kw
• Max Heat Output: 2500 kw
• Weight in Kg: 1000-10000kg

• Country of Origin: India
• Material: Stainless Steel
• Application: Reverse Osmosis
• Voltage: 220V
• Finishing: Polished
• Power: 1-3kw
• Driven Type: Electric

An EDI RO plant is a type of water treatment plant that uses two different processes to purify water: Reverse Osmosis (RO) and Electrodeionization (EDI). In the RO process, water is forced through a semi-permeable membrane that removes impurities such as salts, minerals, and other contaminants. This process produces a high-quality permeate stream that is free of most impurities.

• Capacity: 1 to 10 lac/ hr
• Approx Price: Rs 1.51 Lakh / Unit

We make available Hot Water Generators which are reckoned for their robust make and long service life. The basic materials that we use for the manufacturing of our entire range are thoroughly checked against numerous quality parameters. Thus, we make sure that we deliver faultless products to the clients. We have superior storage facility to keep large product range that we make available. In order to meet elevated quality norms, we keep it updated with modern work methods.

• Driven Type: Electric
• Automatic Grade: Semi Automatic
• Power: 1-3kw

• Product Name: na
• Color: na
• Color: na

·         PACKAGED DRINKING WATER ·         MINERAL WATER BOTTLE ·         MINERAL WATER JAR ·         MINERAL WATER POUCH ·         MINERAL WATER BOWL / CUP

• Power: 5-10kw

Acuapuro Water is updating regularly new blogs on Water Treatment Plants, Pet Blow Molding Machines, Ro Water Machine Industries in Ahmedabad, Gujarat, India. 📌 Our Customer Installed Mineral Water Bottling Plant Business in South Africa By #AcuapuroWater | Number 1 Mineral Water Plant Business 💸   📌 Our local offices are in Maharashtra, Bihar, Kerala, Tamil Nadu, Andhra Pradesh, Assam & Odisha.   📌 We are also supplying in Global Countries like Bangladesh, Bhutan, Nepal, Sri Lanka, USA, Ethiopia, Tanzania, Dar es Salaam, Congo & All African Countries & Much More.

You can purchase supreme quality Hot Water Generator from us at reasonable prices. Our range of Hot Water Generators can easily operate on different fuels. We offer our esteemed customers with efficient Hot Water Generators that are fabricated using advanced machinery and skilled labor. We are eminent Suppliers and Exporters of Hot Water Generator from Ahmedabad, Gujarat. Our range of Hot Water Generators is highly durable, robust and functions fluently. 

• Driven Type: Solar
• Application: Water Recycling

1 years warranty Pump and SMPS

Situated in Gujarat(India), ours is the name reckoned for providing quality products at competitive price. Feel free to approach us, if seeking for top-of-the-line quality Hot Water Generators!

Placed in Ahmedabad(India), is capable of catering to local as well as domestic markets without any hassle. We, along with our veteran packaging professionals, ensure that the packaging products commence keeping the packaging guidelines in consideration. We strictly use quality packaging material to evade loss during transit.

We offer a wide range of industrial reverse osmosis Plants, according to the need for tap water, brackish water & sea water application. The production range starts from 100 LPH (Liter per hour) to 100 M3 per hour for 400 TDS to 45,000 TDS and reduce TDS @ 90-99% Reverse Osmosis has gained wide acceptance and popularity due to its simple operation and the ability to withstand variations in feed water quality.     All our industrial reverse osmosis Plants are carefully customized and configured to suit the individual requirement of the output water, which varies from normal drinking application to the specific usage, such as food Processing, pharmaceuticals and boiler feeding requirement. This is done through an in depth and complete chemical analysis of the feed water available to us in specific location.     Salient Features Produce high-quality dematerialized water Most modern membrane technology Modular design Low water-rejection rate Low operational and maintenance costs Applications for Reverse Osmosis SystemsThe ideal applications for RO water filtration System include: Safe Drinking Water Boiler Feed Water Ion Exchange Pre-treatment Beverage Production Pharmaceuticals Food Processing Industries Fisheries Industries    

We are offering reverse osmosis system. principle of reverse osmosis system reverse osmosis (ro) is the process, in which water is pressurized through a semi –permeable membrane. As a result of this, as shown in the below depicted schematic diagram, water will pass through the membrane surface while the dissolved and particulate materials are left behind. When the pressure is applied to the concentrated solution, water is forced through the membrane from the concentrated side to the dilute side. This process is known as“ reverse osmosis.” reverse osmosis (ro) is a process of physical separation of dissolved solids and minerals present in water. This technology uses the principle of osmosis, wherein the mineral concentration of raw water is reduced by applying high pressure through a semi-permeable membrane. ro technology offers maximum flexibility to meet diverse requirements. Our customised software, landmark helps customers gain the maximum 'ro advantage', by helping to make the right selection. landmark considers your inlet water quality and capacity requirements and offers you optimised combination. This choice is dependent on different flux rates, pump models, membrane types and inlet water quality. It gives the right solutions, reduced what is reverse osmosis system? the reverse osmosis system is composed of two major parts, high pressure pump and the r.o. Membranes. The initial purified water production rate is measured at this pressure. it appears that there are long term benefits to be gained by operating at lower percent water recovery, particularly in reducing maintenance to the systems and minimizing precipitation problems which may arise due to operator error. it is important to realize that the purified water from a reverse osmosis system is delivered essentially at atmospheric pressure, usually to a vented storage tank. In general, it cannot be operated by opening and closing valve in the product water line (unless special pressure relief is provided). The reason for this is that the high pressure in the system drives the water across the membrane. And no flow of water would be possible if the pressure on both sides of the membranes were same. If, for some reason, the product water line is closed, while the system is operating, the pressure would build up. Of course, if the purified water side of the system was strong enough, the pressure would end up the same as the pump pressure, but at that point, no water would flow across the membrane. In reality, the p.v.c. Piping on the product water side normally would not tolerate such high pressure. the membrane is capable of taking 600 psi of “forward pressure”. I.e. From the direction of the supply water side to the purified water side. However, they are susceptible for it’s tolerance limit for “ back pressure.” i,e, from the direction of purified water side to the supply water side.” so, one should take care while operating the system. the quality of purified water produced by reverse osmosis process is roughly a constant percentage of the feed water. For example, if the feed water is entering at 50 ppm , the purified water may be about 1 to 2 ppm. (i.e. 96.00 to 98.00% rejection of dissolved minerals.). For another example, when the feed water is entering at 500 ppm, the purified water would be from 10 to 15 ppm. Usually a conductivity meter or tds meter is used to measure the mineral contents. the membrane based technology the application of reverse osmosis to the solution of problems in water treatment requires an understanding of the basic mechanisms involved in the process, the limitations of reverse osmosis and the pre treatment requirements. reverse osmosis utilizes the unique properties of a “imported” semi- permeable membrane to allow fluid to pass while restricting the flow of dissolved ionic material. With pressure applied to impure water on one side of such membrane materials, pure water will pass through, leaving most of the impurities behind. The rejection of the dissolved ionic material is a function of both molecular weight and ionic charge. For example, we can expect a nominal 90 % rejection of sodium chloride, which means that the product water passing through the membrane will have a concentration of salt approximately one-tenth that if the feed water. The rejection of calcium carbonate (hardness) will be nearly 95%. While most metallic salts will be rejected at a rate of 98% to 99%. the rejection of non- ionic or organic material is primarily done by mechanical filtration. advantages compact and modular ro blocks easy installation, operation and servicing specific selection possible from a wide range high level of plant automation visual monitoring system (vms) for ease of trouble-shooting stainless steel multistage centrifugal pump; inline suction and delivery allows easy maintenance and access online product water quality monitoring membrane and pump protection features minimum pipe length to reduce system resistance easy servicing with qrc (quick release coupling) material of construction: pvcss application ceramic chemicals dairy fishing food & beverages hospital hotel pharmaceutical pulp & paper textile

SS Membrane Housing...   SPECIFICATION SSS4040E-S SSS4040S-S SSS4040E-S SSS4040S-S SSS8040S-S SSS8040S-S Vessel Diameter 4 inch 4 inch 4 inch 4 inch 8 inch 8 inch Membrane Length 40 inch 40 inch 40 inch 40 inch 40 inch 40 inch Port Design End Side End Side Side Side Port Connection Threaded TC Threaded TC Victaulic TC Design Pressure 150 psi 150 psi 150 psi 150 psi 300 psi 300 psi Test Pressure 225 psi 225 psi 225 psi 225 psi 450 psi 450 psi Operating Temperature -7°C - 49°C -7°C - 49°C -7°C - 49°C -7°C - 49°C -7°C - 49°C -7°C - 49°C Operating pH Range 3-11 3-11 3-11 3-11 3-11 3-11 Cleaning pH Range 2-12 2-12 2-12 2-12 2-3 2-3 No. of Membranes 1 - 4 pcs. 1 - 4 pcs. 1 - 4 pcs. 1 - 4 pcs. 1 -7 pcs. 1 -7 pcs. M°C - Body SS 304 SS 304 SS 316L SS 316L SS 304 SS 304 M°C - Lid ABS Plastic SS 304 ABS Plastic SS 316L SS 304 SS 304 Body Silt Seamless Silt Seamless Silt Seamless   Membrane components... Dow, GE, K°Ch, Hydranautics, Saehan, Toray, TRISEP membrane components of other standards   Quality Assurance... 100% pressure vessels were tested with 1.5 times design pressure 100% pressure vessels have their own numbers, we can trace them

• Max Water Recovery Rate: 50-55 %
• Chiller Cooling Capacity (Tons): 1 ton
• Automatic Grade: Automatic
• Number of Membranes in RO: 4
• Plant Application: Industrial RO Plant
• RO Capacity (Liter/hour): 2000-3000 (Liter/hour)

• Feature: Simple to operate ,Superior functionality ,High filtration capacity.
• Application: Chemical industry , Beverage industry

Oil or Gas Fired Horizontal Hot Water Generator t can be supplied with the rugged Ross make burner or any other imported burner. The reverse flue design achieves higher efficiency & saves precious fuel. Each Astra undergoes a complete firing test, including a thorough check up of all electrical components & adjustment of burner for efficient combustion.

• Material: Stainless Steel
• Automatic Grade: Automatic
• End cover material: ABS
• Max working pressure: 250 psi
• Surface Treatment: Chrome Coated
• Length: Up to 4 feet

Widely used in the boiler feed applications, the Boiler Feed RO Plant is used for effectively removing unwanted water impurity and scale producing salt contaminants ions. These Boiler Feed RO Plants are Industrial Plants that are acclaimed for their hassle-free performances. We are among the trustworthy Manufacturers, Exporters and Suppliers of the Boiler Feed RO Plant. Highlights Easy to installSimple to operateLong-lifeHassle-free operations

The Reverse Osmosis Plant manufactured by us carries out the reverse osmosis process which is done for the removal of practically all inorganic salts by membrane technology. In this process, water is passed through cellulose acetate/poly amide semi permeable membranes at pressure above Osmotic pressure. Due to high pressure the salt and pure water separates through semi periable membranes. The process of demineralization by ion exchange has the limitation when TDS of raw water is above 1500 ppm, or it is not a viable process for brackish water and salty water contains higher dissolved salts. To overcome such difficulty reverse osmosis technique is used removes all the unwanted inorganic salts like calcium, magnesium, sodium, chloride, sulphates, nitrates, silica etc. From the water having high TDS, the process is most economical. It is possible to achieve conductivity below 1 microseimenns/cm2 of treated water and silica below 20 ppb when RO+DM with proper scientific design depending on raw water quality.

The vertical four pass Hot Water Generator is suited for various industries across India and abroad in the rapidly changing and undependable energy environment. Thermotech's generous design of vertical heaters coupled with integral furnace gives you an assurance of the rated output on any solid fuels without compromising on performance. Thermotech can deliver sustainable solution to meet your process requirement and thus improve process consistency and reduce downtime leading to further increase inprofitability. The system is suitable for major food processing industry like pharmaceuticals, Tea processing, coconut processing, corn drying, seasame dring, onion drying, etc. The system is suitable to heat water up to 250 Deg. C with combustion of any solid fuels like wood, coal, bagasse, corn cobs, agrowaste, lignite, petcoke, etc.. System is designed with all safeties & controls well defined for safe operation without lesser maintenance.

• Brand Name: Accurate
• Material: FRP
• Capacity: 10 LPH
• Usage/Application: Water Purification
• RO Capacity: 2000-3000 (Liter/hour)
• Power Supplier: 110V -220V
• Style for Purifier: Cabinet
• Operating Principle: RO

We are supplier of Reverse Osmosis System

For the safe storage of our offerings, we have installed our own storage facility. Laced with modern amenities, our facility helps us in furnishing urgent requirements of the clients at a time. If you are looking for purchasing qualitative and cost efficient Industrial Ro Plant, contact us today!Area of Applications : Cooling water in the Industries. Useful in Boiler feed. Painting. Agricultural Production. Electronics. Packaged Drinking Water. Food and Beverages. DG Set & Power Plants. Textile Industries. Pure water Generation pharmaceutical Industry. Pharmaceuticals Green House

• Application: Water Purification
• Capacity: 500-1000 ltr
• Material: FRP
• Model Name/Number: STIEE-RO 1
• Water Storage Capacity: 2000 L
• Purification Capacity: Up to 1000 LPH
• RO Capacity: 500-1000 (Liter/hour)
• Purification Type: Reverse Osmosis Technology
• Type Of Purification Plants: Reverse Osmosis
• Automatic Grade: Automatic
• Max Pressure: 1.5 MPa

Right from the inception, we have been engaged in offering premium range of RO systems to our clients. These systems are known for offering pure drinking water at cost effective prices. Designed as per the latest technology, these are one of the smartest water purification systems for effectively removing dirt, dust, bacteria, harmful chemicals and other impurities. Features Super Space Saving Design Produces safe, great tasting water Easy to install complete kit included Removes the widest spectrum of drinking water contaminants Some of the basic advantages of these water purifying systems are mentioned below: Removes impurities Water Net and does not use chemicals Removes unnecessary salts and minerals Removes bacteria and viruses Enhances the taste of water Eliminates impurities that cause high blood pressure, kidney stones, indigestion, gastric bacterial diseases Saves money as you need not buy expensive and dubious bottled mineral water Even treats the water of bore-well and overhead tanks and makes it drinkable Can be used in homes, offices, hotels, restaurants, schools, colleges, hostels, clinics, hospitals, laboratories.