Road Construction Machinery Dealers in Vastral, Ahmedabad

• Application: ROAD CONSTRUCTION
• Weight: 100-1000kg
• Feature: Optimum Performance, Rust Resistance
• Power: 75-100Bhp
• Driven Type: Hydraulic
• Warranty: 5yrs
• Ground Clearance: 100-200mm

• Fuel Tank Capacity: 5.50 Liters.
• Static Weight: 800 kgs

Due to its compact design, the VIBROTECH T-80 is the ideal roller for small repairs in both Base and asphalt courses. Widening of roads, Horticulture, Landscape Gardening, Internal roads in complex.Its low overall height and closely set drums provides a clear view of the entire working area, ensures high manoeuvrability.Inspite of its relatively low weight, the use of double drums, ensures high Compaction performance & has necessary gradient climbing ability.NO GEAR BOX, HYDRUALIC DRIVE hence VERY LESS DOWN TIME, No failure. Total Maintenance Free Machine.Speed for both Forward & Reverse remains same & being Hydraulic, it has more power then Mechanical Type Rollers.

A highly advanced technology for quick & clean road sweeping. The machine is attached to a 35 HP Tractor, quickly collects dust & dirt leaving the streets & roads clean & neat. Empties the dirt at the collection point.

• Type: Thermoplastic Road Marking Machine
• Certification: ISO 9001:2008 Certified
• Weight: 100-1000kg
• Color: Grey
• Condition: New
• Automatic Grade: Manual
• Warranty: 1year
• Driven: Mechanical
• semi automatic: Silver and Red

We have advanced packaging systems available to make sure that the products are packed using the experts approved packaging stuff. We source the material from the leading vendors in the industry. Our raw materials are essential bottleneck assets and thus these are carefully selected by our expert quality auditors after checking against varied quality parameters.

• Weight: 200 kg ( Approx)
• Hydraulic Drive: 1 Geromotor
• Maximum Operating Pressure: Up to 180 Bar
• Minimum Hydraulic Oil Requirement: Up to 20 Litres per Minute
• Working Width: Up to 2300 mm
• Waste Collection Container Volume: Up to 240 Liters
• Main Brush Diameter: Up to 520 mm

• Weight: Net Weight
• Type: 1510 ES
• Fuel: Diesel
• Fuel Tank Capacity: 5
• 676 Kg: Operating Weight ,En500
• 681 Kg: Engine
• Manufacturer: Greaves
• Starting system: Electrical Start
• Output kw / rpm: 7.5 /3000
• Battery: 12V,44 AH
• Compaction: Static linear load , Kg/cm
• 5.2: Operating speed, Km/h
• 0-3.6: Gredeability %
• 35: Drive system
• Fully Hydraulic: Frequency , Hz/Rpm
• 61/3660: Amplitude(mm)
• 0.45: Centrifugal force , kN
• 20: Sprinkler system
• Water Tank Capacity , Lts: 30 Ltr
• Type of sprinkling: Gravity

Owing to our vast experience in the concerned industry, we are offering a comprehensive range of Trimix Flooring Machine. The offered Trimix Flooring Machine is designed using optimum grade components and the latest technology. We offer this Trimix Flooring Machine in different models and other related specifications to suit ever-evolving requirements of our prestigious clients. Moreover, our entire range is rigorously tested by our experts on well-established parameters in order to deliver a flawless range at the client's end. Features: Less power consumption High efficiency Optimum performance Please do inquiry by call only. Request Callback Other Details: Minimum Order Quantity: 1 Piece(s) Port of Dispatch: Ahmedabad Delivery Time: As per the order

Our thermoplastic road marking machine is designed for fast, efficient heating of thermoplastic material & application. Our road marking machine equipped with mercury temperature gauge meter to measure temperature of the paint and also gives flexibility to do marking of different widths.

• Country of Origin: India
• Type: Concrete Trowel Machine
• Application: Road Construction
• Color: Blue
• Power: 7-10bhp
• Driven Type: Mechanical
• Brand Name: Weber

• Country of Origin: India
• Type: Kerb Paver Machine
• Color: Yellow
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 10 HP
• Driven Type: 10 HP Diesel Engine
• Warrenty: 1 Year
• Brand Name: Aimax
• Weight: 350 kg
• Capacity: 60 - 70 Mtr/Hr
• Method: Extrusion ( Ramming Mechanism)

• Brand Name: Shreeji

We are offering power trowel cum floater is use for smoothness on rcc flooring surface. Dual speed system: machine can work as power trowel & power floater. Blade degree is also changed on running of floater machine. Power 1.5 hp, 3phase r.p.m. 1400 2800 max. Reach about 3 m machine weight with blade approx 70 kg output shaft speed 115 57 r.p.m. Floating dish 980 mm

• Weight: 51 Kg
• Handle Length: 1600 mm
• Brand/Make: ShreeVinayak Industries
• Diameter: 600 mm
• Blade Thickness: 3 mm
• Motor Power: 1 HP
• Phase: 3 Phase

We are counted as a prominent name in this domain, involved in offering a wide range of Dynapac Walk Behind Roller to our clients. This Dynapac Walk Behind Roller is extensively used in different industrial and commercial regions for making a channel in transport various material from one place to another. Our products are tested on different quality parameter before dispatching to the market.

• Machine Diameter: 1000 mm
• Floating Disc Diameter: 980 mm
• Drive: 2 HP / 3 HP, 3-Phase, Dual Speed Electric Motor
• Volt: 415 V, 50 HZ
• Machine Weight: 2 HP - 95 KG & 3 HP - 110 KG (Without Disc)
• Disc Weight: 17-18 kg

Operator can easily access all the controls from handle by holding the clutch to operate the machine & by releasing it instantly stop the machine. Now no need to pre-check the rotation of blades before operate the machine as it has integrated spring coupling systems to protect blades from rotate it to counter clockwise.

Hand Push Road Marking Machine     100 Kg. Capacity of Stainless Steel Tank and agitator with vertically mounted agitating arm. Front Mounted Pointer Guide adjustable according to laying shoe size. LPG Heating System: LPG Supply through heavy duty ring type burners for material tank and screed box. Hand Torch for safe lighting of burners. The Material tank shall have an outer jacket fitted with Dial Type Temperature Gauge 30o C - 400 o C to maintain the uniform Temperature of the material. Screed Shoe: Available in 10 cm and 15 cm width provided easy adjustment of thickness adjustment with rotating knob. Glass Beads Dispenser: Available in 10 cm and 15 cm width adjustable for minimum discharge of glass beads @300gms /m2. The dispenser shall be linked via chain drive from wheels of the machine so that quantity of dispensed glass beads is constant irrespective of speed of the machine and thereby assuring constant quality beads every time at any marking speed. Glass Beads Storage Box with window. Auto Lockable Rear Wheel capable of straight & fine alignment of markings track locked position or 360 degree swivel. Tool Box for tool kit & storage etc.

We are counted among renowned Manufacturers and Suppliers of Road Broomer Machine. We offer Road Broomer Machines in various specifications to meet varied requirements. We can provide customized solutions as well. User Friendly Easy to Operate, Extraordinary Strength, Consistent Performance, Break Free Operation.

• Brand Name: Maniar & Co.
• Operation Mode: Automatic
• Usage: Office

• Feature: The whole machine is compact and ingenious, easy to operate.

The equipment comes with option of electric motor and diesel engine support so as to deliver consistent work performance. Some of its features include allowing for easy start compact designed finish for easy handling; layouts; offer long service life.

We are counted amongst the prominent Technical Road Kerbing Machine Exporters from India. The Road Kerbing Machine, offered by us, are manufactured using optimum quality materials that ensures high durability, tensile strength and resistivity to adverse conditions. The unmatched quality and unsurpassable performance has also attracted various national as well as international clients to place repeated orders for the Road Kerbing Equipment. Moreover, some of the salient features of the Road Kerbing Equipments are as mentioned below: We manufacture and supply different types of Kerbing Machines & Road Kerbing Machines for construction of roads to our wide client base. Kerbing Machine Backed by our team of expert engineers and associated industry professionals, we are a successful manufacturing and supplying road kerbing machines. These machines are developed with in the strict standard specifications in our latest infrastructure facility. Manufactured from high grade material, these are widely used by our clients in road construction projects. Every part of the machine is also made to undergo stringent testing to ensure in them optimum functionality standards. FEATURES : Simple and light handling.Sturdy wheels on bearings.Emergency switch to stop.Adjustable blade guard.Depth cutting indicators. Road Kerbing Equipment As a quality product of our manufacturing unit, kerbing machines and road kerbing equipment are widely used by our large client base in various road projects. These machines are built under strict guidelines as per international quality standards. We take utmost care of the requirements of our clients and are equipped latest technology based process machines to ensure smooth handling of the involved functions. FEATURES : Reliable equipment.Smooth operation.Low operating cost.Easy serviceability.Technically competent strength.

• Power: 2.25KW/3HP
• wer Supply: 415Volts, 3 Phase,50 Hz
• Rated Current: 5.0A
• Output Speed: 80 / 120 rpm
• Max. Reach: 2.7 Mtr.
• Max. Weight with floating disk: 95 Kg.
• Outer Diameter: 914mm
• Blades Diameter: 815mm
• Disk Diameter: 900mm

Powerful impacting force. Easy Starting, low noise, convenient maintenance. Attractive and impressed appearance. Aluminum case is good-looking,light weight and better shock proof. Relay work of four springs ensures the compacting force balances. High quality lower shell accepts more compacting force and offers splash lubrication which can lower the noise and temperature. Two shock-absorbing rubbers can reduce the handrail vibration and improve operating comfortableness.

Road Construction Equipment, Loader, Road Construction Machinery

vacuum de watering system, builder tower hoist, Tower Hoist, weigh batchers

Concrete Batching Plant, Wet Mix Plant

slipform kerbing machine, Concrete Batching Plant