Rotocone Vacuum Dryer Dealers in Ahmedabad

• Weight: 100-200kg
• Color: Light White
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Application: Drying

• Application: Chemical, Pharmaceuticals, Food products.
• MOC: Mild Steel / Different grades of Stainless Steel (cGMP Model is available).
• Utility: Steam, Hot Water, Electrical heater, Thermic oil or hot air.

UNI-MECH Rotocone Vacuum Dryer is most useful for drying heat sensitive materials used in chemical and pharmaceuticals with weldedMineral Wool / Glass Wool insulation. It consists of a conical Shell with a jacket for steam or oil heating and leak proof arrangement of Vacuum. The indirect heating process is carried out under vacuum; recovery of solvent is possible by condensing the vapor generated during operation. The cone rotates at a slow RPM to ensure gentle agitation of the entire mass.

The Rotocone dryer is appropriate for drying of materials that cannot stand high temperature, easily oxidized materials and poisonous in nature materials. The drying unit comes equipped with lump breakers that breaks large lumps and eventually powders them. Also, it aids in achieving supreme dust control and also offers profits of effective charging and discharging of materials. The drying unit is also equipped with lump breakers that breaks large number of lumps and also eventually powders them. The rotary action of the dryer with the mechanical action of breakers cuts down the drying time and also leverages a lump free product at the end.   Characteristic features Inner parts and contact parts made with SS 316 material Condenser and receiver made with SS 304 material Butterfly valve equipped with manual wheel Dry vacuum seal for water and vacuum side FLP control and motor panel enclosed in SS304 panel Digital temperature indicators available at hot water inlet and outlet, vacuum gauge in vapor line and also the pneumatic valve Provision for nitrogen discharge with interlocking to isolation valve Dial type vacuum gauges available on the cone Engrossed safety guards for security and safety purposes Drain plug and safety valve on HW/ steam jacket Positioning wheel also available for the cone Vacuum loading system used for the loading of wet material into the cone Low and fast drying temperature available Hot water system available for tank and circulation pump in the vacuum dryer Smooth drying possible with comprehensive designing Flexible to clean internal surface of Rotocone vacuum dryer

• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Volume: 100-3000 L

The Rota Double Cone Vacuum Dryer is suitable for drying the material which can not operate at low Temperature easily oxidized, poisonous in nature. The Double Cone Rotating Vacuum Drying Equipment is a new drier that integrates mixing and drying in the one body and equips with condenser and vacuum pump. Therefore the vacuum drier is formed. The drier is advanced in design, simple in inner structure, easy for cleaning, to discharge all raw material, convenient in operation and improving work environment. Meanwhile raw material is rotating accompanying with the rotating of container; raw materials cannot be accumulated onto the wall of container, so it has high efficiency heat transfer and high speed drying which save energy. Raw materials are dried uniformly and have good quality at low temperature. It can widely apply to dry raw materials of pharmaceuticals, chemical, Pesticides, foodstuff , dyestuff and so on industries. The equipment is in conformity with the requirements of "GMP". If the solvent does not recover, the condenser may be not used. 1. Material that cannot undertake high temperature.2. Material that is easy to oxidize.3. Material that do not permit to destruct.4. To recover material with residual volatile.5. Material with vigorous irritative and toxicity The Rota Cone Vacuum Drier consists of a jacketed double conical shell rotating around 6 RPM with under the state of vacuum inside the shell, pass steam or hot water in to jacket for heating. The large heating surface area presented by the internals of the cone ensures uniform drying of the product, as the product gently tumbles while the cone rotates slowly. The vaporized steam can be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat. The diffusive action induced by the tumbling cone constantly presents a fresh layer to come into contact with the indirectly heated walls of the shell, the dry speed of raw material is quickened and uniform drying efficiency is raised too. A well designed sealing system enable maintenance of deep vacuum inside the shell, and also ensures positive circulation of a heating media in the jacket. salient Features : Design is cGMP - Current Good Manufacturing Practices compliance All Product contact parts AISI 316/ 316L & non contact parts AISI 304. Simple & compact Design for Easy to operate, clean, convenient & user friendly. Automated mixing and Drying process in single bowl. Dust free operation. High vacuum operation Low temperature drying. Solvent recovery Continuous rotation of container, material will make complex impacting motion in the container and reach to uniform mixing and drying at low temperature. Continues vacuum maintenance during process. Vacuumized closed system with condenser, Receiver for solvent recovery & Cyclone separator to recovery the solid particle. Rapid & Complete discharge / Zero holdup after discharge The product dried is homogeneous with uniform properties. Very low value of final moisture even at low drying temperatures. Inside Filter assembly with 5 Micron. Optional Features : Option for advance PLC Controls with HMI touch screen. Option for Flame Proof Electrical. Option for lump breaker. Option for condenser, Receiver & Cyclone for solvent recovery. Option for heating media steam/ hot water / hot oil. Safety Features : Temperature controls, Process controls, Vacuum relief valve, Over load protection and Emergency stop.

High precision low temperature vacuum Drying & Mixing Process Technology Application & Process : The Roto Double Cone Vacuum Dryer is suitable for drying the material which can not operate at low Temperature easily oxidized, poisonous in nature. The Double Cone Rotating Vacuum Drying Equipment is a new drier that integrates mixing and drying in the one body and equips with condenser and vacuum pump. Therefore the vacuum drier is formed. The drier is advanced in design, simple in inner structure, easy for cleaning, to discharge all raw material, convenient in operation and improving work environment. Meanwhile raw material is rotating accompanying with the rotating of container; raw materials cannot be accumulated onto the wall of container, so it has high efficiency heat transfer and high speed drying which save energy. Raw materials are dried uniformly and have good quality at low temperature. It can widely apply to dry raw materials of pharmaceuticals, chemical, Pesticides, foodstuff , dyestuff and so on industries. The equipment is in conformity with the requirements of "GMP". If the solvent does not recover, the condenser may be not used. 1. Material that cannot undertake high temperature. 2. Material that is easy to oxidize. 3. Material that do not permit to destruct. 4. To recover material with residual volatile. 5. Material with vigorous irritative and toxicity The Roto Cone Vacuum Drier consists of a jacketed double conical shell rotating around 6 RPM with under the state of vacuum inside the shell, pass steam or hot water in to jacket for heating. The large heating surface area presented by the internals of the cone ensures uniform drying of the product, as the product gently tumbles while the cone rotates slowly. The vaporized steam can be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat. The diffusive action induced by the tumbling cone constantly presents a fresh layer to come into contact with the indirectly heated walls of the shell, the dry speed of raw material is quickened and uniform drying efficiency is raised too. A well designed sealing system enable maintenance of deep vacuum inside the shell, and also ensures positive circulation of a heating media in the jacket. Salient Features : Design is cGMP - Current Good Manufacturing Practices compliance All Product contact parts AISI 316/ 316L & non contact parts AISI 304. Simple & compact Design for Easy to operate, clean, convenient & user friendly. Automated mixing and Drying process in single bowl. Dust free operation. High vacuum operation Low temperature drying. Solvent recovery Continuous rotation of container, material will make complex impacting motion in the container and reach to uniform mixing and drying at low temperature.. Continues vacuum maintenance during process. Vacuumized closed system with condenser, Receiver for solvent recovery & Cyclone separator to recovery the solid particle. Rapid & Complete discharge / Zero holdup after discharge The product dried is homogeneous with uniform properties. Very low value of final moisture even at low drying temperatures. Inside Filter assembly with 5 Micron. Safety Features : Temperature controls, Process controls, Vacuum relief valve, Over load protection and Emergency stop. Optional Features : Option for advance PLC Controls with HMI touch screen.. Option for Flame Proof Electrical. Option for lump breaker. Option for condenser, Receiver & Cyclone for solvent recovery. Option for heating media steam/ hot water / hot oil.

Yogeshwar Industries is rotocone vacuum dryer manufacturer in india. It has double conical vessel with rotating system and vacuum solvent recovery system. As the Dryer is rotating, there is no charring or retention of product, the result is that one can change the material to be dried without much ado.

Rotocone Vacuum Paddle Dryer, Bottle Air Jet Vacuum Cleaning Machine

Used Rotocone Vacuum Dryer, Used Zero Hold Sparkler Filter