Rotameters Dealers in Ahmedabad

The rotameter is an industrial flowmeter used to measure the flowrate of liquids and gases. The rotameter consists of a tube and float. The float response to flowrate changes is linear, and turndown is standard. In the case of our rotameters, far greater flexability is possible through the use of correlation equations. The rotameter is popular because it has a linear scale, a relatively long measurement range, and low pressure drop. It is simple to install and maintain.   Principle of Operation:The rotameter's operation is based on the variable area principle: fluid flow raises a float in a tapered tube, increasing the area for passage of the fluid. The greater the flow, the higher the float is raised. The height of the float is directly proportional to the flowrate. The float moves up or down in the tube in proportion to the fluid flowrate and the annular area between the float and the tube wall. The float reaches a stable position in the tube when the upward force exerted by the flowing fluid equals the downward gravitational force exerted by the weight of the float. A change in flowrate upsets this balance of forces. The float then moves up or down, changing the annular area until it again reaches a position where the forces are in equilibrium. To satisfy the force equation, the rotameter float assumes a distinct position for every constant flowrate. However, it is important to note that because the float position is gravity dependent, rotameters must be vertically oriented and mounted. Rotameter Flowmeter Selection: The key questions which need to be answered before selecting a rotameter are- What is the minimum and maximum flow rate for the flow meter? What is the minimum and maximum process temperature? What is the size of the pipe? What accuracy do you need? Do you require a valve to regulate the flow? What is the maximum process pressure?

• Brand Name: Charun
• Country of Origin: Ahmedabad
• Application: For liquid & gas
• Type: Three (Glass Tube Rotameter, Acrylic Tube Rotameter & Metal Tube Rotameter)
• Meter Size: 15, 20, 25, 40, 50, 80
• Max. Operating Pressure (Kg/Cm2g): 25, 25, 15, 12, 10, 07
• Scale Length: 180-200 mm

We provide best quality Rotameter for Liquid or Gas. These Glass Tube Rotameters are manufactured using best quality material for longer working. With best quality material and with the help of our skilled working staff we provide best quality Rotameter, which are highly accurate and are calibrated to give perfect reading of the Media flowing. These Rotameters are available in Basic three types namely Glass Tube Rotameter, Acrylic Tube Rotameter & Metal Tube Rotameter. The types are as to suit various needs of the industry as per various media properties. With various combinations we are able to cater all types of need of Flow measurement for almost all type of Liquids or Gases. Features Dowel Pin, side plate constructionDetachable flow scalesExternally adjustable packing glands Specifications Connections can be rotated 360 degree at 90 degreeLaminated safety glass shieldingScale length of 180-200 mm Meter Size 15, 20, 25, 40, 50, 80 Max. Operating Pressure (Kg/Cm2g) 25, 25, 15, 12, 10, 07

• Country of Origin: India
• Material: Plastic
• External Thread: 21mm
• Internal Hole: 13.5mm
• Weight: 257g
• Overall Size: 176 x 87 x 32mm

• Accuracy: +/- 5 % of Full Scale reading
• Maximum Fluid Temperature: 93 Degree C
• Maximum Working Pressure: 17.2 bars
• Meter Body Material: Machined Acrylic
• Adapters Material: Polypropylene
• Guide Rod: 316 SS
• Calibration Fluid: Water,Specific Gravity 1.0

• Country of Origin: India
• Size: 25 NB
• Type: Rotameters
• Material: Glass
• Application: Industrial
• Color: Transparent
• Feature: Easy To Maintain
• Finishing: Polished

A water rotameter is a type of flowmeter that is used to measure the flow rate of liquids, specifically water. It consists of a vertical tube with a float inside that is free to move up and down with the flow of the liquid. The tube is tapered so that the cross-sectional area decreases as it goes down, which causes the flow to speed up and the pressure to drop.

• Brand: Aris
• Usage/Application: Water
• Range Ability: 10000 lph
• Tube Body Construction: Glass
• Scale Range: 0.4 to 2.4
• Accuracy: 99%

• Accuracy: +/- 2% F.S.D.
• Temperature Ratings: Maximum Operating Temperature rating is 50 o C
• Repeatability: 0.5 %
• Connections: Flanged OR Screwed OR Rickover Joint OR Hose Nipple
• Rangebility: 10:1

“FLOWTECH” Acrylic Body Tube Variable Area Flow Meters (Rotameters) are intended for general in line metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Acrylic Body metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered Acrylic body Tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

• Country of Origin: Made In India
• Size:  1/2 To 6 Inches
• Tube Body Construction: PC
• Operating Pressure: 10 Kg/cm2
• Maximum Temperatures: 60 Degree C
• Float Material: ABS
• Usage/Application: Water
• Brand: CWC
• Range Ability: 50 m3/hour

We are counted among the prominent manufacturers, suppliers and exporters of the rotameter. These rotameters are durable and have excellently polished on piece meter body. We make use of the best-grade stainless steel to manufacture the rotameter. One big merit of our rotameter is that it can be easily installed. features durableeasy to read direct reading permanent scale (gpmlpm and scfm)sturdy adapters with high grade viton7 o-ring sealsseparate mounting screws are not requiredbulkhead nuts attached directly inside the panel#316 stainless steel floats and float guideshighly polished one piece meter body advantages acceptable in direct sunlight applicationsoptional adjustable flow control valveeasy to disassemble industrial application petroleum industryscientific research and medical treatmentchemical industrywater industry

Avail the premium range of Rotameter, which is exclusively used in line installation with flanged & screwed connections. Rotameter offered by us manufactured under the strict observation of skilled engineers ensuring high utility, accurate output and long service life. We are offering Rotameter at most competitive prices. Why Our Rotameter? Excellent resultsHigh performanceLow maintenance costSturdy constructionUser-friendly

• Usage/Application: Industrial
• Tube Body Construction: Acrylic
• Float Material: PTFE
• Maximum Temperatures: 150 Degree C
• Operating Pressure: 10 Kg / cm2
• Max Reading: 10 LPH
• Min Reading: 0 LPH

• Material: SS 316
• SKU: Aster SS/PP Flange Rotameters
• Category: ASTER Rotameters
• Pressure: 8 kg/cm²
• FLOW RANGE: 1200 LPH up to 60000 LPH
• FLANGE CONNECTION: 25NB, 40NB, 50NB, 65NB, 80NB

In order to maintain the balance with the changing trends in the industry, Stainless steel METAL TUBE Rotameter are now made available in the market. We are one of the most dependable marketer and distributor of this product and offer wide assortment of Stainless steel METAL TUBE Rotameter to the industry. This rotameter is majorly used for the quantification of movement made by bulk fluid. Our offered rotameter which are manufactured by some of the top notch companies of the industry is designed to measure the flow velocity, under high-temperature conditions. The rotameter which we make available in the market comes with a closed metal tube, for calculating the flow rate of fluid. Features: Durable and Long service life Offers High performance Damage resistance Robust construction We are offering this product at a very reasonable price to fit the customer budget. For more info get back to us.

• Application Media: Air, Water
• Power Supply: 12-28V DC
• Protection Class: IP67
• Maximum Allow Pressure: 250 Bar
• Water Flow range: 2.5 l/h to 200 l/h
• Air Flow range: 0.07 to 4500m3/h

  SSS SERIES PIPELIN ROTAMETER...

The company has come up as a highly trusted Manufacturer and Supplier of Rotameters in Ahmedabad. The premium quality Rotameters are manufactured by inculcating the latest technologies and techniques. The professionals fabricate these Rotameters using premium grade basic materials and the products are precisely designed and easy to handle. Features : Corrosive applications flow meterCWC Series polycarbonate flow meterChemically resistant molded polycarbonate

• Application: Laboratory, Industrial

  We are the leading traders of wide array of Acrylic Body Rotameter meant for liquids and gases. We always lay importance to the quality for satisfying the needs of our clients. Hence we supply only products of quality companies that manufacture products in accordance with the international quality standards. These products are popular for their incredible operation, precise outcome and durability.   Application: Water Salt water Air Nitrogen Hydrogen Natural gas

Manish Agencies is one of the prominent organization engaged in manufacturing and supplying a stylish range of Rotameters in India.

We are a leading rota mete suppliers in gujarat, india. We are offering wide range of rota meter that are useful for various applications. We are located at ahmadabad, in india. Glass rotameter, acrelic rotameter. Different type of range. Such as 500lph, 1200lph, 3200lph. Panel mount rotameter. Etc.

Rotameter, Stainless Steel, manometers, stainless steel brass fittings

tube rotameter, Flow Meter, level gauge

Rotameter, Noble Metal Thermocouples, Pneumatics Fittings, pressure gauge

reverse osmosis rotameter, reverse osmosis dosing pump