Rotary Lobe Pumps Dealers in Ahmedabad

• Features: Manual Control By-pass, Relief valve, Jacked Rotor case, Electric Heating Tapes.

Pumps are meant for high Mechanical Effiency means less energy Consumption, Lower Cost Smaller Motors, Lower Drive Costs. Easy-clean pump head which is ideal for in place cleaning, or can be rapidly stripped for manual cleaning, without disconnecting the pipe work. Positive, Uninterrupted Displacement by specially designed rotors creates a steady, gentle pumping action which does not shear, agitate or aerate the product. Pumping chambers without pockets or crevices to harbor bacteria or contaminants. No Contact between moving parts and no internal bearings in pump head. Solid stainless steel, ASI 316 quality, pumps head, rotors and shafts. Food quality rubber covered and plastic rotors are also available. Robust, Cast Iron gear case enclosing oil Lubricated rolling bearings are precision timing gears. Generous distance separating the pump head from the gear case. End Connection Port Flanged Threaded – Customized.

• Max. capacity: 124 m3/h (547 GPM)
• Max. pressure: 10 bar (145 psi)
• Max. temp: 100 °C (212 °F)
• Max. viscosity: 100 000 mPas / cP

TopLobePlus hygienic tri-lobe rotors Materials: stainless steel (316L)

• Type: Rotary Lobe Pumps
• Color: Grey
• Condition: New
• Rated Power: 2hp
• Driven Type: Electric
• Pressure: 10-20Bar
• Warranty: 1year
• Country of Origin: India
• Brand Name: ALFA
• Application: VISCOUS LIQUID TRANSFER

• Type: Rotary Lobe Pumps
• Weight: 20-300kg
• Condition: New
• Automatic Grade: Manual
• Rated Power: 10hp
• Driven Type: Electric
• Pressure: 10-20Bar, 20-40Bar, 40-60Bar
• Warranty: 1year
• Brand Name: Acme

•       Applications: Dairy •       Pharma •       Chemical •       Beverages Plant •       Bakery •       Canning •       Cosmetics •       Meat Products

• Max Flow Rate: 300 M3/HR
• Head: 200 METER HEAD
• Brand: KSB GERMANY
• Model: VITALOBE
• Discharge pressure: Up to 30 bar
• Fluid temperature: -40 to +200 °C
• Volume displaced: Up to 10.5 l per evolution
• Pay Mode Terms: T/T (Bank Transfer),Other

Lobe pumps are used in a variety of industries including, pulp, chemical, food, beverage, pharmaceutical, and biotechnology.  They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics. Rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage.  They are also used to handle slurries, pastes, and a wide variety of other liquids.  If wetted, they offer self-priming performance.  A gentle pumping action minimizes product degradation.  They also offer reversible flows and can operate dry for long periods of time.  Flow is relatively independent of changes in process pressure, so output is constant and continuous. How Lobe Pumps Work: Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.  As the lobes come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the lobes as they rotate. Liquid travels around the interior of the casing in the pockets between the lobes and the casing -- it does not pass between the lobes. Finally, the meshing of the lobes forces liquid through the outlet port under pressure. Lobe pumps are frequently used in food applications because they handle solids without damaging the product. Particle size pumped can be much larger in lobe pumps than in other PD types. Since the lobes do not make contact, and clearances are not as close as in other PD pumps, this design handles low viscosity liquids with diminished performance. Loading characteristics are not as good as other designs, and suction ability is low. High-viscosity liquids require reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.Advantages:  Pass medium solids No metal-to-metal contact Superior CIP/SIP capabilities Long term dry run (with lubrication to seals) Non-Pulsating discharge

• Capacity: up to 1,00,000 LPH

SRL ALS MSE -Series Rotary Tri Bi Lobe Pumps are positive displacement ( pd ) external SS-316 Rotary Tri Lobe Pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid. As the lobes come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the lobes as they rotate. Liquid travels around the interior of the casing in the pockets between the lobes and the casing and it does not pass between the lobes. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.

• Pressure: 550 psi
• Rated Power: 1 Hp
• Country of Origin: Made in India
• Motor Phase: Three Phase
• Material: Mild Steel
• Automation Grade: Automatic
• Max Flow Rate: 200 kg/cm2
• Frequency: 50 Hz
• Voltage: 440 V

• Capacity: up to 18000 LPH
• Head: up to 6.0 Kg/Cm2 pressure
• Size: 1 “ to 2”
• M.O.C.: SS-316

SRL-Series Lobe Pumps are positive displacement ( pd ) external SS-316 Rotary Tri Lobe Pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid. As the lobes come out of mesh, they create expanding volume on the inlet side of the pump. Liquid flows into the cavity and is trapped by the lobes as they rotate. Liquid travels around the interior of the casing in the pockets between the lobes and the casing and it does not pass between the lobes. Finally, the meshing of the lobes forces liquid through the outlet port under pressure. Application :   Lobe pumps are frequently used in food applications because they handle solids without damaging the product. Ideal for pumping highly viscous liquids like Butters, Chocolates, Fruit Pulps, Flavorings, Frostings, Fats & Oil, Yeast Slurry, Sugar Syrups, Creams, Meat Chunk, Soup & Sauces, Tooth Paste, Resins, Jams, Jellies chocolate mixtures, Ice Cream, essential oil, shampoo , cheese, Face cream , Lotions, Baby Foods, tomato ketchup, fruit juice etc.

• Color: GREY
• Material: SS-316 AND SS-316L
• Max Flow Rate: 480 LPM
• Head: 10 METER
• Model Name/Number: LOBE-300
• Size: 80X80 MM
• Capacity: 28.800 TON
• Liquid Temp: 150 DEGREE

Lobe Pumps are used in a variety of industries including, pulp, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.Rotary Lobe Pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.   Advantages: • Pass medium solids • No metal-to-metal contact • Superior CIP/SIP capabilities • Long term dry run (with lubrication to seals)• Non-Pulsating discharge

hygienic rotary lobe pumps, Air Operated Double Diaphragm Pumps

Lobe Pump, Cement Plant, Dairy Equipment, paper mill machinery